Colour-odour correspondences in women during the menstrual cycle: Comparative analysis between the menstrual and ovulation phases

Women might experience modulation in their perception and cognition of colours and odours during the menstrual cycle, but how women's impressions of and correspondence between colours and odours differ according to the cycle changes remains unknown. Here, we experimentally examined women's performance of several tasks, including evaluation of impressions of colours and odours, matching/nonmatching of colours with odours, and identification of odours, comparing two phases: the beginning of menstruation and ovulation. The results showed that participants had similar impressions of colours and odours and made similar colour choices for odours in both the menstrual and ovulation phases, while “pleasant-unpleasant” impressions of colour and odour might vary according to the menstrual cycle. We found no significant differences in odour identification between the phases. The findings imply that hormonal changes during the menstrual cycle might affect “pleasant-unpleasant” impressions of colour and odour but not other features regarding impressions or crossmodal correspondence. In future studies, examination with a large number of participants is necessary.     

Methylcyclohexane dehydrogenation for hydrogen production via a bimodal catalytic membrane reactor

The dehydrogenation of methylcyclohexane (MCH) to toluene (TOL) for hydrogen production was theoretically and experimentally investigated in a bimodal catalytic membrane reactor (CMR), that combined Pt/Al₂O₃ catalysts with a hydrogen‐selective organosilica membrane prepared via sol‐gel processing using bis(triethoxysilyl) ethane (BTESE). Effects of operating conditions on the membrane reactor performance were systematically investigated, and the experimental results were in good agreement with those calculated by a simulation model with a fitted catalyst loading. With H₂ extraction from the reaction stream to the permeate stream, MCH conversion at 250°C was significantly increased beyond the equilibrium conversion of 0.44–0.86. Because of the high H₂ selectivity and permeance of BTESE‐derived membranes, a H₂ flow with purity higher than 99.8% was obtained in the permeate stream, and the H₂ recovery ratio reached 0.99 in a pressurized reactor. A system that combined the CMR with a fixed‐bed prereactor was proposed for MCH dehydrogenation. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1628–1638, 2015     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Boiling heat transfer characteristics of a sulfuric-acid flow in thermochemical iodine–sulfur cycle

The Japan Atomic Energy Agency has been conducting research and development on the thermo-chemical iodine–sulfur (IS) process, which is one of the most attractive water-splitting hydrogen production methods that uses nuclear thermal energy. The sulfuric acid decomposer is one of the key components of the IS process. The boiling heat transfer coefficients of sulfuric acid solutions are required to design the sulfuric acid decomposer. These coefficients were measured in aqueous solutions where the mole fraction of H₂O ranged from 0.17 to 0.37 (heat flux range from 16.9 kW/m² to 5.6 kW/m²) and compared with the empirical correlations formulated for binary mixtures. A combination of the Stephan–Körner correlation, using the empirical constant A₀ = 2.00, and the Nishikawa–Fujita correlation was used to predict the experimental results with an accuracy of ±10%.     

High-performance molecular-separation ceramic membranes derived from oxidative cross-linked polytitanocarbosilane

Polytitanocarbosilane (TiPCS)-derived ceramic membranes were fabricated using a pre-ceramic polymer. Special attention was focused on a process of thermal-oxidative curing that was used to induce cross-linking and the effect of this process on the ceramic yield, thermal stability, oxidation resistance, and microstructure of TiPCS. The cross-linked TiPCS powders showed a ceramic yield and thermal stability that were higher than that from the non-cross-linked version. In addition, the cross-linked TiPCS with uniform micropores showed higher levels of N₂ and CO₂ adsorption capacity, BET surface area, and micropore volume than the non-cross-linked versions, and the cross-linking process enhanced the stability of the pore structure at high temperature. The cross-linked TiPCS membranes showed high H₂ permeance (1.49 × 10⁻⁶ mol/(m² s Pa)) with sub-nanopores (H₂/SF₆ selectivity: 12 000, H₂/N₂: 10), and in addition higher oxidation resistance than their non-cross-linked counterparts. Furthermore, the influence of the concentration of the TiPCS precursor coating solution was optimized and the hydrothermal stability of the membranes at high temperatures was also evaluated. The optimized membrane demonstrated great performance for the pervaporation removal of methanol in binary azeotropic systems of either MeOH/butyl acetate or MeOH/toluene, and it also showed high hydrothermal stability with excellent dehumidification performance under high temperatures.     

