Measurement method of plasma current and density in atmospheric pressure plasma jet

We present a measurement method of the plasma current and density in an atmospheric‐pressure plasma generated using a quartz tube, helium gas, and copper foil electrode by applying a high RF voltage. The plasma in the form of a bullet is released as a plume or jet into the atmosphere. To study the characteristics of the atmospheric‐pressure plasma, the plasma current is measured using a current probe, and the drift velocity of plasma plume is measured using a photodetector. The current of the plasma plume is estimated by subtracting the ground line current from the power line current in the circuit. The density of plasma plume n is estimated from the plasma plume current I and the drift velocity v as I = envS, where S is the cross section of plasma plume. The density of the released plasma into the atmosphere is estimated as ∼10¹⁸ m⁻³ by the method. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of biobased microwave absorbing composites with various magnetic metals and carbons

The preparation and characterization of a biobased electromagnetic absorbing composites derived from natural lacquer as a renewable resource with microwave‐absorption fillers, including Ni–Zn ferrite and carbonyl iron (CI) as magnetic metals and soot and carbon nanotube (CNT) as carbon materials, were investigated in terms of the gel content, hardness, drying properties, and electromagnetic absorption properties. Interestingly, composites with ferrite and CI contained up to 320 and 550 wt %, respectively, of these compounds. This quite high loading capacity of the metal fillers in a natural‐lacquer base could have been due to the high compatibility between the filler and the natural lacquer; this indicated that the natural lacquer worked as a binder for these metals. The morphology of the biobased composite was characterized by scanning electron microscopy. The electromagnetic absorption properties of composites were characterized in the frequency range from 0.05 and 20 GHz by the reflection loss (RL) measurement method in terms of the kind of fillers and filler loading. The natural lacquer did not affect the absorption properties of the fillers. Biobased composites showed over 99% electromagnetic absorption in the frequency range 3.0–4.0 GHz for 280 wt % ferrite and 8.9–9.7 GHz for 200 wt % CI. Conversely, 10 and 20 wt % soot exhibited good performance (RL < ?20 dB) between 16.5 and 17.3 and between 8.8 and 9.2 GHz, respectively. The areas with RL values of less than ?20 dB of the CNT composites were 10.4–11.0 GHz for 5 wt % and 14.6–15.2 GHz for 10 wt %. Hence, natural lacquer can be used as a binder material for electromagnetic absorption composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44131.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Boiling heat transfer characteristics of a sulfuric-acid flow in thermochemical iodine–sulfur cycle

The Japan Atomic Energy Agency has been conducting research and development on the thermo-chemical iodine–sulfur (IS) process, which is one of the most attractive water-splitting hydrogen production methods that uses nuclear thermal energy. The sulfuric acid decomposer is one of the key components of the IS process. The boiling heat transfer coefficients of sulfuric acid solutions are required to design the sulfuric acid decomposer. These coefficients were measured in aqueous solutions where the mole fraction of H₂O ranged from 0.17 to 0.37 (heat flux range from 16.9 kW/m² to 5.6 kW/m²) and compared with the empirical correlations formulated for binary mixtures. A combination of the Stephan–Körner correlation, using the empirical constant A₀ = 2.00, and the Nishikawa–Fujita correlation was used to predict the experimental results with an accuracy of ±10%.     

Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

EXPERIMENTAL STUDIES ON A NOVEL CHEMICAL HEAT PUMP DRYER USING A GAS-SOLID REACTION

The authors have been studying Chemical Heat Pumps (CHP) from the viewpoints of energy saving and environmental impact. The CHP can store thermal energy in the form of chemical energy by an endothermic reaction, and release it at various temperature levels during heat demand periods by exo/endothermic reactions. The authors have proposed in an earlier study a novel chemical heat pump (CHP) system for environmentally-friendly effective utilization of thermal energy in drying as a chemical heat pump dryer (CHPD). In this exploratory study, we test the effectiveness of operating the proposed CHPDs experimentally. Basic experiments on the CHPDs such as hot dry air production for convective drying are performed on lab-scale CHPD apparatuses using gas-solid reactions in calcium oxide/calcium hydroxide reactant beds. The proposed CHPDs are found to produce hot air by CHP operation for drying. The temperature levels of the produced hot air and the reaction rates/conversions are as good as in the case of hot water supply system using basically same CHP operation. The cold heat for air dehumidification is also found to be generated/recovered by the same CHPD system. The generated heat amounts can be increased by changing the operating conditions although the heat recovery must be enhanced for practical application of CHPDs.