Evaluation of energy technologies to realize sustainable systems

Degradation of the global environment and depletion of resources are threatening sustainable development of mankind. In particular, climate change caused by increasing greenhouse gases is one of the most serious issues in analyzing energy systems. This paper aims at proposing frameworks to investigate sustainability and at evaluating technologies for sustainable energy systems. For this purpose, we first define the index of sustainable limits on resource depletion and emissions. Sustainability of mineral and energy resources is evaluated based on the index. Estimations indicate that energy resources and CO₂ are unsustainable, and that we should introduce technologies to reduce energy consumption and CO₂ emissions. Life cycle energy requirements are assessed for photovoltaic systems as representatives of the technologies. Through the life cycle assessment, we quantitatively evaluate measures to improve life cycle energy requirements and capital costs. At the same time, we clarify the direction of research and development required for technologies to realize sustainable energy systems. © 1999 Scripta Technica, Electr Eng Jpn, 130(2): 25–31, 2000     

Development of a simulator to calculate an optimal slab heating pattern for reheat furnaces

To improve energy consumption and to meet quality requirements for the slab heating process of reheat furnaces in hot strip mills, a new optimal slab heat pattern calculation simulator has been developed. The simulator consists of the following functions; (1) two-dimensional (slab thickness direction and slab length direction) slab temperature calculation function, which is capable of calculating skidmarks along the length of a slab, (2) furnace heat balance calculation function, (3) optimizing calculation function of slab heat pattern using a linear programming method. The simulator developed has been installed into a furnace computer control system for an actual plant. This paper describes the functions of the simulator and simulation results using the simulator. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 120 (3): 42–53, 1997     

Mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions at 25.0°

The mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions were determined at 25.0° for dilute to saturated concentrations, together with the activities of water. In the dilute solutions of scandium halides, the activity coefficients were obtained from electromotive force measurements on galvanic cells, and the osmotic coefficients of all four solutions above 0.1 mol kg⁻¹ were determined from the isopiestic measurements. Least-squares equations were fitted to these coefficients, which were then used to calculate the mean molal activity coefficients and water activities. The relationships between these results and the corresponding activity data for other rare earth salts, and to the cation hydration and ionic interactions, are discussed. The results on scandium perchlorate solutions suggested that the inner-sphere hydration number of tervalent scandium ion may be seven.     

Evaluation of the impact of bioaugmentation and biostimulation by in situ hybridization and microelectrode

Three rotating disk biofilm reactors were operated to evaluate whether bioaugmentation and biostimulation can be used to improve the start-up of microbial nitrification. The first reactor was bioaugmented during start-up period with an enrichment culture of nitrifying bacteria, the second reactor received a synthetic medium containing NH(4)(+) and NO(2)(-) to facilitate concomitant proliferation of ammonia- and nitrite-oxidizing bacteria, and the third reactor was used as a control. To evaluate the effectiveness of bioaugmentation and biostimulation approaches, time-dependent developments of nitrifying bacterial community and in situ nitrifying activity in biofilms were monitored by fluorescence in situ hybridization (FISH) technique and microelectrode measurements of NH(4)(+), NO(2)(-), NO(3)(-), and O(2). In situ hybridization results revealed that addition of the enrichment culture of nitrifying bacteria significantly facilitated development of dense nitrifying bacterial populations in the biofilm shortly after, which led to a rapid start-up and enhancement of in situ nitrification activity. The inoculated bacteria could proliferate and/or survive in the biofilm. In addition, the addition of nitrifying bacteria increased the abundance of nitrifying bacteria in the surface of the biofilm, resulting in the higher nitrification rate. On the other hand, the addition of 2.1mM NO(2)(-) did not stimulate the growth of nitrite-oxidizing bacteria and did inhibit the proliferation of ammonia-oxidizing bacteria instead. Thus, the start-up of NO(2)(-) oxidation was unchanged, and the start-up of NH(4)(+) oxidation was delayed. In all the three biofilm reactors, data sets of time series analyses on population dynamics of nitrifying bacteria determined by FISH, in situ nitrifying activities determined by microelectrode measurements, and the reactor performances revealed an approximate agreement between the appearance of nitrifying bacteria and the initiation of nitrification activity, suggesting that the combination of these techniques was a very powerful monitoring tool to evaluate the effectiveness of bioaugmentation and biostimulation strategies.     

Changes in dietary bioaccumulation of tributyltin chloride (TBTCl) in red sea bream (Pagrus major) with the concentration in feed

The effect of the concentration of tributyltin (TBT) in feed on the dietary bioaccumulation of tributyltin chloride (TBTCl) was studied in an 8-week uptake experiment and a 4-week elimination experiment using red sea bream (Pagrus major). The biomagnification factor (BMF) and the assimilation efficiency (AE) decreased from 0.30 to 0.15 and from 13% to 5.9%, respectively, as the TBT concentration in feed increased from 1.3 to 20 microg/g. The elimination rate constant (k(2)) was independent of the TBT concentration in the fish. Laboratory measurements of the BMF and AE of TBTCl underestimate actual field values if highly contaminated feed is used. Judging from the BMF and AE, the risk of the bioaccumulation of TBTCl through the food chain might be smaller than that of polychlorinated biphenyls.     

Effects of phenol on the properties of pitch produced thermally from the petroleum vacuum residue

A petroleum vacuum residue was thermally treated at 430 °C, with continuous addition of phenol to either the vapour phase or the liquid phase of the reacting system. Addition of phenol to the vapour phase increased the yield of the cracked oil and the fixed carbon of the residual pitch. When phenol was charged to the liquid phase, the yield of the oil remained unchanged, but the amount of the benzeneinsoluble matter in the pitch decreased, probably owing to the inhibition by phenol of the polymerization-condensation reactions of aromatic compounds. In both additions the cracked oil had a higher boiling point than that produced without phenol. Substitution of phenol with methyl groups increased the extent of cracking and coking properties (Roga Index) of the pitch. The effective order of phenol and its derivatives is: Phenol < m-Cresol < o-Cresol < p-Cresol < 2, 4-Dimethylphenol < 2, 6-Dimethylphenol < 2, 4, 6-Trimethylphenol Polyhydric phenol, e.g. catechol, and naphthol also enhanced the cracking reactivity of the residue.     

Analysis of capacitance ratio of a rectangular X-cut length-extensional mode quartz crystal resonator by stresses

The electrical properties of an X-cut, length-extensional mode quartz crystal resonator of a cut angle theta around the X-axis were calculated by a variational method using stresses as trial functions. Analytical expressions of stresses were estimated by a linear regression on a cut angle best-fit to the results of finite-element method. The calculated dependence of the capacitance ratio on the cut angle was consistent with the measured results.     

Thermal ratcheting of solder-bonded layered plates: cyclic recovery and growth of deflection

This paper describes computational analysis of the thermal ratcheting of solder-bonded layered plates subjected to cyclic thermal loading following solder-bonding. Finite element computations of Si/solder/Cu layered plates are performed by taking into account mechanical ratcheting of the copper as well as temperature-dependent creep of the solder. A sophisticated non-linear kinematic hardening model is used for appropriately representing mechanical ratcheting of the copper; a temperature-dependent power-law creep model is assumed for the solder. It is shown that the layered plates can exhibit either the cyclic recovery or the cyclic growth of deflection depending on the extent of plastic yielding in the copper layer, and that the cyclic recovery always occurs if the copper layer is elastic. It is also demonstrated that the cyclic recovery of deflection can be much greater than the static recovery of deflection at a constant temperature.