Study on Lubricant Depletion Induced by Laser Heating in Thermally Assisted Magnetic Recording Systems: Effect of Lubricant Thickness and Bonding Ratio

In this study, we have carried out fundamental research on lubricant depletion due to laser heating in thermally assisted magnetic recording. In particular, we investigated the effects of lubricant film thickness and lubricant bonding ratio on lubricant depletion. Conventional lubricants Zdol2000 and Ztetraol2000 were used. The lubricant depletion characteristics due to laser heating were found to depend largely on the lubricant film thickness and material. That is, for films thicker than one monolayer, the lubricant depletion depth increased with the laser-irradiation duration, whereas the thickness of the lubricant after laser irradiation on the diamond-like carbon (DLC) films tended to remain at a constant film thickness of one monolayer. The lubricant depletion width gradually increased as the laser irradiation duration increased. The increasing trends for the lubricant depletion width were quantitatively very similar and almost independent of the initial lubricant film thickness. However, for lubricant films with thicknesses less than one monolayer, the lubricant depletion depth was very small. The lubricant depletion width increased remarkably to several hundred micrometers as the laser irradiation duration increased. The lubricant depletion depth and width were much smaller for Ztetraol2000 than Zdol2000. In addition, the lubricant-bonding ratio was found to greatly affect the lubricant depletion characteristics due to laser heating. In other words, the lubricant depletion depth and width decreased as the bonding ratio increased. The lubricant depletion mechanism involves the evaporation of mobile lubricant molecules when the maximum attained temperature is less than 100 °C. Another suggested lubricant depletion mechanism involves the thermocapillary stress effect, which is induced by the disk surface temperature gradient resulting from the non-uniformity of the laser spot intensity distribution.     

Improvement in the Oxidation Resistance of an Al-Deposited Fe–Cr–Al Foil by Preoxidation

The oxidation kinetics of conventional Fe–20Cr–5Al (in mass %) foil, Al-deposited foil and Al-deposited and preoxidized foil was studied at 1373 K in air. All the foils were 50-m thick and contained minor additions of rare-earth elements. The oxide scales were observed with SEM and TEM combined with EDS and were characterized with X-ray diffractometry and electron diffraction. The deposition of Al onto the foil from the vapor phase improves oxidation resistance. The details regarding this matter were reported elsewhere. The combination of the Al deposition and the subsequent preoxidation at 1173 K for 90 ks in air further increases the oxidation resistance, i.e., the smallest parabolic rate constant among the three kinds of foils, and excellent scale adherence. Preoxidation enhances the growth of -Al₂O₃, which transforms to -Al₂O₃ during subsequent oxidation. However, such -Al₂O₃ grains are much larger than those formed on the conventional foil of similar chemical composition. Small closed voids and small spinel-type, oxide particles appear in -Al₂O₃ grains with the progress of oxidation. The former is explained in terms of the volume decrease accompanying the phase transformation and the latter by the low solubility of Fe in -Al₂O₃.     

Inhibitory mechanisms of glycoprotein fraction derived from Miscanthus sinensis for the immediate phase response of an IgE-mediated cutaneous reaction

OBJECTIVE: To determine the risk factors for colonization or infection with methicillin-resistant Staphylococcus aureus in human immunodeficiency virus (HIV)-infected patients. DESIGN: Retrospective matched-pair case-control study. SETTING: Continuity clinic and inpatient HIV service of a university medical center. POPULATION: Patients with HIV infection from the general population of eastern and coastal Texas and from the Texas Department of Criminal Justice. DATA COLLECTION: Patient charts and the AIDS Care and Clinical Research Program Database were reviewed for the following: age, race, number of admissions, total hospital days, presence of a central venous catheter, serum albumin, total white blood cell count and absolute neutrophil count, invasive or surgical procedures, any cultures positive for S. aureus, and a history of opportunistic illnesses, diabetes, or dermatologic diagnoses. Data also were collected on the administration of antibiotics, antiretroviral therapy, steroids, cancer chemotherapy, and subcutaneous medications. RESULTS: In the univariate analysis, the presence of a central venous catheter, an underlying dermatologic disease, lower serum albumin, prior steroid therapy, and prior antibiotic therapy, particularly antistaphylococcal therapy or multiple courses of antibiotics, were associated with increased risk for colonization or infection with methicillin-resistant S. aureus. Multivariate analysis yielded a model that included presence of a central venous catheter, underlying dermatologic disease, broad-spectrum antibiotic exposure, and number of hospital days as independent risk factors for colonization or infection with methicillin-resistant S. aureus. CONCLUSIONS: In our HIV-infected patient population, prior hospitalization, exposure to broad-spectrum antibiotics, presence of a central venous catheter, and dermatologic disease were risk factors for acquisition of methicillin-resistant S. aureus.     

