Structural analysis of oriented poly(ε‐caprolactone) including CaCO3 particles with 13C solid‐state NMR

The results of a study of the relation between the oriented structure and drawn Poly(ε‐caprolactone) specimens including CaCO₃ particles and their dynamic mechanical properties are presented. The loss elasticity, E″, showed almost the same curve for both undrawn sheets and drawn sheets as a function of CaCO₃ content. On the other hand, the storage modulus, E′, of drawn sheets increased nonlinearly with increasing CaCO₃ content, and their curve showed lower E′ values than those of undrawn sheets. By simulation of ¹³C CP NMR spectra of drawn PCL/CaCO₃ sheets, both oriented and unoriented components were observed. The distribution parameter, p, of drawn PCL/CaCO₃ sheets was 13°, which was larger than those (8°) of drawn PCL. Further, the fraction of the unoriented component increased with increasing CaCO₃ content. Thus, adding CaCO₃ particles into the PCL, the arrangement of the oriented component was disturbed and decreased. In addition, from the line shape analyses of ¹³C CP MAS NMR spectra, four peaks were obtained in not only undrawn sheets but also in drawn sheets of both PCL and PCL/CaCO₃ compounds. Besides, structural change occurred at only drawn PCL/CaCO₃ sheets. Therefore, the change in dynamic mechanical properties observed only for drawn PCL/CaCO₃ sheets were strongly dependent on the orientational structure, which was formed under shear stress of the stretching drawn process. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2376–2382, 2001     

Reduction of cyclic speed change using a bandpass filter for compressor PMSM sine‐wave position sensorless drives

Position sensorless vector control has been applied to compressor drive systems using an IPMSM to realize higher efficiency. In this paper, reduction control of cyclic speed change is proposed in order to achieve improved performance, including low vibration and low acoustic noise. Designing a speed estimator by using an adaptive observer with a wide frequency band, the fundamental frequency component of the cyclic speed change is calculated by a bandpass filter. The proposed compensation method recognizing the fundamental component can reduce the cyclic speed change to an acceptable level. The principle of the compensation method is presented along with experimental results. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 75–84, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20765     

Synthesis of MDI and PCL-diol-based polyurethanes containing [2] and [3]rotaxanes and their properties

We have successfully synthesized novel polyurethanes where PU1 contains a [3]rotaxane that consists of N-3,5-di-tert-butylbenzyl-N-3-hydroxypropylammonium hexafluorophosphate (AOH1) and N,N′-Dimethyl-N,N′-bis(dibenzo-24-crown-8)-terephthalamide (BisC) as well as PU2 contains a [2]rotaxane that consists of AOH1 and dibenzo-24-crown-8 ether. Diphenylmethanediisocyanate (MDI), 1,4-butanediol (BD) and poly(ε-caprolactone)diol (PCL) were used as an isocyanate, chain expander, and soft segment, respectively. A polyurethane without any rotaxane structures (PU0) were also prepared as a reference polymer. The existence of the rotaxanes in the polyurethanes was confirmed by ¹H NMR spectroscopy and TGA measurement. ATR-FT-IR spectral measurement revealed that the rotaxanes disturb the formation of hydrogen bonding between the polyurethane chains. From the DSC result, the rotaxanes retard the recrystallization of the PCL unit whereas no influence on the glass transition temperatures of the polyurethanes was observed. The retarding effect appeared remarkably with PU1. These thermal behaviors of the polyurethanes were also supported by viscoelastic measurement. In tensile test, the tensile strength and break of strain of PU1 were larger than those of PU2.     

Impurity‐Induced First‐Order Phase Transitions in Highly Crystalline V2O3 Nanocrystals

A first‐order phase transition in a bulk material is generally considered to arise at extended defects such as grain boundaries or dislocations, where the energetic barrier between the two phases is reduced. Downsizing a crystal to the nanoscale can exclude the number of defects, leading to enhanced kinetic stabilization of the metastable phase. Here, the disappearance of the first‐order metal–insulator transition in defect‐free V₂O₃ nanocrystals and the revival of the transition by introducing a certain Cr or Ti impurity content are investigated. The hysteresis width of the transition corresponding to the barrier height decreases with the impurity content. It is proposed that homogeneous impurity doping is a universal method that can control the occurrence of a first‐order phase transition in nanoscale materials.     