Monolithiation of 5,5′‐Dibromo‐2,2′‐bithiophene Using Flow Microreactors: Mechanistic Implications and Synthetic Applications

The lithiation of 5,5′‐dibromo‐2,2′‐bithiophene with one equivalent of an alkyllithium such as n‐BuLi or s‐BuLi was studied by varying the residence time in flow microreactors. With a short residence time, the product 2,2′‐bithiophene (3) derived from dilithiation was obtained preferentially and a significant amount of the starting material 5,5′‐dibromo‐2,2′‐bithiophene remained unchanged. An increase in the residence time caused a higher yield of the product 5‐bromo‐2,2′‐bithiophene derived from monolithiation with expense in the yields of 2,2′‐bithiophene and 5,5′‐dibromo‐2,2′‐bithiophene. The lithiation using MeLi gave the product 5‐bromo‐2,2′‐bithiophene preferentially even with a very short residence time.     

Development of biobased microwave absorbing composites with various magnetic metals and carbons

The preparation and characterization of a biobased electromagnetic absorbing composites derived from natural lacquer as a renewable resource with microwave‐absorption fillers, including Ni–Zn ferrite and carbonyl iron (CI) as magnetic metals and soot and carbon nanotube (CNT) as carbon materials, were investigated in terms of the gel content, hardness, drying properties, and electromagnetic absorption properties. Interestingly, composites with ferrite and CI contained up to 320 and 550 wt %, respectively, of these compounds. This quite high loading capacity of the metal fillers in a natural‐lacquer base could have been due to the high compatibility between the filler and the natural lacquer; this indicated that the natural lacquer worked as a binder for these metals. The morphology of the biobased composite was characterized by scanning electron microscopy. The electromagnetic absorption properties of composites were characterized in the frequency range from 0.05 and 20 GHz by the reflection loss (RL) measurement method in terms of the kind of fillers and filler loading. The natural lacquer did not affect the absorption properties of the fillers. Biobased composites showed over 99% electromagnetic absorption in the frequency range 3.0–4.0 GHz for 280 wt % ferrite and 8.9–9.7 GHz for 200 wt % CI. Conversely, 10 and 20 wt % soot exhibited good performance (RL < ?20 dB) between 16.5 and 17.3 and between 8.8 and 9.2 GHz, respectively. The areas with RL values of less than ?20 dB of the CNT composites were 10.4–11.0 GHz for 5 wt % and 14.6–15.2 GHz for 10 wt %. Hence, natural lacquer can be used as a binder material for electromagnetic absorption composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44131.     

Fast Labelling of Natural Scenes Using Enhanced Knowledge

A new technique for labelling natural scenes is proposed. This technique labels disjoint regions on an image of a natural scene on the basis of knowledge about the relationship among objects. The proposed technique consists of three stages: (1) segmentation, (2) initial labelling, and (3) label improvement. One of the most promising previous techniques uses simulated annealing to find the solution, while our technique uses local hill-climbing with enhanced knowledge for speeding up the processing. Local hill-climbing is known to be easy to be captured by a local minimum. We solved this problem by enhancing the knowledge being used as constraints for the search. Our knowledge represents 1-to-n relationships among regions, pair-wise relationships of regions, and relative locations of the regions to the image. In addition, we introduced two region features: an entropy in intensity; and a linearity of contours of each region. The linearity evaluation aims to distinguish artificial objects from natural objects. The validity of the technique is supported by some experiments. These experiments showed that the proposed technique is much faster with the almost same accurate.     

A durable, shock-resistant electromagnetic optical scanner withpolyimide-based hinges

This paper presents a moving-coil electromagnetic optical scanner with newly developed hinge structure consisting of multilayered polyimide films with aluminum lead wires in between. The main purpose is to obtain a scanner with good durability and shock resistance for practical use. Polyimide has both features, and the aluminum lead wires, connecting the moving-coils and fixed electrode pads, are more reliable, because they are located inside the hinge, where the stress caused by torsional deformation and atmospheric degradation are minimal. An electromagnetic actuator is used to satisfy the following requirements; a millimeter-sized mirror, resonant and galvanometric operation, and scan angle control. Scanner prototypes with two different specifications (i.e., fast scanner and slow scanner) were fabricated and characterized. Driven with a sinusoidal current of ±20 mA, the fast scanner and the slow one vibrated with an optical scan angle (&thetas;_o) of 1° at the resonant frequency (f_r) of 1.7 kHz and &thetas;_o of 60° at f_r of 72 Hz, respectively. Durability was demonstrated with a shock test of 2500 G and a life test of over 13 000 h. By substituting sputtered aluminum driving coil with electroplated copper coil, improved &thetas;_o of 16.8° was obtained at f_r of 2.7 kHz