Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Calderon's preconditioning for periodic fast multipole method for elastodynamics in 3D

Preconditioning methods based on Calderon's formulae for the periodic fast multipole method for elastodynamics in 3D are investigated. Three different types of formulations are proposed. The first type is a preconditioning just by appropriately ordering the coefficient matrix without multiplying preconditioners. The other two types utilise preconditioners constructed using matrices needed in the main fast multipole method algorithms. We make several numerical experiments with proposed preconditioners to confirm the efficiency of these proposed methods. We also conclude that the preconditioning of the first type is faster with respect to the computational time than other preconditioning methods discussed in this article. Copyright © 2012 John Wiley & Sons, Ltd.     

Forgetting curve of cricket,Gryllus bimaculatus,derived by using serotonin hypothesis

It is thought that the adjustment of intraspecific aggression is an essential factor in the development of a social structure. To understand the natural laws for organizing the social structure, we focus on the fighting behavior of crickets, Gryllus bimaculatus, and investigate the neuronal mechanisms to adjust aggressiveness associated with a neuromodulatory biological amine: serotonin (5-HT).In this paper, we present a working theory of a neurophysiological mechanism based on the past biological studies on the 5-HT hypothesis, and a mathematical model of the mechanism. We analyzed this model and concluded that this neurophysiological mechanism makes the forgetting process slower. Next, we fitted our theoretical forgetting curve to an experimental curve and estimated the parameters of our model. These estimated values were in agreement with common belief in biological science.     

An overview on the cellulose based conducting composites

Biopolymer based composites have been employed in numerous applications with increasing interest not only due to renewable, eco-friendly nature, but also because of the flexibility in processing conditions and competitive cost of their end products. The conductive materials from biopolymers have been found applicable in robots, medical imaging, sensitive membranes, actuators, visual displays, electronic wiring and shielding, and components in batteries. Cellulose is one of the most abundant biopolymers in the nature, which has received special attention for development of conducting materials due to biocompatibility for protein and drug immobilization and ability to form the composites with synthetic polymers. The present review is aimed to provide concisely the current status in this field of conducting composites from cellulose, with brief discussions of associated problems and future applications.     

Calibration of multiple kinects with little overlap regions

When using multiple Kinects, there must be enough distances among neighboring Kinects to avoid spoiled range data caused by the interference of their infrared speckle patterns. In the arrangement, their overlapped regions are too small to apply existing calibration methods using correspondences between their observations straightforwardly. Therefore, we propose a method to calibrate Kinects without large overlapped regions. In our method, first, we add extra RGB cameras in an environment to compensate overlapped regions. Thanks to them, we can estimate their camera parameters by obtaining correspondences between color images. Next, for accurate calibration, which considers range data as well as color images of Kinects, we optimize the estimated parameters by minimizing both the errors of correspondences between color images and those of range data of planar regions, which exist in a general environment such as walls and floors. Although our method consists of conventional techniques, its combination is optimized to achieve the calibration. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Categorical formulation of mathematical design theories applied to system design process analysis

Given hierarchical system specifications, embodiment and integration processes of subsystems are crucial in designing complex engineered systems. To complement the current mathematical design theories that do not sufficiently support these processes, this study applies general design theory to formulate these processes based on the mathematical structure of design knowledge studied in the literature using category theory. Specifically, the composition of embodiment operations and the relations among subsystems in integration operations on the category of sets and topological spaces are elucidated. Furthermore, the formulation is applied to analysis of a system design process of a production line in model-based systems engineering.     

Experimental analysis of 2D-unsteady temperature field by using Mach-Zehnder interferogram images

A measurement method for an unsteady temperature field by using a Mach-Zehnder interferometer and image processing technique is presented. In this study, the results measured by this method were compared with the calculated results under Reynolds numbers (Re = UL/v) ranging to less than 350 in the steady-state. The unsteady characteristics of the local Nusselt numbers (Nu_x = α_xL/λ) around an elastically vibrating plate were investigated under the conditions that the reduced frequency (N = 1/Ro) ranged from 4.8 to 8.6 and the amplitude of vibration was kept small relative to the plate length. In this study it was clarified that the distributions of the Local Nusselt numbers were observed flutteringly, and that the phase of the time-averaged Nusselt number is delayed compared to the phase of the velocity at the trailing edge. These results indicate that the enhancement of the time-averaged heat transfer coefficient around the vibrating plate depended on the Rossby number. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 88–102, 1996     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996