The development of simplified ultrasonic CT system and its application to the evaluation of weld metal

In this paper, as a new measurement method to estimate the change of material condition, the simplified ultrasonic CT system, which uses the information of three directions, that is, 90°, + 45° and −45° about inspection plane is proposed. Use of simplified CT system has two merits: Firstly, the measurement time is very short compared with general CT. Secondly, it can detect sensitively small defect in vertical or slant direction about inspection plane because the obtained image is CT image calculated from three directions. From these merits, this method can be considered as an effective method to evaluate material conditions. The basic performance of the proposed method was confirmed through several specimens with several simple defects. In order to confirm the applicability of actual NDT, several kinds of welded specimens are investigated. The result showed that the CT image obtained had good agreement with actual defect of specimens.     

Selective sorption of heavy metal thiocyanate complexes on crown ether resin

The sorption behavior of heavy metal thiocyanate complexes was investigated for dibenzo-18-crown-6 (DB18C6) resin and bis[2-(o-methoxyphenoxy)ethyl]ether (BMPE) resin. The DB18C6 resin showed a high sorption ability and the degree of zinc sorption increased significantly with thiocyanate concentration. This behavior was not observed for BMPE resin. The sorption behavior was influenced by the countercation species, and the degree of sorption of zinc ions showed the maximum when the potassium thiocyanate was used as a complexing salt. The sorbed species appear to be KZn(SCN)₃, K₂Zn(SCN)₄ in the potassium thiocyanate system, and Zn(SCN)₂ in the lithium thiocyanate system, respectively, according to analysis of the sorption equilibrium. Sodium and ammonium thiocyanate systems show an intermediate behavior of the two. The sorption selectivity for DB18C6 resin depended not only on the hydrophobic nature of heavy metal thiocyanate complexes but also on the stabilization of counter cation species with crown ether matrix, and the sorption selectively was found to be effectively controlled by countercation species according to the cation-chelation mechanism.     

Multi-fluid multi-phase subchannel analysis of subassembly accidents of LMFRs

Analyses of experiments simulating hypothetical subassembly accidents such as a large-scale inlet blockage in a Liquid Metal Cooled Fast Reactor (LMFR) have been performed with computer program KAMUI. With the use of relatively simple but reasonable constitutive models, the code has been applied to the SCARABEE experiments BE+1 and APL1 to validate the analytical capability against the accident conditions under the multi-pin geometry. The results show that the key events such as sodium boiling, clad melting, molten clad relocation, molten clad freezing were adequately simulated taking into account the effect of heat loss to the coolant flow in the outside channel of the test section.     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Control of Snow Falling Flow around NACA0015 Blade using a Plasma Electrode with Weather Resistant Design

The plasma actuation (PA) effect on the snow falling flow was investigated using a plasma electrode with weather resistant design and the natural snow wind facility of the Hokkaido University of Science. NACA0015 test blade with chord length c of 300 mm was used. Wind tunnel tests were carried out under the angle of the attack of the blade was fixed at 15 degrees, and the main flow velocity is U=5 m/s. PIV (Particle image velocimetry) measurements were conducted on various PA conditions using natural dry snowflakes as a tracer. When the actuator was driven under the condition of the fundamental frequency of F=50 kHz, and the pulsed modulated frequency f of fc/U=1 and Duty ratio (Ratio of plasma ON time to pulse duration time) =1%, movement of snowflakes was controlled the most effectively tested. It was clarified that the fundamental frequency of PA also affects the control of snow flow. Under snowfall conditions, the weather resistant designed plasma electrode has suffered no damage and operated successfully.     

Purification and characterization of an extracellular alpha-neoagarooligosaccharide hydrolase from Bacillus sp. MK03

An agarolytic bacterium was isolated from soil in Gifu prefecture, Japan, and identified as Bacillus sp. strain MK03. The strain secreted neoagarooligosaccharide hydroluse into the culture medium. The enzyme was purified 49.7-fold from the culture fluid by ammonium sulfate precipitation and anion-exchange and gel-filtration column chromatographic methods. The purified enzyme appeared as a single band on polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate (SDS)-PAGE. Estimations of the molecular mass by gel filtration and SDS-PAGE gave values of 320 kDa and 42 kDa, respectively, indicating that the enzyme is octametric. The enzyme cleaved the alpha-1,3 linkage in neoagarobiose to produce 3,6-anhydro-L-galactose and D-galactose. It also selectively cleaved the alpha-1,3 linkage at the nonreducing end in neoagarotetraose or neoagarohexaose to give 3,6-anhydro-L-galactose and agarotriose or agaropentaose. The optimum temperature and pH for the enzyme were 30 degrees C and 6.1, respectively. The N-terminal amino acid sequence showed no homology to sequences of other known neoagarooligosaccharide hydrolases and agarases.     

Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Sub-millimeter-long carbon nanotubes repeatedly grown on and separated from ceramic beads in a single fluidized bed reactor

A semi-continuous fluidized-bed process is reported which rapidly converts acetylene into carbon nanotubes (CNTs). Catalysts are first immobilized on ceramic beads and CNTs are then grown on the beads and then separated from them in a repetitive process accomplished within a single reactor simply by switching gases at a fixed temperature. CNTs of 6–10 nm diameter, three walls on average, 0.4 mm length and 99 wt.% purity were synthesized at an yield of over 70% in a reactor residence time shorter than 0.3 s. The easy and efficient production of such CNTs with in situ separation from the catalysts may accelerate the development of CNT-based nanotechnology industries.