Serial Changes of Serum Growth Factor Levels and Liver Regeneration after Partial Hepatectomy in Healthy Humans

This study aimed to investigate the associations of the serial changes of serum levels of various growth factors with liver regeneration after hepatectomy in healthy liver donors. Sixteen healthy liver donors who underwent conventional liver resection were included. Serum levels of various growth factors before hepatectomy and on postoperative day (POD) 1, 3, 5 and 7 were measured. Liver volume data calculated by multi-detector computed tomography using workstation. The ratio of remnant liver volume on POD 0 to liver volume before the operation was 51% ± 20%. The ratio of liver volume on POD 14 to liver volume on POD 0 were inversely correlated with remnant liver volume on POD 0 (r = −0.91). The ratio of liver volume on POD 14 to liver volume on POD 0 were significantly correlated with serum hepatocyte growth factor (HGF) levels on POD 1 (r = 0.54), serum leptin levels on POD 1 (r = 0.54), and serum macrophage colony-stimulating factor (M-CSF) levels on POD 5 (r = 0.76) and POD 7 (r = 0.80). These results suggest that early-phase elevation of serum levels of HGF, leptin and M-CSF may be associated with the acceleration of liver regeneration after hepatectomy in humans.     

Fabrication of integrated arrays of ultrahigh density magnetic nanowires on glass by anodization and electrodeposition

Integrated nanowire arrays of Fe-Pt, Co-Pt, and Ni-Pt alloys were successfully fabricated on glass substrates by successive anodization and electrodeposition. Porous alumina films, which were formed from an aluminum layers sputter-deposited on glass substrates covered with transparent oxide conductive films, were used as template-electrodes to deposit various magnetic alloys (Fe-Pt, Co-Pt, and Ni-Pt) in the nanopores by a cathodic electrodeposition, thus leading to integrated nanowire arrays with ultrahigh densities of (0.6-2.1) × 10¹⁵ wire m⁻². The as-deposited nanowires of Fe-Pt, Co-Pt, and Ni-Pt alloys are polycrystalline and composed of fine crystals (4-7 nm across) of chemically ordered tetragonal FePt, CoPt, or NiPt phase. The integrated nanowire arrays may be the promising candidate materials for ultrahigh density perpendicular magnetic recording media in terabits per square inch regime, due to the predictable enhanced perpendicular magnetic performance after appropriate annealing.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Synthesis of γ-Ga2O3-Al2O3 solid solutions by spray pyrolysis method

Synthesis of the γ-Ga₂O₃-Al₂O₃ solid solutions by spray pyrolysis was examined. Spherical particles were obtained using an aqueous solution of Al(NO₃)₃ and Ga(NO₃)₃ with HNO₃. For Ga-rich composition, γ-phase solid solutions were directly crystallized by the spray pyrolysis. For Al-rich composition, spray pyrolysis gave amorphous products unless a sufficient thermal energy was supplied during the spray pyrolysis. Subsequent calcination of the amorphous products gave γ-Ga₂O₃-Al₂O₃ solid solutions. However, physical properties of the solid solutions were affected by the spray pyrolysis conditions.     

Flexizymes: their evolutionary history and the origin of catalytic function

Transfer RNA (tRNA) is an essential component of the cell's translation apparatus. These RNA strands contain the anticodon for a given amino acid, and when "charged" with that amino acid are termed aminoacyl-tRNA. Aminoacylation, which occurs exclusively at one of the 3'-terminal hydroxyl groups of tRNA, is catalyzed by a family of enzymes called aminoacyl-tRNA synthetases (ARSs). In a primitive translation system, before the advent of sophisticated protein-based enzymes, this chemical event could conceivably have been catalyzed solely by RNA enzymes. Given the evolutionary implications, our group attempted in vitro selection of artificial ARS-like ribozymes, successfully uncovering a functional ribozyme (r24) from an RNA pool of random sequences attached to the 5'-leader region of tRNA. This ribozyme preferentially charges aromatic amino acids (such as phenylalanine) activated with cyanomethyl ester (CME) onto specific kinds of tRNA. During the course of our studies, we became interested in developing a versatile, rather than a specific, aminoacylation catalyst. Such a ribozyme could facilitate the preparation of intentionally misacylated tRNAs and thus serve a convenient tool for manipulating the genetic code. On the basis of biochemical studies of r24, we constructed a truncated version of r24 (r24mini) that was 57 nucleotides long. This r24mini was then further shortened to 45 nucleotides. This ribozyme could charge various tRNAs through very simple three-base-pair interactions between the ribozyme's 3'-end and the tRNA's 3'-end. We termed this ribozyme a "flexizyme" (Fx3 for this particular construct) owing to its flexibility in addressing tRNAs. To devise an even more flexible tool for tRNA acylation, we attempted to eliminate the amino acid specificity from Fx3. This attempt yielded an Fx3 variant, termed dFx, which accepts amino acid substrates having 3,5-dinitrobenzyl ester instead of CME as a leaving group. Similar selection attempts with the original phenylalanine-CME and a substrate activated by (2-aminoethyl)amidocarboxybenzyl thioester yielded the variants eFx and aFx (e and a denote enhanced and amino, respectively). In this Account, we describe the history and development of these flexizymes and their appropriate substrates, which provide a versatile and easy-to-use tRNA acylation system. Their use permits the synthesis of a wide array of acyl-tRNAs charged with artificial amino and hydroxy acids. In parallel to these efforts, we initiated a crystallization study of Fx3 covalently conjugated to a microhelix RNA, which is an analogue of tRNA. The X-ray crystal structure, solved as a co-complex with phenylalanine ethyl ester and U1A-binding protein, revealed the structural basis of this enzyme. Most importantly, many biochemical observations were consistent with the crystal structure. Along with the predicted three regular-helix regions, however, the flexizyme has a unique irregular helix that was unexpected. This irregular helix constitutes a recognition pocket for the aromatic ring of the amino acid side chain and precisely brings the carbonyl group to the 3'-hydroxyl group of the tRNA 3'-end. This study has clearly defined the molecular interactions between Fx3, tRNA, and the amino acid substrate, revealing the fundamental basis of this unique catalytic system.     

