Microstructure and Electrical Properties of Low Temperature Processed Ohmic Contacts to p‐Type GaN

With Ni/Au and Pd/Au metal schemes and low temperature processing, we formed low resistance stable Ohmic contacts to p‐type GaN. Our investigation was preceded by conventional cleaning, followed by treatment in boiling HNO₃:HCl (1:3). Metallization was by thermally evaporating 30 nm Ni/15 nm Au or 25 nm Pd/15 nm Au. After heat treatment in O₂ + N₂ at various temperatures, the contacts were subsequently cooled in liquid nitrogen. Cryogenic cooling following heat treatment at 600 ·C decreased the specific contact resistance from 9.84·10^?4 Ωcm² to 2.65·10^?4 Ωcm² for the Ni/Au contacts, while this increased it from 1.80·10^?4 Ωcm² to 3.34·10^?4 Ωcm² for the Pd/Au contacts. The Ni/Au contacts showed slightly higher specific contact resistance than the Pd/Au contacts, although they were more stable than the Pd contacts. X‐ray photoelectron spectroscopy depth profiling showed the Ni contacts to be NiO followed by Au at the interface for the Ni/Au contacts, whereas the Pd/Au contacts exhibited a Pd:Au solid solution. The contacts quenched in liquid nitrogen following sintering were much more uniform under atomic force microscopy examination and gave a 3 times lower contact resistance with the Ni/Au design. Current‐voltage‐temperature analysis revealed that conduction was predominantly by thermionic field emission.     

Improved device performances in polymer light-emitting diodes using a stamp transfer printing process

The device performances of spin-coated and stamp transfer printed devices were compared. There was little difference of morphology between the spin-coated and stamp transfer printed devices. However, the stamp transfer printing process was better than the spin-coating process in terms of current density, light-emitting efficiency and lifetime. In particular, the lifetime of the stamp transfer printed device was doubled compared with that of the spin-coated device.     

Microstructure and electrical properties of high power laser thermal annealing on inkjet-printed Ag films

In this work, a high power continuous-wave (CW) Nd:YAG laser was used for thermal treatment of inkjet-printed Ag films - resulting in the elimination of organic additives (dispersant, binder, and organic solvent) in the Ag ink and annealing of Ag nano-particles. By optimizing laser parameters such as laser power and defocusing value, the laser energy can be totally converted into heat energy, which is used for thermal treatment of inkjet-printed Ag films. This results in the microstructure and the resistivity of the films to be controlled. We investigated the thermal diffusion mechanisms during laser annealing and the resulting microstructures. The impact of high power laser annealing on microstructures and electrical characteristics of inkjet-printed Ag films was compared to those of the films annealed by a conventional furnace annealing. Focused ion beam (FIB) channeling images show that the laser annealed Ag films have large columnar grains and a dense void-free structure, while furnace annealed films have much smaller grains and exhibit void formation. As a result, the laser annealed films have better electrical properties (low resistivity) compared to furnace annealed samples.     

Fiber-optic sensor array based on Sagnac interferometer with stablephase bias

We propose and experimentally demonstrate a novel fiber sensor array based on a Sagnac interferometer with very simple electronic signal processing. A stable quadrature phase bias was obtained using a phase modulator, and the polarization-induced signal fading was suppressed by using a depolarizer and a broad-band source. A phase sensitivity of about 4.0 μrad_rms/√Hz at 5 kHz was obtained using a two-sensor array     

Relationship between HOMO energy level and open circuit voltage of polymer solar cells

A series of π-conjugated polymers (PDHF-BT and PDHF-TBT) with 4-(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (BT), 4,7-bis(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (TBT), and 9,9′-dihexylfluorene were synthesized by the Suzuki coupling reaction. The HOMO energy level of PDHF-BT was −5.47 eV, which was lower than that of PDHF-TBT (−5.22 eV), while the LUMO energy level of PDHF-BT (−3.45 eV) was very similar to that of PDHF-TBT (−3.42 eV). These energy levels of PDHF-BT and PDHF-TBT were also supported by a DFT calculation. The power conversion efficiency (PCE) of the polymer solar cell (PSC) with a structure of ITO/PEDOT:PSS/PDHF-BT:PCBM (1:1)/Al was determined as 0.34% and it was larger than that of the device based on PDHF-TBT (0.22%). Correspondingly, the V_oc of the PSC based on PDHF-BT (0.71 V) was much larger than that of the device based on PDHF-TBT (0.40 V). The results support that the V_oc of polymer based PSCs is strongly related to the HOMO energy level of the active polymers.     

