Analysis of Plasma Reaction for Decomposition of CHF3 in a Dielectric Barrier Discharge

The decomposition of CHF₃ in a mixture with O₂ and Ar was investigated in a coaxial dielectric barrier discharge at atmospheric pressure. CHF₃ decomposition increased linearly in regard to specific energy input (SEI), whereas energy efficiency decreased. The main product was CO_2, and its selectivity increased with high SEI and the presence of O₂ in the feed, but an increase of O₂ in the feed led to a decrease in decomposition rate. An increase in total flow rate led to an increase of the absolute amount of CHF₃ decomposition and energy efficiency; however, the decomposition of CHF₃ decreased. A complete CHF₃ decomposition occurred under an SEI of 1.54 kJ/L with the selectivity of CO₂ and CO as 89.87% and 7.00%, respectively. Optical emission spectroscopic analysis could explain the available reaction pathways for CHF₃ decomposition in the CHF₃/O₂/Ar atmospheric plasma and show the possibility of F₂ and HF formation.     

Layered Nanoprobe for Long‐Lasting Fluorescent Cell Label

A long‐lasting particle‐based fluorescent label is designed for extended cell imaging studies. This onion‐like nanoprobe is constructed through layer‐by‐layer fabrication technology. The nanoprobes are assembled with multiple layers of optically quenched polyelectrolytes, the fluorescence signal of which can be released later by intracellular proteolysis. Upon incubation with cells, the assembled nanoprobes are taken up efficiently. The tight packing and layered assembly of the quenched polyelectrolytes slow subsequent intracellular degradation, and then result in a prolonged intracellular fluorescence signal for up to 3 weeks with no noticeable toxicity.     

Investigation of isochronous stress-strain formulations for elevated temperature structural design

For elevated temperature design evaluations by the ASME-NH rules, the most important material data is the isochronous stress-strain curves, which can provide design creep information. The main purpose of this paper is to investigate appropriate formulations to be able to generate the isochronous stress-strain curves and implement it to the computer program which is coded the ASME-NH design evaluation procedures. To do this, formulations by the strain-time relationship are investigated in detail and the sensitivity studies for rapid initial transient creep contributions, slower and longer transient creep contribution, and secondary creep contributions are carried out for type 316 austenitic stainless steel. From the results of this study, it is found that the strain-time relationship formulations can well describe the isochronous stress-strain curves with the transient creep contributions.     

In situ injection of THF to trigger gas hydrate crystallization: Application to the evaluation of a kinetic hydrate promoter

This paper investigates an original method to efficiently trigger gas hydrate crystallization. This method consists of an in situ injection of a small amount of THF into an aqueous phase in contact with a gas-hydrate-former phase at pressure and temperature conditions inside the hydrate metastable zone. In the presence of a CO₂–CH₄ gas mixture, our results show that the THF injection induces immediate crystallization of a first hydrate containing THF. This triggers the formation of the CO₂–CH₄ binary hydrate as proven by the pressure and temperature reached at equilibrium. This experimental method, which “cancels out” the stochasticity of the hydrate crystallization, was used to evaluate the effect of the anionic surfactant SDS at different concentrations, on the formation kinetics of the CO₂–CH₄ hydrate. The results are discussed and compared with those published in a recent article (Ricaurte et al., 2013), where THF was not injected but present in the aqueous phase from the beginning and at much higher concentrations.     

A continuous screening procedure using the performance and surrogate variables

A continuous screening procedure interchangeably using the performance and surrogate variables is proposed. At the start of the inspection, the performance variable is measured for all items. As soon as i consecutive items are found to be free of defects, the surrogate variable is measured instead of the performance variable. If an item is rejected, the inspection based on the performance variable is resumed. All non-conforming items found in the inspection are either reworked or replaced with conforming items. The average outgoing quality (AOQ) expression is derived, and methods of finding the inspection procedure with a specified average outgoing quality limit (AOQL) are presented.     

Inverse material identification in coupled acoustic-structure interaction using a modified error in constitutive equation functional

This work focuses on the identification of heterogeneous linear elastic moduli in the context of frequency-domain, coupled acoustic-structure interaction (ASI), using either solid displacement or fluid pressure measurement data. The approach postulates the inverse problem as an optimization problem where the solution is obtained by minimizing a modified error in constitutive equation (MECE) functional. The latter measures the discrepancy in the constitutive equations that connect kinematically admissible strains and dynamically admissible stresses, while incorporating the measurement data as additional quadratic error terms. We demonstrate two strategies for selecting the MECE weighting coefficient to produce regularized solutions to the ill-posed identification problem: 1) the discrepancy principle of Morozov, and 2) an error-balance approach that selects the weight parameter as the minimizer of another functional involving the ECE and the data misfit. Numerical results demonstrate that the proposed methodology can successfully recover elastic parameters in 2D and 3D ASI systems from response measurements taken in either the solid or fluid subdomains. Furthermore, both regularization strategies are shown to produce accurate reconstructions when the measurement data is polluted with noise. The discrepancy principle is shown to produce nearly optimal solutions, while the error-balance approach, although not optimal, remains effective and does not need a priori information on the noise level.     

Thermal treatment effect on the magnetoelectric properties of (Ni0.5Zn0.5)Fe2O4/Pt/Pb(Zr0.3Ti0.7)O3 heterostructured thin films

Magnetoelectric (ME) property modulation in heterostructured (Ni_0.5Zn_0.5)Fe₂O₄/Pt/Pb(Zr_0.3Ti_0.7)O₃ (NZFO/Pt/PZT) thin films on platinized Si substrate by thermal annealing condition variation was studied. In an attempt to prevent interfacial reaction between NZFO and PZT layers during high temperature annealing, thin Pt layer was deposited which can serve as inter-diffusion barrier as well as electrode. The ferroelectric, magnetic, and ME properties of the heterostructured film were noticeably modulated due to microstructural evolution and clamping relaxation developed during thermal annealing process. Room temperature ME voltage coefficient of the heterostructured thin films was enhanced with increasing annealing temperature and reached to 29 mV/cm·Oe when annealed at 650 °C.