Increased growth of Bifidobacterium and Eubacterium by germinated barley foodstuff, accompanied by enhanced butyrate production in healthy volunteers

Germinated barley foodstuff (GBF) derived from the aleurone and scutellum fractions of germinated barley mainly consists of low-lignified hemicellulose and glutamine-rich protein. GBF improves the proliferation of intestinal epithelial cells and defecation, through the bacterial production of short chain fatty acids (SCFA), especially butyrate. In this study we investigated the mechanism of production of butyrate by microflora in humans and in vitro. Daily administration of 9 g GBF for 14 successive days significantly increased fecal butyrate content. Fecal Bifidobacterium and Eubacterium were also significantly increased by GBF administration in healthy volunteers. Ten anaerobic micro-organisms selected from intestinal microflora were cultured in vitro in the medium containing GBF as a sole carbon source (GBF medium). After a 3-day incubation, 7 strains (Bifidobacterium breve, Bifidobacterium longum, Lactobacillus acidophilus, Lactobacillus casei subsp. casei, Bacteroides ovatus, Clostridium butyricum, and Eubacterium limosum) lowered the medium pH producing SCFA. Eubacterium grown together with Bifidobacterium in GBF medium efficiently produced butyrate. On the other hand, GBF changed the intestinal microflora and increased probiotics such as Bifidobacterium in the intestinal tract. As a result, butyrate was produced by the mutual action of Eubacterium and Bifidobacterium. This butyrate is considered to enhance the proliferation of colonic epithelial cells.     

Measurement and analysis of reflector reactivity worth by replacing stainless steel with zirconium at the fast critical assembly (FCA)

A reflector reactivity worth was measured by replacing stainless steel with zirconium at the FCA. The experimental result of the positive reflector reactivity worth demonstrates the effectiveness of the zirconium reflector compared with the SS reflector in the fast reactor core. This paper also focuses on the validation of standard calculation methods used for fast reactors with JENDL-4.0. As a result, it is confirmed that the standard calculation methods for the reflector reactivity worth show agreement within the experimental error.     

Development of a novel image intensifier of an amplifiedmetal-oxide semiconductor imager overlaid with electron-bombardedamorphous silicon

We developed a novel image intensifier (II) of an amplified metal-oxide-semiconductor (MOS) imager (AMI) overlaid with electron-bombarded (EB) amorphous silicon (a-Si). The electron bombardment gain (EB gain) was 1500 at an accelerating voltage of 10 kV. Since the multiplication process was free from a phosphorescent screen and a coupling fiber plate as in the conventional II, the resolution was high and the picture quality was good and free from granularity noises, white spots, lag and sticking. As for fatigue of X-ray irradiation, the contrasts of a vertical stripe (Smear) are not detectable and damaged areas in AMI are weak whereas both of those in charge-coupled devices (CCDs) are strong     

Clinical application of 31P-chemical shift image using 31P-volume coil to Moyamoya disease

31P-MRS and 31P-Chemical Shift Image(CSI) using volume coil were applied to Moyamoya disease of 14 cases, data of which were compared with clinical manifestations and neuroimagings. In four asymptomatic cases, signal intensity of both total P and total ATP was almost equal in each voxel, but in other cases, both signal intensity of the lesion was relatively decreased, compared with non-lesion. Especially, signal intensity of total P and total ATP in ischemic lesion was significantly decreased. This showed that 31P-CSI is able to demonstrate cerebral ischemic lesion not detected by CT and MRI. We have reported on Moyamoya disease that 31P-MRS comparatively correlates to cerebral blood flow and 31P-CSI demonstrates ischemic lesion as not detected by CT and MRI less invasively.