Computed tomography reconstruction from two transmission measurements for iodine-marked cancer detection

The authors invented the transXend detector, which measures X-rays as electric currents, and then gives the energy distribution of the X-rays after an unfolding process. In a previous paper, it was shown that the material thickness distributions can be estimated with the transXend detector by using reference points plotted from the electric current ratios, such as the I ₂/I ₁ ? I ₃/I ₁ graph, where I_i denotes the electric current measured by the i-th segment of the transXend detector. In this paper, the tomographic images of iodine, aluminum, and the acrylic those surround the other two materials are reconstructed from their material thickness distributions, which are estimated from two X-ray incidence directions. The X-ray event ratios are also used to estimate the material thickness distributions.     

Surface wettability of silicon rubber after irradiation with a glow discharge plasma

Silicon rubber, PDMS, was irradiated by Ar, Ar/H₂ and Ar/O₂ plasmas to increase the surface wettability to water which was found to increase with the irradiation time for every application of plasma irradiation. The use of Ar/O₂ plasma was found to be particularly effective in enhancing the surface wettability. The aging behavior due to exposure to air, ethanol or water was also measured. In the case of continuous exposure to water after plasma treatment, the wettability could be maintained for more than several months with the water immersion.     

Prevalence, populations and pheno- and genotypic characteristics of Listeria monocytogenes isolated from ready-to-eat vegetables marketed in São Paulo, Brazil

Detection of food-borne viruses such as noroviruses, rotaviruses and hepatitis A virus in food products differs from detection of most food-borne bacteria, as most of these viruses cannot be cultivated in cell culture to date. Therefore, detection of food-borne viruses in food products requires multiple steps: first, virus extraction; second, purification of the viral genomic material (RNA for the majority of food-borne viruses); and last, molecular detection. This review is focused on the first step, the virus extraction. All of the numerous published protocols for virus extraction from food samples are based on 3 main approaches: 1) (acid adsorption-) elution-concentration; 2) direct RNA extraction; and 3) proteinase K treatment. This review summarizes these virus extraction approaches and the results obtained from published protocols. The use of process controls is also briefly described.     

Construction of hydrogen fermentation from garbage slurry using the membrane free bioelectrochemical system

The aim of this study was to show the effectiveness of the membrane free bioelectrochemical system (BES) using three electrodes on inhibition of methanogenesis and construction of hydrogen fermentation from the artificial garbage slurry. The electrical redox-potential on the working electrode was adjusted to -1.0V (vs. Ag/AgCl) that has positive effect on methanogenesis. The redox-potential on the counter electrode was measured to be 1.6V. The pH in the effluents was 5.5-6.4. Hydrogen production rate at the cathode side was similar to that at the anode side and much higher than that calculated from current, and reached a maximum of 2445±815 (average±standard deviation) mL?L(-1)?d(-1) at an organic loading rate of 58.7g dichromate chemical oxygen demand per L d(-1). Methane production was negligible throughout the experiment. Acetate and butyrate were the main products of the fermentation using a BES; these offered favorable conditions for hydrogen production. The bacterial community in the bioelectrochemical hydrogen fermentor differed from that in the methanogenic seed sludge and included hitherto unknown species. These results show that high redox-potential on the anodic electrode and acidic pH in the membrane free BES can be utilized for hydrogen fermentation from the artificial garbage slurry by avoiding methanogenesis.     

Development of an active targeting liposome encapsulated with high-density colloidal gold for transmission electron microscopy

Active targeting of the liposome is an attractive strategy for drug delivery and in vivo bio-imaging. We previously reported the specific accumulation of Sialyl Lewis X (SLX) liposome to inflamed tissue in arthritic model mice or tumor-bearing mice. SLX-liposome encapsulation with fluorescent substances allows for the visualization of these liposomes by the time-dependent transvascular accumulation of fluorescent signals in the histological sections. In the present study, we developed a new SLX-liposome encapsulated with colloidal gold for transmission electron microscopic observation. We herein describe the characterization of the colloidal gold-loaded SLX-liposomes and demonstrate its specific targeting to the endothelial cells of tumor blood vessels in tumor-bearing mice.     

Microstructural degradation mechanisms during creep in strength enhanced high Cr ferritic steels and their evaluation by hardness measurement

There are two creep regions with different creep characteristics: short-term creep region “H”, where precipitates and subgrains are thermally stable, and long-term creep region “L”, where thermal coarsening of precipitates and subgrains appear. In region “H”, the normalized subgrain size (λ-λ₀)/(λ^∗-λ₀) has a linear relation with creep strain and its slope is 10ε⁻¹. But, region L is the time range in which the static recovery and the strain-induced recovery progress simultaneously. In this region, the static recovery accelerates the strain-induced recovery, and subgrain size is larger than that line which neglects the contribution of the static recovery. In region “L”, the Δλ/Δλ^∗-strain present a linear relation with a slope 35ε⁻¹. There is a linear relation between hardness and subgrain size. Hardness drop, H₀ − H, as a function of Larson-Miller parameter can be a good measure method for assessment of hardness drop and consequently degradation of microstructure. Hardness drop shows an identical slope in creep region “H”, whereas hardness drop due to thermal aging and creep in region “L” show together a similar slope. In region “H”, degradation of microstructure is mainly due to recovery of subgrains controlled by creep plastic deformation, and precipitates do not have a major role. However, in creep region “L”, there are three degradation mechanisms that accelerate creep failure; (1) strain-induced recovery of subgrains due to creep plastic deformation, (2) static-recovery of subgrains and precipitates and (3) strain-induced coarsening of precipitates due to the appearance of static-recovery.     

Remarkable effect of ordered mesoporous carbon support in tantalum oxide-catalyzed selective epoxidation of cyclooctene

The olefin epoxidation is one of the most important reactions in chemical industry. Metal oxide supports often cause drawbacks in catalytic activity and selectivity, which has been overcome by introducing hydrophobic organic groups onto the oxide supports. The present study utilizes ordered mesoporous carbon (CMK-3 and CMK-1) as structurally defined hydrophobic catalyst support. Well-dispersed tantalum oxides supported on the ordered mesoporous carbon were prepared. Their application in catalytic epoxidation of cyclooctene demonstrates that the tantalum oxide catalysts on the ordered mesoporous carbon supports show higher performances than those of the catalysts supported on activated carbon and ordered mesoporous silica SBA-15.     

Viewpoints to characterize precision evaluation methods in binary measurements

Precision evaluation in quantitative measurements is a thoroughly discussed topic and the established methods are in use. Many methods are proposed for qualitative data including binary data, but their effectiveness and statistical properties are not so clear.