Thermal Resistance Measurement of LED Package with Multichips

Thermal transient measurements of high power GaN-based light-emitting diodes (LEDs) with multichip designs are presented and discussed in the paper. Once transient cooling curve was obtained, the structure function theory was applied to determine the thermal resistance of packages. The total thermal resistance from junction to ambient considering optical power is 19.87 K/W, 10.78 K/W, 6.77 K/W for the one-chip, two-chip and four-chip packages, respectively. The contribution of each component to the total thermal resistance of the package can be determined from the cumulative structure function and differential structure function. The total thermal resistance of multichip packages is found to decrease with the number of chips due to parallel heat dissipation. However, the effect of the number of chips on thermal resistance of package strongly depends on the ratio of partial thermal resistance of chip and that of slug. Therefore, an important thermal design rule for packaging of high power multichip LEDs has been analogized.     

Fast Super‐Resolution Algorithm Based on Dictionary Size Reduction Using k‐Means Clustering

This paper proposes a computationally efficient learning‐based super‐resolution algorithm using k‐means clustering. Conventional learning‐based super‐resolution requires a huge dictionary for reliable performance, which brings about a tremendous memory cost as well as a burdensome matching computation. In order to overcome this problem, the proposed algorithm significantly reduces the size of the trained dictionary by properly clustering similar patches at the learning phase. Experimental results show that the proposed algorithm provides superior visual quality to the conventional algorithms, while needing much less computational complexity.     

Temperature influence on performance degradation of hydrogenated amorphous silicon solar cells irradiated with protons

This paper reports temperature influence on radiation degradation of hydrogenated amorphous silicon (a‐Si : H) solar cells. Degradation behaviors of a‐Si : H solar cells irradiated with protons at 331 K are compared with that at 298 K (room temperature). Variations with time in the post‐irradiation electrical properties are also investigated. It is found that the radiation degradation of the electrical properties at 331 K is significantly smaller than that at room temperature. Also, all the electrical properties (short‐circuit current, open‐circuit voltage, output maximum, and fill factor) recover with time after irradiation even at room temperature. The characteristic time of thermal annealing of short‐circuit current is larger as the temperature is higher. These results indicate that temperature during irradiation and elapsed time from irradiation to measurement is an important parameter for radiation degradation of a‐Si : H solar cells. Therefore, these parameters should be controlled in conducting the ground radiation tests. Copyright © 2012 John Wiley & Sons, Ltd.     

Integrated optical waveguide polarizer based on photobleaching-induced birefringence in an electrooptic polymer

A TE-pass waveguide polarizer is fabricated by utilizing the photobleaching-induced birefringence at room temperature in an electrooptic polymer. The polarizer consists of the photobleached waveguide supporting only TE mode, which is integrated in the middle of the etched rib waveguide supporting both TE and TM modes. It has a simple structure and requires no high temperature process like poling. The measured polarization extinction ratio is about 21 dB at the wavelengths of 1.3 and 1.55 /spl mu/m, and the estimated excess loss is about 0.4 dB.     

Optical packet switching in core networks: between vision andreality

The research on optical packet switching (OPS) has witnessed considerable progress in the 1990s. We examine the future potential of OPS in the core network by discussing this switching approach and the current status of a number of its enabling technologies. Many of these technologies are still in the stage of research and experimentation. We see that optical packet switching may be deployed in the long-term future subject to satisfaction of three main conditions/developments. First, additional technological developments have to take place to overcome remaining implementation challenges while making OPS cost-effective to deploy. Second, a rational migration scenario of the network toward gradual deployment of packet-based optical switching approaches should exist. Finally, carriers have to become more interested in packet-based optical switching solutions     

10 Gbit/s transmission over 50 km nonzero dispersion-shifted fibreusing 1.3 μm directly modulated uncooled transmitters

A 1.3 μm uncooled transmitter with wide-open eye diagrams at laser temperatures of 20, 50, and 85°C is presented. Using this transmitter, it is demonstrated that 10 Gbit/s transmission is possible over a 50 km nonzero dispersion-shifted Lucent TrueWave-RS fibre. This result is compared with transmission over a 55 km standard singlemode fibre     

Non-functionalized soluble diketopyrrolopyrrole: Simplest p-channel core for organic field-effect transistors

We report the synthesis, characterization and behavior in field-effect transistors of non-functionalized soluble diketopyrrolopyrrole (DPP) core with only a solubilizing alkyl chain (i.e. –C₁₆H₃₃ or –C₁₈H₃₇) as the simplest p-channel semiconductor. The characteristics were evaluated by UV–vis and fluorescence spectroscopy, X-ray diffraction, cyclic voltammetry (CV), thermal analysis, atomic force microscopy (AFM) and density functional theory (DFT) calculation. For top-contact field-effect transistors, two types of active layers were prepared either by a solution process (as a 1D-microwire) or thermal vacuum deposition (as a thin-film) on a cross-linked poly(4-vinylphenol) gate dielectric. All the devices showed typical p-channel behavior with dominant hole transports. The device made with 1D-microwiress of DPP-R18 showed field-effect mobility in the saturation region of 1.42 × 10^?2 cm²/V s with I_ON/I_OFF of 1.82 × 10³. These findings suggest that the non-functionalized soluble DPP core itself without any further functionalization could also be used as a p-channel semiconductor for low-cost organic electronic devices.     

Ultra-low temperature sensitive deep-well quantum cascade lasers (λ - 4.8 μm) via uptapering conduction band edge of injector region

A new design feature for deep-well quantum cascade (QC) lasers, in which the conduction band edge of the injector region is uptapered, results in virtual suppression of carrier leakage out of the active regions of 4.8 mm emitting devices. For heatsink temperatures in the 20?90°C range the characteristic temperature coefficients for threshold, T₀, and slope efficiency, T₁, reach values as high as 278 and 285 K, respectively, which are nearly twice the values for conventional QC lasers. At 20°C, the threshold current density for uncoated, 30 period, 3 mm-long devices is only ~1.8 kA/cm².