Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Information gathering and searching approaches on the Web

The information accessible through the Internet is increasing explosively as the Web is getting more and more widespread. In this situation, the Web is indispensable information resource for both of information gathering and information searching. Though traditional information retrieval techniques have been applied to information gathering and searching in the Web, they are insufficient for this new form of information source. Fortunately some Al techniques can be straightforwardly applicable to such tasks in the Web, and many researchers are trying this approach. In this paper, we attempt to describe the current state of information gathering and searching technologies in the Web, and the application of AI techniques in the fields. Then we point out limitations of these traditional and AI approaches and introduce two aapproaches: navigation planning and a Mondou search engine for overcoming them. The navigation planning system tries to collect systematic knowledge, rather than Web pages, which are only pieces of knowledge. The Mondou search engine copes with the problems of the query expansion/modification based on the techniques of text/web mining and information visualization. Seiji Yamada, Dr. Eng.: He received the B.S., M.S. and Ph.S. degrees in control engineering and artificial intelligence from Osaka University, Osaka, Japan, in 1984, 1986 and 1989, respectively. From 1989 to 1991, he served as a Research Associate in the Department of Control Engineering at Osaka University. From 1991 to 1996, he served as a Lecturer in the Institute of Scientific and Industrial Research at Osaka University. In 1996, he joined the Department of Computational Intelligence and Systems Science at Tokyo Institute of Technology, Yokohama, Japan, as an Associate Professor. His research interests include artificial intelligence, planning, machine learning for a robotics, intelligent information retrieval in the WWW, human computer interaction, He is a member of AAAI, IEEE, JSAI, RSJ and IEICE. Hiroyuki Kawano, Dr.Eng.: He is an Associate Professor at the Department of Systems Science, Graduate School of Informatics, Kyoto University, Japan. He obtained his B.Eng. and M.Eng. degrees in Applied Mathematics and Physics, and his Dr.Eng. degree in Applied Systems Science from Kyoto University. His research interests are in advanced database technologies, such as data mining, data warehousing, knowledge discovery and web search engine (Mondou). He has served on the program committees of several conferences in the areas of Data Base Systems, and technical committes of advanced information systems.     

A single-solenoid pulsed-magnet system for single-crystal scattering studies

We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.     

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model

We present a compact formula for describing the mean frictional forces acting on a molecule in multicomponent systems. The friction-based diffusion theory of Zielinski and Hanley was extended to newly include the friction-average molar velocity as a reference frame. The results showed that the previous diffusion theories are unified by the friction-average concept by properly choosing the average velocity. The present model based on the diffusivity-related molar average velocity provides better predictions for the diffusive flux in a ternary miscible liquid compared to the other existing theories. The application of the model in phase-separating ternary systems revealed that the introduction of a highly diffusive third component into demixing polymer blends promotes a particular enhancement of the spinodal decomposition due to the difference in the frictional interactions between polymers.     

Plasma glucagon after total resection of the pancreas in man

Serial measurements of plasma "true glucagon" (PG) and of glucagon-like immunoreactive materials (GLI) were carried out during and after total resection of the pancreas in a 62-year-old man with calcified pancreatitis. The postoperative course of this patient was uneventful and diabetes was well controlled. PG disappeared from the blood within 30 min after resection of the pancreas. In spite of the evidence that no pancreatic tissue was present in the abdomen, PG was detected again in the blood from 18 hr after total pancreatectomy until the ninth postoperative day. However, plasma PG did not rise following infusion of arginine during the fourteenth postoperative week. After an initial decrease, plasma GLI rose abruptly on the second postoperative day and remained elevated thereafter. The fluctuations of plasma PG and GLI were not parallel.     

SiO2 thin film deposition on the inner surface of a poly(tetra-fluoroethylene) narrow tube by atmospheric-pressure glow microplasma

SiO₂ thin films were deposited on the inner surfaces of a commercial poly(tetrafluoroethylene) narrow tube with an inner diameter of 0.5 mm using tetraethoxysilane/O₂ feedstock gases and He carrier gas by atmospheric-pressure microplasma-enhanced chemical vapor deposition. A glow microplasma was generated inside the tube by radio frequency (RF) capacitively coupled discharge. X-ray photoelectron spectroscopy spectra showed that the tube inner surface was covered by a SiO₂ thin film. Transparent SiO₂ thin films were obtained with a deposition rate of 230 nm/min at an RF power of 6 W and substrate temperature of 100 °C. The wettability of the SiO₂-coated tube was about 3 times as large as that of an untreated sample tube.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Effects of neural refractoriness on spatio-temporal variability in spike initiations with Electrical stimulation.

In this paper, the effects of neural refractoriness on action potential (spike) initiations with electrical stimulation are investigated using computer modeling and simulation techniques. The computational model was composed of a myelinated nerve fiber with 50 nodes of Ranvier, each consisting of stochastic sodium and potassium channels, making it possible to represent the fluctuations of spike initiation. A series of two-pulse stimuli was presented by a stimulating electrode above the central (26th) node of Ranvier. The amplitude of the first (masker) pulse stimulus was set such that the masker pulse stimulus evoked spikes on each trial, while that of the second (probe) pulse stimulus was set such that the probe pulse stimulus evoked spikes on a half of trials, threshold values. Then the transmembrane potentials in response to the probe pulse stimulus were recorded at each node (i.e., 1-50 nodes) in order to determine the spike initiation node and time. From the observation of the spike initiation node and time, a spatio-temporal histogram as well as a spatial variability and a temporal variability of spike initiations was generated which allowed us to interpret fluctuations in spike initiation node and time. It was shown that the distribution of spike initiations tended to become greater spatially and longer temporally as the masker-probe intervals (MPIs) of the two-pulse stimuli shortened. It was also shown that the number of activated sodium channels as functions of space and time tended to become smaller due to inactivation of sodium channels and varied spatially and temporally as MPIs shortened. These findings may imply that the stochastic sodium channels during a relative refractory period may contribute to enhancing the fluctuations in spike initiations, and give us an insight into encoding information with electric stimuli to improve the performance of the prosthetic devices, especially cochlear implants.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.