Effect of agglomeration of triacylglycerols on the stabilization of a model cream

This study has been carried out on solidification of a model cream using palm oil as a sole fat source. It was found that the addition of 1‐palmitoylglycerol to palm oil promoted the solidification of the model cream while the addition of 1‐oleoylglycerol had no such effect. Solid fat content of palm oil in the cream with 1‐palmitoylglycerol was found to be lower than those of palm oil and palm oil with 1‐oleoylglycerol after cooling from 60 to 5 °C. Crystallization behaviors of bulk palm oil and mixture of 1, 3‐dipalmitoyl‐ 2‐oleoyl‐glycerol (POP) and 1‐palmitoyl‐2, 3‐dioleoyl‐glycerol (POO) were then studied in the presence of monoacylglycerols. Formation of granular crystals was observed for palm oil and POP/POO mixture in the presence of 1‐palmitoylglycerol. HPLC of the granular crystals revealed that agglomeration of higher melting point triacylglycerols (TAGs) around 1‐palmitolyglycerol took place, which promoted the formation of granular crystals. It was suggested that the agglomeration of higher melting point TAGs around 1‐palmitoylglycerol which was preferentially adsorbed at the oil‐water interface of oil droplets in the model cream led to destabilization of oil‐in‐water emulsion and the solidification of the model cream. At the same time, it was suggested that the fatty acid moiety of emulsifiers played an important role in the agglomeration of TAGs and stabilization of o/w emulsions.     

Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

Synthesis of cyclic poly(methyl methacrylate) by the intramolecular cyclization of α-amino, ω-carboxyl heterodifunctional poly(methyl methacrylate)

Summary α-Amino, ω-carboxyl heterodifunctional poly(methyl methacrylate) was prepared by a living anionic polymerization of methyl methacrylate using N,N'-diphenylethylenediamine monolithium amide and succinic anhydride as an initiator and terminator, respectively. Its intramolecular cyclization was carried out to obtain a well-defined cyclic poly(methyl methacrylate). Received: 27 June 2001/Accepted: 16 July 2001     

Models for circular data from time series spectra

Circular data are those for which the natural support is the unit circle and its toroidal extensions. Numerous constructions have been proposed which can be used to generate models for such data. We propose a new, very general, one based on the normalization of the spectra of complex-valued stationary processes. As illustrations of the new construction's application, we study models for univariate circular data obtained from the spectra of autoregressive moving average models and relate them to existing models in the literature. We also propose and investigate multivariate circular models obtained from the high-order spectra of stationary stochastic processes generated using linear filtering with an autoregressive moving average response function. A new family of distributions for a Markov process on the circle is also introduced. Results for asymptotically optimal inference for dependent observations on the circle are presented which provide a new paradigm for inference with circular models. The application of one of the new families of spectra-generated models is illustrated in an analysis of wind direction data.     

Silver(I)-Ion-Mediated Cytosine-Containing Base Pairs: Metal Ion Specificity for Duplex Stabilization and Susceptibility toward DNA Polymerases

Spectroscopic characterization of Ag^I-ion-mediated C-Ag^I-A and C-Ag^I-T base pairs found in primer extension reactions catalyzed by DNA polymerases was conducted. UV melting experiments revealed that C-A and C-T mismatched base pairs in oligodeoxynucleotide duplexes are specifically stabilized by Ag^I ions in 1:1 stoichiometry in the same manner as a C-C mismatched base pair. Although the stability of the mismatched base pairs in the absence of Ag^I ions is in the order C-A≈C-T>C-C, the stabilizing effect of Ag^I ions follows the order C-C>C-A≈C-T. However, the comparative susceptibility of dNTPs to Ag^I-mediated enzymatic incorporation into the site opposite templating C is dATP>dTTP≫dCTP, as reported. The net charge, as well as the size and/or shape complementarity of the metal-mediated base pairs, or the stabilities of mismatched base pairs in the absence of metal ions, would be more important than the stability of the metallo-base pairs in the replicating reaction catalyzed by DNA polymerases.