CuO/SnO2-In2O3 sensor for monitoring CO concentration in a reducing atmosphere

The CO sensing property of CuO-loaded SnO₂-In₂O₃ sensor was investigated in a reducing atmosphere. The sensor response to CO for CuO/SnO₂-In₂O₃ (8/2) was much higher than that for CuO/SnO₂ in the range of 200-1000 ppm of CO concentration. Such a high sensor response of CuO/SnO₂-In₂O₃ may originate from the high dispersion of CuO playing a role as sensing site.     

Properties of variations in the periods of ring neural oscillators with noise

Effects of additive noise on a series of the periods of oscillations in unidirectionally coupled ring neural networks of ring oscillator type are studied. Kinematical models of the traveling waves of an inconsistency, i.e. the successive same signs in the states of adjacent neurons in the network, are derived. A series of the half periods in the network of N neuron is then expressed by the sum of N sequences of the N-first order autoregressive process, the process with the spectrum of exponential type and the first-order autoregressive process. Noise and the interaction of the inconsistency cause characteristic positive correlations in a series of the half periods of the oscillations. Further, an experiment on an analog circuit of the ring neural oscillator was done and it is shown that correlations in the obtained periods of the oscillations agree with the derived three expressions.     

Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Information gathering and searching approaches on the Web

The information accessible through the Internet is increasing explosively as the Web is getting more and more widespread. In this situation, the Web is indispensable information resource for both of information gathering and information searching. Though traditional information retrieval techniques have been applied to information gathering and searching in the Web, they are insufficient for this new form of information source. Fortunately some Al techniques can be straightforwardly applicable to such tasks in the Web, and many researchers are trying this approach. In this paper, we attempt to describe the current state of information gathering and searching technologies in the Web, and the application of AI techniques in the fields. Then we point out limitations of these traditional and AI approaches and introduce two aapproaches: navigation planning and a Mondou search engine for overcoming them. The navigation planning system tries to collect systematic knowledge, rather than Web pages, which are only pieces of knowledge. The Mondou search engine copes with the problems of the query expansion/modification based on the techniques of text/web mining and information visualization. Seiji Yamada, Dr. Eng.: He received the B.S., M.S. and Ph.S. degrees in control engineering and artificial intelligence from Osaka University, Osaka, Japan, in 1984, 1986 and 1989, respectively. From 1989 to 1991, he served as a Research Associate in the Department of Control Engineering at Osaka University. From 1991 to 1996, he served as a Lecturer in the Institute of Scientific and Industrial Research at Osaka University. In 1996, he joined the Department of Computational Intelligence and Systems Science at Tokyo Institute of Technology, Yokohama, Japan, as an Associate Professor. His research interests include artificial intelligence, planning, machine learning for a robotics, intelligent information retrieval in the WWW, human computer interaction, He is a member of AAAI, IEEE, JSAI, RSJ and IEICE. Hiroyuki Kawano, Dr.Eng.: He is an Associate Professor at the Department of Systems Science, Graduate School of Informatics, Kyoto University, Japan. He obtained his B.Eng. and M.Eng. degrees in Applied Mathematics and Physics, and his Dr.Eng. degree in Applied Systems Science from Kyoto University. His research interests are in advanced database technologies, such as data mining, data warehousing, knowledge discovery and web search engine (Mondou). He has served on the program committees of several conferences in the areas of Data Base Systems, and technical committes of advanced information systems.     

A single-solenoid pulsed-magnet system for single-crystal scattering studies

We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.     

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model

We present a compact formula for describing the mean frictional forces acting on a molecule in multicomponent systems. The friction-based diffusion theory of Zielinski and Hanley was extended to newly include the friction-average molar velocity as a reference frame. The results showed that the previous diffusion theories are unified by the friction-average concept by properly choosing the average velocity. The present model based on the diffusivity-related molar average velocity provides better predictions for the diffusive flux in a ternary miscible liquid compared to the other existing theories. The application of the model in phase-separating ternary systems revealed that the introduction of a highly diffusive third component into demixing polymer blends promotes a particular enhancement of the spinodal decomposition due to the difference in the frictional interactions between polymers.     

SiO2 thin film deposition on the inner surface of a poly(tetra-fluoroethylene) narrow tube by atmospheric-pressure glow microplasma

SiO₂ thin films were deposited on the inner surfaces of a commercial poly(tetrafluoroethylene) narrow tube with an inner diameter of 0.5 mm using tetraethoxysilane/O₂ feedstock gases and He carrier gas by atmospheric-pressure microplasma-enhanced chemical vapor deposition. A glow microplasma was generated inside the tube by radio frequency (RF) capacitively coupled discharge. X-ray photoelectron spectroscopy spectra showed that the tube inner surface was covered by a SiO₂ thin film. Transparent SiO₂ thin films were obtained with a deposition rate of 230 nm/min at an RF power of 6 W and substrate temperature of 100 °C. The wettability of the SiO₂-coated tube was about 3 times as large as that of an untreated sample tube.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.