云存储中加密数据的自适应重复删除方法

为了保护个人隐私,用户倾向于在数据上传至云服务器之前将其加密. 相同的明文数据被加密成不同密文数据,使云服务器无法识别出重复的加密数据. 现存的解决方案多数倚赖可信第三方,且没有划分数据流行度,导致安全性与执行效率较低. 提出一种无需可信第三方的自适应重复删除方法.利用完美散列函数检查数据的流行度,使用口令认证密钥交换协议与同态加密安全传递数据的加密密钥,在保证用户数据隐私的前提下进行安全的重复数据删除. 与现有其它方案相比,安全性与实用性更强. 实验和仿真证明了方案的高效性.     

Bioelectrochemical sulfate reduction enhanced nitrogen removal from industrial wastewater containing ammonia and sulfate

Low organic carbon-to-nitrogen ratio and existing sulfate (SO₄²⁻) in industrial wastewater limited nitrogen removal. Coupling SO₄²⁻ reduction with sulfide autotrophic denitrification provides a novel strategy. Herein, bioelectrochemical sulfate reduction was coupled with heterotrophic sulfate reduction to drive sulfide autotrophic denitrification. In this coupled system, total nitrogen (TN) removal efficiency was increased from ~25% to ~85% by inputting −45 mA electricity. With the help of supplying electrons to denitrification through SO₄²⁻ reduction, coulomb efficiency was improved to 61.5%. Also, bioelectrochemical sulfate reduction could improve sulfur recovery and thus increase TN removal efficiency. Furthermore, through tuning turnover numbers of SO₄²⁻, high TN removal efficiency can be obtained at various concentrations of SO₄²⁻. Moreover, main functional bacteria in this system were identified. Finally, ~75% TN removal efficiency was achieved with real wastewater in this system. Overall, this work offered a new approach for efficient nitrogen removal from industrial wastewater containing SO₄²⁻.     

Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

高强度复合材料整铸辙叉前期研究

辙叉是线路上工作条件最为严峻的轨道部件之一。用高强度复合材料整铸的辙叉替代普通辙叉的研究具有重要意义。以ＰＤ３钢轨钢作为基体材料，在其表面熔合上一层新型具有更好耐磨性能的材质。新材料１、新材料２分别在ＰＤ３基础上把Ｖ的含量提高到０．１５％～０．２５％和０．３５％～０．４５％。采用合适的工艺措施，使新材料１、２与ＰＤ３轨道钢很好地熔合在一起。它们的σｂ、ａｋ、δ、τｂ均不低于ＰＤ３，而Ｈｖ却有了提高。     

陶瓷结合剂化学组成的计算与配方优化设计

本文利用计算机技术．对陶瓷结合剂化学成分进行精密计算．在此基础上，根据结合剂所需要的化学成分，采用数学模型精确优化设计出陶瓷结合剂配方(即各种原材料的配比)，文章介绍了上述算法具体实现方法，给出了算法模型和精确的程序语言描述，算法重点解决了误差放大．计算稳定性等工程计算问题，对实际系统运行样本数据进行了验证，同时，文章描述了算法所引用的数据库表的结构设计方法及提高数据库应用效率和灵活性的技巧；分析了整个软件系统模块组成，描述了系统功能。通过实际应用与测试．验证了该系统算法和软件系统的可用性，对研究开发新型陶瓷结合剂具有重要指导作用。     

Thermal analysis of laser surface transformation hardening—optimization of process parameters

This paper deals with the optimization of process parameters for maximum productivity (given by the product of scanning velocity and cross feed) in laser transformation hardening. The process parameters considered are laser beam power, P; laser beam diameter, D_b; and the heat intensity distribution, namely, normal, bimodal, or uniform. A thermal analysis of the laser surface transformation hardening of gears was conducted (based on Jaeger’s classical moving heat source method) by considering the laser beam as a moving plane (disc) heat source to establish the temperature rise distribution in the workpiece (gear) of finite width. In a recent investigation [Int. J. Heat Mass Transfer 44 (2001) 2845], the authors considered the case of a heat source with a pseudo-Gaussian (or normal) distribution of heat intensity. The analytical results were compared with the experimental results published in the literature. In laser heat treatment of steel, it is generally considered preferable to use a wider heat intensity distribution, such as uniform or bimodal, for it enables more uniform case hardening depth. In this paper, this model is extended to cover bimodal and uniform distributions and compared with the normal distribution. Scanning velocities for no surface melting and for a case hardening depth of 0.1 mm were determined for surface transformation hardening of AISI 1036 (EN 8) steel for a range of laser beam powers, P, laser beam diameters, D_b, and various heat intensity distributions. Since diffusion during the heat treatment (surface transformation hardening) process is a time dependent phenomenon, based on the literature review, an interaction time of 15 ms was taken as a basis. It is hoped that laser industry with adequate facilities available can validate the thermal analysis and subsequent optimization presented in this paper.     

钻杆环缝数控自动焊机

研制的钻杆环缝数控自动机焊为全自动的数控焊机。用于钻杆与两端法兰的内外共4条环缝的焊接。工件的上料、定位、夹紧、内外焊枪的到位、内外焊枪的焊接、自动排列焊道各层各道的焊接工艺参数的改变等均能自动进行。不同管径和不同壁厚采用的各种焊接参数都可在人机界面上预置。采用富氩混合气体保护焊工艺方法，焊缝美观，性能优良，几乎没有飞溅。经大量的生产实践证明该钻杆环缝数控自动焊机焊接质量好，生产效率高。     

Pt/onion-like fullerenes as catalyst for direct methanol fuel cell

Onion-like fullerenes synthesized by arc discharge in water were used as support of Pt nanoparticles as electrocatalytic materials for direct methanol fuel cell. Uniform platinum nanoparticles with the average diameter of about 4.3 nm were well dispersed on the surface of onion-like fullerenes by impregnation-reduction method. The morphologies and microstructures of the as-prepared composites were studied by means of XRD and TEM. Electrochemical analysis shows that this kind of nano material may be an excellent candidate to be used as the support of catalyst for methanol electrochemical oxidation.     

多向锻造7075铝合金的结构和性能

在440℃经多向锻造加工成7075铝合金锻件。研究了锻件的显微组织和力学性能随退火温度和T73回火的变化，TEM和SEM用于分析锻件的晶粒和第二相形态。多向和大变形锻造产生平均晶粒尺寸1．8μm的完全再结晶组织。390℃-450℃退火使晶粒长大到3μm，但位错和第二相分布没有明显改变，这时锻件展现出较低强度和较高延性。T73回火使锻件屈服强度和拉伸强度分别提高280％和210％，而延性同退火样相比并无明显下降，断裂韧性达到51MPam^1/2，可以认为这是沉淀强化的贡献。     

渗硼层脆性判据K的物理本质

从实验和理论上对显微硬度压痕结合声发射测量渗硼层脆性的合理性及其脆性判据Ｋ的物理意义进行了讨论。Ｋ值可以反映渗硼层显微压痕裂纹长度随负荷增加的变化率，因而可以表征渗硼层的脆性。根据断裂力学可以导出入与Ｇ＿（ＩＣ）之间存在如下关系：Ｋ＝β（Ｇ＿Ｉ－Ｇ＿（ＩＣ））。Ｋ值间接反映了渗硼层的断裂韧性，可以作为定量评价渗硼层本质脆性的力学参量。