Multi-directional blending for heterogeneous objects

This paper presents a novel multi-directional blending method for heterogeneous object design. Contrary to earlier studies, this paper introduces material blending through multiple features with different heterogeneous material composition. Feature-based method is used to represent and design heterogeneous objects with multi-directional material composition. The Voronoi diagram of multiple curves is constructed to generate bisector of the geometric domain. Then, metamorphosis from the bounding curve to multiple internal curves is performed using dynamic programming based optimization approach in two steps. First, optimum curve matching between internal curves and enclosing Voronoi cells is obtained. Then, an optimum ruling line alignment and insertion technique between the Voronoi diagram and the bounding curve is developed. Metamorphosis through complex concavities is also achieved. Finally, multi-directional material composition is mapped based on a set of relations.     

Wavelet approximation-based affine invariant shape representation functions

In this paper, new wavelet-based affine invariant functions for shape representation are presented. Unlike the previous representation functions, only the approximation coefficients are used to obtain the proposed functions. One of the derived functions is computed by applying a single wavelet transform; the other function is calculated by applying two different wavelet transforms with two different wavelet families. One drawback of the previously derived detail-based invariant representation functions is that they are sensitive to noise at the finer scale levels, which limits the number of scale levels that can be used. The experimental results in this paper demonstrate that the proposed functions are more stable and less sensitive to noise than the detail-based functions.     

Continuous Airborne Communication Relay Approach Using Unmanned Aerial Vehicles

As a result of unmanned aerial vehicles being widely used in different areas, studies about increasing the autonomous capabilities of unmanned aerial vehicles are gaining momentum. Today, unmanned aerial vehicle platforms are especially used in reconnaissance, surveillance and communications areas. In this study, in order to achieve continuous long-range communication relay infrastructure, artificial potential field based path planning of Unmanned Aerial Vehicles is discussed. A novel dynamic approach to relay-chain concept is proposed to maintain the communication between vehicles. Besides dynamically keeping vehicles in range and appropriate position to maintain communication relay, artificial potential field based path planning also provides collision avoidance system. The performance of the proposed system is measured by applying a simulation under the Matlab Simulink and Network Simulator environment. Artificial potential field based flight patterns are generated in Matlab, and performance of the communication between vehicles is measured in Network Simulation environment. Finally the simulation results show that an airborne communication relay can be established autonomously by using artificial potential filed based autonomous path planning approach. Continues state communication is provided by obtaining a resistant communication relay which depends on artificial potential field based positioning algorithm.     

An encoding scheme based on fractional number for querying and updating XML data

In order to facilitate the XML query processing, several labeling schemes have been proposed to directly determine the structural relationships between two arbitrary XML nodes without accessing the original XML documents. However, the existing XML labeling schemes have to re-label the pre-existing nodes or re-calculate the label values when a new node is inserted into the XML document during an update process. In this paper, we devise a novel encoding scheme based on the fractional number to encode the labels of the XML nodes. Moreover, we propose a mapping method to convert our proposed fractional number based encoding scheme to bit string based encoding scheme with the intention to minimize the label size and save the storage space. By applying our proposed bit string encoding scheme to the range-based labeling scheme and the prefix labeling scheme, the process of re-labeling the pre-existing nodes can be avoided when nodes are inserted as leaf nodes and sibling nodes without affecting the order of XML nodes. In addition, we propose an algorithm to control the increment of label size when new nodes are inserted frequently at a fix place of an XML tree. Experimental results show that our proposed bit string encoding scheme provides efficient support to the process of XML updating without sacrificing the query performance when it is applied to the range-based labeling schemes.     

Implementation of genetic algorithm in an embedded microcontroller-based polarization control system

Implementation of genetic algorithm in a PIC32MX microcontroller-based polarization control system is proposed and demonstrated. The controller measures the signal intensity that is used to estimate the genetic value. This process is controlled by the genetic algorithm rather than referring to the Look-Up-Table as implemented in existing solutions. To reach optimum performance, the code is optimized by using the best genetic parameters so that the fastest execution time can be achieved. An ability of genetic algorithm to work efficiently in polarization control system possesses many advantages including easy code construction, low memory consumption and fast control speed. Genetic algorithm is intelligent enough to be used for endless polarization stabilization and in the worst case, able to stabilize the polarization changes in 300 μs. In the best case the response time can reach 17 μs.     

Shear Strength of Pre-Cast Prestressed Composite Beams with Discontinuous Connections Made of Cast-in-Place Shear Keys

This work investigates the horizontal and web shear resistance of continuous and discontinuous slab-web connections in pre-cast pre-tensioned bridge systems. The beams were full scale pre-cast pre-tensioned girders and the slabs were made of ordinary reinforced concrete either cast in place, for continuous connections, or pre-cast slabs with holes spaced at 312.5 mm to be set in place, for discontinuous connections. The main variables were the connection type (continuous or discontinuous) and the ratio of the connection steel. From the test results and the numerical analysis performed, a modified stress field for the inclined compressive strut in the truss model is proposed for continuous and discontinuous slab-web connections. The analytical results obtained with the proposed modified stress field in the truss model compared well with the tests results. Design procedures for these types of elements are also discussed.     

ZnO/Si solar cell fabricated by spray pyrolysis technique

The ZnO/Si heterojunctions have been prepared by depositing n-ZnO films doped with aluminium on p-Si by spray pyrolysis method. Heterojunction solar cells were fabricated using the configuration Al/ZnO/Si/In. The electrical properties of the heterojunction are investigated by means of current–voltage measurements in the temperature range 295–375 K. The cells show the rectifying behaviour characterized by the current–voltage (I–V) measurement under a dark condition, while photoelectric effects have been exhibited under the illumination. As a result, the conversion efficiency of the fabricated cell of about 6.6% was obtained.     

Effect of wafer thinning methods towards fracture strength and topography of silicon die

This paper characterizes die damage resulting from various wafer thinning processes. Die fracture strength is measured using ball breaker test with respect to die surface finish. Further study on surface roughness and topography of each surface finish is obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques. Stress relief process with 25 μm removal is able to strengthen 100 μm wafer by 20.4% using chemical wet etch and 75 μm wafer by 36.4% with plasma etch. Relatively, plasma etching shows higher fracture strength and flexibility compared to chemical wet etch. This is due to topography of the finished surface of plasma etch is smoother and rounded, leading to a reduced stress concentration, hence improved fracture strength.     

Optimization of composite plates with piezoelectric stiffener-actuators under in-plane compressive loads

Stiffeners which are used to strengthen a plate can be constructed of piezoceramic materials and subsequently used as piezo actuators to improve the load carrying capacity of the plate. In the present study, a fibre composite plate with initial imperfections and under in-plane compressive loads is studied with a view towards minimizing its deflection using the piezo actuators and the fibre orientations. Piezoceramic stiffeners are bonded symmetrically on the top and bottom of the plate and deployed as actuators. Two cases of electric fields, namely, the in-phase and out-of-phase voltages are applied to the actuators. The presence of initial deflections leads to deformation under the in-plane compressive loads which should be less than the critical buckling load. Two cases of initial imperfections are considered, and the first one is the deterministic initial deflections which are known a priori and as such they are given as input parameters for the problem. In the second case the initial deflections are uncertain and they have to be obtained according to a given criterion. In the present study they are determined to produce the least favourable initial deflection (largest deflection) at a given point and the solution is obtained by convex modelling. The effect of the actuators, the ply angles and the voltage are studied and their effects on the transverse deflection are investigated. A performance index involving the L₂ norm of the deflections is minimized using the piezo effect and as well as the ply angles the optimal values of which are determined for various problem parameters.