2.5 Gb/s CPFSK coherent multichannel transmission experiment forhigh capacity trunk line system

A 2.5-Gb/s CPFSK four-channel FDM transmission experiment has been conducted with a 150-km-long nondispersion-shifted fiber. This system employed a wideband channel space controller, a common polarization control, and a channel identification function. These were indispensable for realizing a high-capacity, coherent FDM trunk line system. The results of the experiment confirm the feasibility of trunk line systems with over 160-Gb/s capacity     

Time division multiplexed OTDR system

A new technique to increase the effective sampling rate of an optical time-domain reflectometer using a time division multiplexing digital sampling averaging procedure is proposed. This permits an increase in distance measuring accuracy of an optical time-domain reflectometer.     

Novel repeated batch operation for flash fermentation system: Experimental data and mathematical modelling

A novel repeated batch operation mode was proposed for ethanol fermentation, where the fermenter beer was periodically exchanged between the fermenter with biomass recycle and the distillation unit, to promote the selective removal of ethanol. Using the mathematical model developed, as based on the experimental results, the optimal operation of the proposed method was shown to attain high performance, with a productivity of about 12 g dm⁻³ h⁻¹ and a product concentration of 400 g dm⁻³.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Characterization of neurons differentiated from mouse embryonic stem cells using conditioned medium of dorsal root ganglia

Mouse embryonic stem (ES) cells have the pluripotent ability to differentiate in vitro into various cell lineages, including neurons. Adding chick dorsal root ganglion (DRG) conditioned medium (CM) to the culture medium promotes the differentiation of ES cells into neurons. We determined the types of neurons that differentiate from ES cells. The addition of DRG-CM caused nearly half of all ES cells on the periphery of the colony sphere to differentiate into neurons. Immunofluorescence analysis showed that the neurons that differentiated from ES cells were mainly motor, GABAergic, serotonergic, and cholinergic neurons. Of particular note, flow cytometry showed that approximately 50% of betaIII-tubulin-positive neurons were motor neurons. This indicates that DRG-CM induces ES cells to differentiate into motor neurons as target of DRG neurons (sensory neurons).     

Positive-temperature-coefficient effect of electrical resistivity below melting point of poly(vinylidene fluoride) (PVDF) in Ni particle-dispersed PVDF composites

This paper discusses the positive-temperature-coefficient effects of resistivity in Ni particle-dispersed poly(vinylidene fluoride) (PVDF) composites based on experiment results from SEM, DSC, and pressure-volume-temperature (PVT) measurements. The melting points of composites with Ni content of 20, 30, 40, and 50vol.% were equal to that of pure PVDF. The PTC effects in composites with Ni content of 40 and 50vol.% occurred at temperatures near the melting point of the PVDF matrix, whereas those in composites with Ni content of 20 and 30vol.% occurred at temperatures below the melting point of the PVDF matrix. We found that the PTC effect occurs even without melting of the matrix polymer. Moreover, we determined that a slight increase in specific volume at temperatures below the melting point of the matrix polymer acts fully as a driving force for forming a gap between fillers. This suggestion was backed up by theoretical analyses using percolation theory and a thermal-fluctuation-induced tunneling model.     

Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Oxidative coupling of methane over LaCoO3−δ-based mixed oxides

The catalytic activity of LaCoO_3–-based mixed oxides for the oxidative coupling of methane has been tested by TPR and cyclic reaction. Characterization has been done by XRD, TGA and Mössbauer spectrometry. It is likely that the perovskite-crystal structure containing hypervalent metal ions has an important role and that unique structural oxygen species in the perovskite contribute to the partial oxidation of methane.