Soluble carbon nanotubes and their applications

Carbon nanotubes (CNTs) have been the forefront of nanoscience and nanotechnology due to their unique electrical and mechanical properties and specific functions. However, due to their poor solubility in solvents, the applications using the materials have been limited. Therefore, strategic approaches toward the solubilization of CNTs are important in wide fields including chemistry, physics, biochemistry, biology, pharmaceuticals, and medical sciences. In this article, we summarize: (i) the strategic approaches toward the solubilization of CNTs using chemical and physical modifications, (ii) nanocomposites of CNTs and biological molecules including DNA, (iii) formation of CNTs with topological structures, (iv) separation of metallic and semiconducting nanotubes, (v) the preparations of films and fibers of CNTs and hybrid materials of CNTs and organic and inorganic molecules.     

Acceptor specificity of trehalose phosphorylase from Thermoanaerobacter brockii: production of novel nonreducing trisaccharide, 6-O-alpha-D-galactopyranosyl trehalose

We investigated the acceptor specificity of a thermostable trehalose phosphorylase from Thermoanaerobacter brockii ATCC 35047 (TbTP) was examined using beta-D-glucose-1-phosphate (beta-G1P) as a glucosyl donor and oligosaccharides as the acceptor. Oligosaccharides with a reducing-end glucose residue as the C-6 substituent (e.g., isomaltose, gentiobiose, melibiose, isomaltotriose, and isopanose) were found to be successful acceptors. The transfer products of isomaltose, gentiobiose, and melibiose were isolated and characterized as 6-O-alpha-D-glucopyranosyl trehalose (alpha-GlcTre), 6-O-beta-D-glucopyranosyl trehalose (beta-GlcTre), and 6-O-alpha-D-galactopyranosyl trehalose (alpha-GalTre), respectively. To produce alpha-GalTre, a novel nonreducing trisaccharide, the reaction conditions of alpha-GalTre were examined using trehalose as a glucosyl donor. As a result, the yield of alpha-GalTre reached 40.5%.     

A 5‐in. flexible ferroelectric liquid‐crystal display driven by organic thin‐film transistors

Abstract— An organic thin‐film‐transistor (OTFT) driven color flexible ferroelectric‐liquid‐crystal (FLC) display with 160 × 120 pixels and a resolution of 50 ppi has been developed. The flexible FLC was fabricated on a pentacene‐OTFT array using printing and lamination techniques. To drive the display at a fast driving speed, an OTFT was developed with a short channel length having a large current output. The fabricated OTFT array with a channel length of 5 μm exhibits a carrier mobility of 0.3 cm²/V‐sec and an ON/OFF ratio of over 10⁷ at a low drain voltage of ?6 V. A field‐sequential‐color system with a flexible backlight unit was also developed and used to drive the display. Color moving images were successively shown on the 5‐in. display using an active‐matrix driving technique of the OTFT.     

Ultra-sensitive high-speed density measurement of the “piston effect” in a critical fluid

In order to conduct a detailed investigation of the piston effect, the peculiar heat transportation phenomenon in critical fluids, an ultra-sensitive high-speed density measurement system was developed using a very thin heater, a sensitive interferometer and a large-capacity high-speed data acquisition system. As the first step of the investigation, an experiment was conducted to measure the velocity of sound in CO2 near its critical point. Short heat pulses suppressing the disturbance of natural convection were applied to a small cell filled with almost-critical CO2 fluid and were detected by the measurement system. Because the pulses propagated through the cell at the velocity of sound and were reflected several times between the cell walls, the velocity could be precisely determined by measuring the time intervals between successive reflections. The resulting velocity profile versus temperature showed good agreement with theoretical prediction and numerical simulations. This result validated the density measurement system, and it is considered that the measurement system will be a very effective tool for further studies on critical phenomena with the aid of numerical simulation.     

Pressureless Sintering and Reaction Mechanisms of Ti3SiC2 Ceramics

Easy sinterable Ti₃SiC₂ powder was synthesized from a powder mixture with a molar ratio of 1.0 Ti, 0.3 Al, 1.2 Si, and 2.0 TiC by heating at 1200°C in the flowing Ar. Here, the Al powder acts as a deoxidation agent and provides a liquid phase for the reaction. The powder compacts subjected to pressureless sintering at 1300°C in Ar had a relative density up to 99%. The results of chemical analysis and the measured lattice constant suggest that the Al–Si liquid phase was formed at approximately 1200°C and that liquid‐phase sintering was promoted by the 0.1 molar ratio of Al and the 0.2 molar ratio of Si remaining in excess. The three‐point bending strength, fracture toughness, and electrical resistivity of the sintered samples were 380 MPa, 4.1 MPa m^1/2, and 0.34μΩm, respectively.