Odor discrimination using neural decoding of the main olfactory bulb in rats

This paper presents a novel method for inferring the odor based on neural activities observed from rats' main olfactory bulbs. Multichannel extracellular single unit recordings were done by microwire electrodes (tungsten, 50 μm, 32 channels) implanted in the mitral/tufted cell layers of the main olfactory bulb of anesthetized rats to obtain neural responses to various odors. Neural response as a key feature was measured by subtraction of neural firing rate before stimulus from after. For odor inference, we have developed a decoding method based on the maximum likelihood estimation. The results have shown that the average decoding accuracy is about 100.0%, 96.0%, 84.0%, and 100.0% with four rats, respectively.     

ε‐Branched Flexible Side Chain Substituted Diketopyrrolopyrrole‐Containing Polymers Designed for High Hole and Electron Mobilities

Based on the integrated consideration and engineering of both conjugated backbones and flexible side chains, solution‐processable polymeric semiconductors consisting of a diketopyrrolopyrrole (DPP) backbone and a finely modulated branching side chain (ε‐branched chain) are reported. The subtle change in the branching point from the backbone alters the π?π stacking and the lamellar distances between polymer backbones, which has a significant influence on the charge‐transport properties and in turn the performances of field‐effect transistors (FETs). In addition to their excellent electron mobilities (up to 2.25 cm² V^?1 s^?1), ultra‐high hole mobilities (up to 12.25 cm² V^?1 s^?1) with an on/off ratio (I_on/I_off) of at least 10⁶ are achieved in the FETs fabricated using the polymers. The developed polymers exhibit extraordinarily high electrical performance with both hole and electron mobilities superior to that of unipolar amorphous silicon.     

Miniaturized Flexible Electronic Systems with Wireless Power and Near‐Field Communication Capabilities

A class of thin, lightweight, flexible, near‐field communication (NFC) devices with ultraminiaturized format is introduced, and systematic investigations of the mechanics, radio frequency characteristics, and materials aspects associated with their optimized construction are presented. These systems allow advantages in mechanical strength, placement versatility, and minimized interfacial stresses compared to other NFC technologies and wearable electronics. Detailed experimental studies and theoretical modeling of the mechanical and electromagnetic properties of these systems establish understanding of the key design considerations. These concepts can apply to many other types of wireless communication systems including biosensors and electronic implants.     

20% External Quantum Efficiency in Solution‐Processed Blue Thermally Activated Delayed Fluorescent Devices

Highly efficient solution‐processed blue thermally activated delayed fluorescent (TADF) devices are developed by designing soluble blue TADF emitters. The solubility and emission color could be managed by introducing F as an electron withdrawing unit instead of CN. Two soluble blue TADF emitters are synthesized and show a high external quantum efficiency of 20.0% with a color coordinate of (0.16,0.26), and it is the best quantum efficiency reported in solution‐processed TADF devices. The device performances of the solution‐processed blue TADF devices are comparable to those of vacuum‐processed blue TADF devices.     

Optimal resource allocation for energy efficiency in coordinated multicell OFDMA networks

Because energy efficiency (EE) is inevitable in future wireless cellular networks, in this paper, we focus on improving the number of bits delivered to users for each unit energy consumption in the downlink of orthogonal frequency‐division multiple access cellular networks with base stations (BSs) coordination. Specifically, each BS shares the channel qualities of users with others and jointly choose the set of co‐channel users and the transmit power allocated to maximize the EE of the system subject to the transmit power ceiling of each BS and minimum required data rate. We formulate the problem as a nonlinear fractional optimization problem, using nonlinear fractional programming, the original hard‐to‐solve problem is transferred to a new one that has the same optimal solution and is easier to solve, this enables two iterative algorithms that achieve nearly the same maximum EE. Numerical results are provided to show the convergence and superiority of the two proposed. Copyright © 2014 John Wiley & Sons, Ltd.