Radiation detector made of a high-quality polycrystalline diamond

Radiation detector was made of a high-quality CVD polycrystalline diamond composed of frost column like structure diamond grains, and induced charge distribution spectra and drift velocities were measured by using alpha particles. As a result, the CVD polycrystalline achieved maximum induced charge of 83% of HP/HT type IIa diamond. Moreover, the CVD crystal had lower charge loss on electrons compared with the HP/HT type IIa diamond. Drift velocities of electrons and holes were v_e = 7.7 × 10⁴ and v_h = 7.3 × 10⁴cm/s at an electric field of 20 kV/cm, respectively. In addition, response function measurement for 14 MeV neutrons was carried out.     

Preparation and characterization of electroplated amorphous gold-nickel alloy film for electrical contact applications

A process for electroplating amorphous gold-nickel alloy with the atomic ratio of unity was developed. The plating bath was prepared by adding potassium cyanoaurate(I) into a known plating bath which produces amorphous nickel-tungsten alloy. At a sufficiently high gold concentration, the alloy deposit did not contain any tungsten. The amorphous nature of the Au-Ni alloy produced in the new bath was confirmed by using TEM and THEED. Hardness, resistivity, and contact resistance of this new alloy were determined, and the results are discussed for applications as an electrical contact material.     

Investigation of the effect of surface phosphate ester dispersant on viscosity by coarse-grain modeling of BaTiO slurry

To understand the role of phosphate ester dispersant, we investigated the rheology of a BaTiO slurry. For the model case, a coarse-grain molecular dynamics (CGMD) simulation was performed with the butyral polymer didodecyl hydrogen phosphate (DHP) in the toluene/ethanol solvent. By systematically analyzing the effect of DHP from an atomic-scale first principle and from all-atom MD to microscale CGMD simulation, we investigated how the adsorption of a DHP dispersant on a BaTiO surface affects the microstructure rheology of a BaTiO slurry. The first-principle and all-atom MD simulation suggests that DHP molecules prefer to locate near the BaTiO surface. CGMD simulation shows a reduction in viscosity with an increase in dispersants, suggesting that the dispersant population near the BaTiO surface plays a key role in controlling the rheology of the BaTiO slurry. In this study, we propose an approach for understanding the BaTiO slurry with molecular-level simulations, which would be a useful tool for efficient optimization of slurry preparation.     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.     

Evaluation of optimum condition for designing high‐performance electro‐driven polymer hydrogel systems

This study investigated a parameter that determines an optimum condition of the content of the ionic group and the concentration of outer solution for high‐performance electro‐driven polymer hydrogel membranes. The optimum condition for quick bending was determined by a simple method that identified the initial conditions based on Donnan equilibrium theory. Since the bending behavior depends on the initial conditions of the ionic group content and the concentration of the outer solution, it can be predicted by the ratio of the ionic concentrations at the membrane–solution interface; the inverse of the Donnan ratio (1/K) at the initial condition. The bending rate of the membranes showed a maximum value at around 1/K = 0.15. The relationship between several interrelated control factors and the bending dynamics of the gel membranes was established by using the initial system parameters alone. 1/K is the effective simple parameter to determine the optimum condition of the content of the ionic group and the concentration of the outer solution for high‐performance membranes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 111–118, 2000     

Diamond-like carbon thin film with controlled zeta potential for medical material application

With the purpose of applying diamond-like carbon (DLC) thin films as a biocompatible material, we experimented with introducing functional groups such as amino and carboxyl groups to the surface of DLC thin films by plasma surface treatment. From the results, it was found that the contact angle values of the DLC thin films surface were decreased with increasing in the OCO bonded network on the surface. Measurement of the zeta potential when the amounts of the functional groups were varied showed that this successfully varied the zeta potential over the wide range of − 48 mV to + 12 mV. It was found that when carboxyl groups are introduced by O₂ plasma modification of the DLC thin films surface, the zeta potential was lower than that of untreated DLC thin films sample. It was also found that amino groups can be introduced to the DLC thin films surface by NH₃ plasma treatment, the zeta potential was higher than that of untreated DLC thin films sample. This means that zeta potential of the DLC thin films can also be controlled by controlling these two functional groups. Therefore, we have succeeded in developing a multifunctional DLC thin films that does not use polymers and is suitable as a biocompatible material.     

Application of tritium radioluminography to the detection of hydrogen diffusion in Ti-Cr alloy

Tritium radioluminography has been applied to determine the hydrogen (H) diffusion coefficients in Ti₅₀Cr₅₀ and Ti₄₀Cr₆₀ alloys, both with two-phase structures of a body-centered cubic (bcc) phase and a Laves phase. Using radioluminography, H distributions in those phases have been observed, and H penetration profiles have been measured. The tritium diffusion coefficients in the Ti₅₀Cr₅₀ and Ti₄₀Cr₆₀ alloys have been successfully determined by analyzing the tritium penetration profiles to be 3.3±0.3 × 10^?12 and 1.4±0.1×10^?12 m²/s, respectively. These values suggest that the H diffusion in the Laves phase is slower than that in the bcc phase. It is also suggested that H diffuses by short-circuiting diffusion through the interface between the bcc phase and the Laves phase.     

Control of island formation on silicon surfaces using ultra-high-vacuum scanning electron microscopy

In situ scanning electron microscopy has been used to control Au island formation on a patterned Si(111) surface with a periodic array of atomic-step bunches and holes. Liquid phase Au-Si islands were observed to redistribute on the patterned surface by annealing. The islands accumulate at a particular position of the step bunch in each pattern unit. This phenomenon is interpreted in terms of the energetic stability of a droplet on a patterned surface.     

Speech recognition using pulse-coupled neural networks with a radial basis function

We have developed a novel pulse-coupled neural network (PCNN) for speech recognition. One of the advantages of the PCNN is in its biologically based neural dynamic structure using feedback connections. To recall the memorized pattern, a radial basis function (RBF) is incorporated into the proposed PCNN. Simulation results show that the PCNN with a RBF can be useful for phoneme recognition. This work was presented in part at the 7th International Symposium on Artificial Life and Robotics, Oita, Japan, January 16–18, 2002     

A 0.65-ns, 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM

An ultrahigh-speed 72-kb ECL-CMOS RAM macro for a 1-Mb SRAM with 0.65-ns address-access time, 0.80-ns write-pulse width, and 30.24-μm ² memory cells has been developed using 0.3-μm BiCMOS technology. Two key techniques for achieving ultrahigh speed are an ECL decoder/driver circuit with a BiCMOS inverter and a write-pulse generator with a replica memory cell. These circuit techniques can reduce access time and write-pulse width of the 72-kb RAM macro to 71% and 58% of those of RAM macros with conventional circuits. In order to reduce crosstalk noise for CMOS memory-cell arrays driven at extremely high speeds, a twisted bit-line structure with a normally on MOS equalizer is proposed. These techniques are especially useful for realizing ultrahigh-speed, high-density SRAM's, which have been used as cache and control storages in mainframe computers