Damage evolution behavior of CFRP laminates under post-impact fatigue with water absorption environment

In this study, the damage evolution behavior was evaluated considering the effect of the textile structure and water absorption. Damage observation was conducted by the integration of non-destructive and direct observation methods. Candidate textile reinforcements were T300-3k plain woven fabric (PW) and T700S-12k multi-axial knitted fabric (MA). The effect of water absorption on the performances of compression after impact (CAI) and PIF were small in PW CFRP laminates. Conversely, PIF properties of water-absorbed MA CFRP laminates drastically decreased than that of dry ones. CAI strength was not affected by water absorption. PIF performance of dry MA CFRP was fairly higher than that of the others. From the precise observation, some evidences of interfacial deterioration caused by water absorption were confirmed in both PW and MA CFRP laminates.     

A versatile planar QCM-based sensor design for nonlabeling biomolecule detection

Despite high theoretical sensitivity, low-cost manufacture, and compactness potentially amenable to lab-on-a-chip use, practical hurdles have stymied the application of the quartz crystal microbalance (QCM) for aqueous applications such as detection of biomolecular interactions. The chief difficulty lies in achieving a sufficiently stable resonance signal in the presence of even minute fluctuations in hydrostatic pressure. In this work, we present a novel versatile planar sensor chip design (QCM chip) for a microliter-scale on-line biosensor. By sealing the quartz resonator along its edges to a flat, solid support, we provide uniform support for the crystal face not exposed to solvent, greatly decreasing deformation of the crystal resonator under hydrostatic pressure. Furthermore, this cassette design obviates the need for direct handling when exchanging the delicate quartz crystal in the flow cell. A prototype 27-MHz sensor signal exhibited very low noise over a range of flow rates up to 100 microL/min. In contrast, signals obtained from a conventional QCM sensor employing an O-ring-based holder were less stable and deteriorated even further with increasing flow rate. Additional control designs with intermediate amounts of unsupported undersurface yielded intermediate levels of stability, consistent with the interpretation that deformation of the crystal resonator under fluctuating hydraulic pressure is the chief source of noise. As a practical demonstration of the design's high effective sensitivity, we readily detected interaction between myoglobin and surface-bound antibody.     

Fabrication of heterostructures of halogen-bridged quasi-one-dimensional mixed-valence transition metal complexes

Single-heterostructure crystals of a series of halogen-bridged quasi-one- dimensional mixed-valence transition metal complexes (HMMCs) were fabricated by selective coordination epitaxial growth (SCE growth). The overgrowth crystals of the HMMC were grown on the columnar crystals of the substrate HMMC in solution. The single-heterostructure crystals were epitaxially grown only when the two HMMCs had similar crystal structures. If their crystal structures were different, no heterostructure crystal was grown. This result suggests that the degree of mismatch between the crystal structures of the substrate and the overgrowth is the predominant factor which determines the SCE growth of the HMMCs.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Identification of Multiple Domains of Entamoeba histolytica Intermediate Subunit Lectin-1 with Hemolytic and Cytotoxic Activities

Galactose and N-acetyl-D-galactosamine-inhibitable lectin of Entamoeba histolytica have roles in the pathogenicity of intestinal amoebiasis. Igl1, the intermediate subunit lectin-1 of E. histolytica, has been shown to have both hemolytic and cytotoxic activities that reside in the C-terminus of the protein. To identify the amino acid regions responsible for these activities, recombinant proteins were prepared and used in hemolytic and cytotoxic assays. The results revealed that Igl1 has multiple domains with hemolytic and cytotoxic activities and that amino acids 787-846, 968-1028 and 1029-1088 are involved in these activities. The hemolytic activities of the fragments were partly inhibited by mannose, galactose and N-acetylgalactosamine, and glucose showed lower or negligible inhibitory effects for the activities. This is the first report of a protozoan protein with hemolytic and cytotoxic activities in multiple domains.     

