Improving the dyeing properties of textiles via utilization of redox systems. I. Dyeing of wool and wool/polyacrylic blend fabrics with acid dye

Dyeing of wool and wool/polyacrylic fabrics with an acid dye, namely, Kiton Scarlet 4 R, was carried out in absence or presence of different redox systems. The latter were based on sodium, potassium, or ammonium peroxodisulphate or potassium periodate as oxidant and glucose, sodium thiosulphate, potassium pyrosulphite or thiourea as reductant. Regardless of the redox system used, the colour strength was far greater in presence than in absence of the redox system. Except in case of potassium periodate/glucose redox system, increasing the oxidant concentration up to 0.03 mol/l caused significant enhancement in colour strength. The same was observed upon increasing the temperature from 30 to 60°C as well as the time from 10 to 40 minutes. It is postulated that presence of the redox system alters the mode of dye attachment to the substrate. Association of the dye with the substrate, wool in particular, seems to involve covalent bonding beside the usual salt-linkage. Hence the approach presented is advantageous in producing dyeings with much higher colour strength and dye fixation at relatively low temperature.     

Improving the dyeing properties of textiles via utilization of redox systems. II. Dyeing of nylon-6 with acid dye

Redox systems based on potassium, sodium or ammonium peroxodisulphate or potassium periodate as oxidant and glucose, thiourea, sodium thiosulphate or potassium pyrosulphite as reductant were incorporated in the dyeing bath of nylon-6 under a variety of conditions. An acid dye, namely Kiton Scarlet 4 R was used. The colour strength and dye fixation enhanced outstandingly in presence of the redox system, depending upon kind and concentration of the redox components. Raising the dyeing temperature from 30 to 60°C caused significant improvement in colour strength. The same holds true for duration of dyeing up to 60 min. Beside association of the dye with nylon-6 by salt-like bond, a free radical mechanism was suggested.     

Attitudes towards mobile banking: are there any differences between users and non-users?

Extant research has focused on monitoring the behaviour of people who use mobile banking (MB) but it has paid little attention to understanding the impact of information technology usage behaviour due to cultural differences. Humans are the weakest link in information technology adoption; past research has shown that not all users are predisposed to change their behaviour radically and adopt new channels of banking. This paper examines the demographic patterns of users and non-users of MB. The paper also investigates the attitudinal influences of users and non-users of MB based on innovation attributes. Using empirical research, the study identifies constructs of innovation attributes that were perceived to be significantly different among the users and non-users of MB. The study provides valuable insights into MB in Saudi Arabia that have not been previously investigated. From a practical point, findings of this study will be particularly useful to banks, financial institutions and telecommunication service providers.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Tomato Seed Oil II Evaluation of the Egyptian Tomato Seed Oil and the Residual Meal

The oil extracted from tomato seeds and the resultant cake were evaluated. The whole seeds were analyzed for the gross composition. The oil extracted with hexane was examined for its physical and chemical properties. The residual meal was evaluated for the gross, minerals and amino acids. The obtained results were compared with those of cotton seeds.     

Consistency of randomized and finite sized decision tree ensembles

Regression via classification (RvC) is a method in which a regression problem is converted into a classification problem. A discretization process is used to covert continuous target value to classes. The discretized data can be used with classifiers as a classification problem. In this paper, we use a discretization method, Extreme Randomized Discretization, in which bin boundaries are created randomly to create ensembles. We present an ensemble method for RvC problems. We show theoretically for a set of problems that if the number of bins is three, the proposed ensembles for RvC perform better than RvC with the equal-width discretization method. We use these results to show that infinite-sized ensembles, consisting of finite-sized decision trees, created by a pure randomized method (split points are created randomly), are not consistent. We also theoretically show, using a set of regression problems, that the performance of these ensembles is dependent on the size of member decision trees.     

Preparation and characterization of carboxylic cation exchange resins from the reaction of poly(vinyl alcohol) with melamine-formaldehyde and some hydroxy acids

The synthesis of cation exchange resins via the reaction of poly(vinyl alcohol) as a carrier, citric acid as a catalyst and reactive additive to produce resin structures with grafted carboxy groups, along with a melamine-formaldehyde precondensate, responsible for crosslinking-reinforcing and insolubilizing the resin structure as well as for fixing and binding the acidic functional groups onto the resin structure, has been investigated using varied molar ratios of reactants and varied time as well as temperature. Reaction conditions were selected to prepare a cation exchange resin based on citric acid. Two other cation exchange resins based on tartaric acid and glycolic acid, were also prepared under the same selected reaction conditions. These three resins were characterized by potentiometric titration, water solubility and swellability, as well as durability to use.     

Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Dependence of soiling and soil release of easy care cotton on factors-controlling the finishing treatment

The conventional pad-dry-cure method was used for effecting crosslinking of cotton with N-methylol finishing agents under different conditions. Factors studied include nature and concentration of finishing agent and softener, type and concentration of catalyst, and curing temperatures. Variation of soiling and soil release characteristics of crosslinked cotton with these factors were investigated. The effect of finishing agent on aqueous soiling followed the order: Carbamate reactant-fabric > Dimethylolethylene urea-fabric > Dimethyloldihydroxyethylene urea-fabric > Untreated fabric > Modified triazinone-fabric ≥ Modified ethylene urea-fabric. On the other hand, the effect of these finishing agents was to enhance the susceptibility of the fabric to oily soiling. Nevertheless, nature of the finishing agent governed the magnitude of this enhancement. Aqueous and oily soil release depended also upon the nature of finishing agent, soiling increased and soil release decreased by increasing finishing agent concentration. Type of catalyst exerted a considerable influence on aqueous and oily soil release without significantly affecting the degree of soiling. For aqueous soil release, the following order was found: Al₂(SO₄)₃ · 18H₂O > MgCl₂ · 6H₂O > urea nitrate > ZnCl₂ · 6H₂O > Zn(NO₃)₂ · 6H₂O > urea phosphate > urea oxalate > NH₄ · H₂PO₄ ≥ NH₄Cl. A reverse order held good for oily soil release. Both aqueous and oily soil release were impaired by increasing catalyst concentration. Similarly, nature and concentration of the softener had no striking effect on soiling while they did on soil release. Raising the curing temperature from 80 to 140°C caused substantial reduction in case of soil removal of urea salts catalyzed-crosslinked cotton samples while having the degree of soiling practically intact.