Assistant force compensation for hand movement of patients by using exogenous signals and/or neurophysiological signals

Because functional diseases of the brain can cause disabilities related to human movement control, a compensation method was developed for improving the performance of hand movements. The compensation for human hand movements can be carried out by adding an assistant force that is generated from artificial equipment attached to a human arm. From the experiment on visual target tracking, it was found that the tracking trajectory was adequately represented by a dynamic model of the motion of an articulated industrial robot arm, and the different abilities for movement control among healthy people and patients were classified by different model parameters as position loop gain, velocity loop gain, and response delay. Dynamic force compensation was approached by considering the different control features of the patients. The effectiveness of the proposed compensation method was verified in a simulation study on an actual industrial robot arm. A human-machine interface, e.g., a brain-computer interface (BCI), for realizing the control of artificial equipment to compensate for human hand movements is also presented and discussed.     

MOCVD preparation of SBTN thin films from two organometallic sources bottles

Abstract

SrBi₂(Ta_0.7Nb_0.3)₂O₉ (SBTN) films were first prepared on (111)Pt/Ti/SiO₂/Si substrates by MOCVD from only two organometallic source bottles. Bi(CH₃)₃ and the mixture of Sr[Ta(O°C₂H₅)₆]₂ and Sr[Nb(O°C₂H₅)₆]₂ were used as source materials. High compositional reproducibility was obtained; the Nb/(Ta+Nb) ratio was the same as the mixing ratio of the source. Sr/(Ta+Nb) and Bi/(Ta+Nb) ratios can be controlled by the reactor pressure and the input gas flow rate ratio of the source gases. Almost single phase of SBTN was obtained for the film deposited at 500°C and the following heat-treated at 800°C in O₂ atmosphere. Pr and Ec values of 330 nm-thick SBTN film were 8.5 μC/cm² and 91 kV/cm, respectively and were larger than those of SrBi₂Ta₂O₉ film. There was no degradation after 5x10¹⁰ cycles polarization switching.     

东京电力公司采用特高压输电技术的论证经过

东京电力公司(Tokyo Electric Power Company,TEPCO)在20世纪90年代建成了1000kV南北输电线路和1000kV东西输电线路.文中介绍了日本选择特高压输电技术的经过和TEPCO采用特高压输电的必要性,指出了选择特高压交流最高运行电压时应考虑的因素;还对交流输电方式和直流输电方式进行了比较,分析了直流输电方式存在的问题,说明了TEPCO在特高压输电中采用交流输电方式的原因.对中国发展特高压输电有一定的借鉴意义.     

Double-action bending for eliminating springback in hat-shaped bending of advanced high-strength steel sheet

The International Journal of Advanced Manufacturing Technology - This paper presents a novel technology called ‘double-action bending (DAB)’ to eliminate springback in hat-shape forming...     

基于媒体独立切换并提供QoS保证的跨UMTS和WiMAX无线异构网络的网络切换方案

The rapid growth and innovation of the various mobile communication technologies have caused a change in the paradigm of internet access. Wireless technologies such as WiMAX, WiFi and UMTS/LTE networks have shown great potential in dominating the wireless access markets. The existence of various access technologies requires a means for seamless internetworking to provide anywhere, anytime services without interruption in the ongoing session, especially in multimedia applications with rigid Quality of Services (QoS) requirements. The IEEE 802.21 Media Independent Handover (MIH) working group was formed to develop a set of mechanisms under a standard framework with the capability to support migration of mobile users across heterogeneous networks. Therefore, the implementation of handover is extremely important in the heterogeneous network environment. In order to guarantee various QoS requirements during handover execution especially in multimedia applications, in this paper we propose a novel MIH-based capacity estimation algorithm to execute handover with QoS provision supporting both horizontal and vertical handovers across UMTS and WiMAX networks. Simulation shows that the proposed mechanism achieves lower call dropping rate (highest approximate 3% ) and higher system throughput (average 92% ) than the basic handover method does.