Operational profiles in software-reliability engineering

A systematic approach to organizing the process of determining the operational profile for guiding software development is presented. The operational profile is a quantitative characterization of how a system will be used that shows how to increase productivity and reliability and speed development by allocating development resources to function on the basis of use. Using an operational profile to guide testing ensures that if testing is terminated and the software is shipped because of schedule constraints, the most-used operations will have received the most testing and the reliability level will be the maximum that is practically achievable for the given test time. For guiding regression testing, it efficiently allocates test cases in accordance with use, so the faults most likely to be found, of those introduced by changes, are the ones that have the most effect on reliability     

The future generation of software: a management perspective

The engineering process that underlies software development is examined. A brief summary of how information technology has affected both institutions and individuals in the past few decades is given. Engineering with models and metrics is then discussed. Improving software quality, making software engineering technology more transferable, and transferring software technology into an organization are addressed     

Pan-valvular annular calcification in Takayasu's arteritis: report of 3 cases

Takayasu's arteritis is a chronic inflammatory arteriopathy. It mainly affects the aortic arch and its main branches. The aortic valve annulus and coronary and pulmonary arteries are rarely affected. Mitral and tricuspid annular calcification were not reported previously. We identified mitral annular calcification by using transthoracic echocardiography in 3 patients with Takayasu's arteritis, in whom none had any of the reported causes of mitral annular calcification. Two of them had concomitant tricuspid and aortic annular calcification.     

Synthesis of Poly(p-Benzenesulphonamide) Part I. Preparation of Sulphanilic Acid Derivatives for Use as Intermediates

In view of the unique properties of poly (p-benzamide), particularly as a fibre, the synthesis of the structurally related poly (p-benzenesulphonamide) has been investigated. This first paper describes the preparation of two groups of possible precursors of the polymer starting with sulphanilic acid. The first group includes N-sulphinylaniline-4-sulphochloride, aniline-4-sulphochloride hydrochloride and aniline-4-sulphochloride. The key to the synthesis of these intermediates is the conversion of sulphanilic acid to N-sulphinylaniline-4-sulphochloride by reaction with thionyl chloride in the presence of a catalytic amount of dimethyl formamide. For the synthesis of poly (N-methyl-benzenesulphonamide), N-methylsulphanilic acid has been converted into N-methylaniline-4-sulphochloride hydrochloride by treatment with thionyl chloride. Some N-acetylated sulphanilic acid derivatives, CH₃CONH-C₆H₄-SO₂X, where X?OH, OEt, OC₆H₅ and Cl, and N-acetyl-1-naphthylamine-4-sulphochloride have also been prepared for evaluation as monomers in the synthesis of polysulphonamides by melt polymerisation.     

Changes of electrical properties by Al content of AlxGa1−xAs in pHEMT structures as observed using HRXRD

Characterizations on the pseudomorphic High Electron Mobility Transistor structure under High-Resolution X-ray Diffraction (HRXRD) have been carried out at room temperature. Variation of Al contents in Al_xGa_1−xAs alloys has been found to show a shift of diffraction peaks. This variation is also found to show the change of lattice constant of crystal and also sheet carrier concentration as obtained from a Hall effect measurement. The latter phenomenon is considerably interesting to study in the early stage of the electrical properties of device based on the crystal structure.     

Current-voltage behavior of AlGaAs/InGaAs pHEMT structures and the effect of optical illumination

Various pseudomorphic High Electron Mobility Transistor (pHEMT) structures of AlGaAs/InGaAs alloys have been observed their current-voltage behavior. The tungsten probes were used for a measurement the structures by ramping the voltage from −5 to 5 V and measure the electrical current. Measurement was carried out at room temperature and also under optical illumination. From the measurement, the electrical current was found to increase as the increase of Al content in the AlGaAs alloys layer in the pHEMT structure. This phenomenon was supported by the decrease of sheet resistance as obtained from Hall effect measurement. Under visible light illumination, the current-voltage behavior of pHEMT structure was observed to vary as the light power density was varied for 0, 25 and 55 μW/cm.     

Design and characterization of a low-profile micropositioning stage

This paper discusses the design and characterization of a new, single-axis, low-profile, piezo-driven vertical motion micropositioning stage for use in laser welding applications. A low-profile configuration is attained by mounting the piezo actuator horizontally and using a novel lever arrangement to transfer the horizontal motion of the actuator into the desired vertical motion. An analytical model for the static and dynamic behavior of the stage is presented, along with finite element (FE) modeling verification. A 200 μm motion-range stage was built, and tests show that the stage has a vertical stiffness of 6.0 N/μm and a resonance frequency of 364 Hz. The results are in very close agreement to those predicted by the model.     

Computer simulation of injection molding

The injection-molding process consists of three consecutive stages: filling, packing, and cooling. In order to obtain some insight into the phenomena involved in the process, and particularly in order to evaluate the moldability of certain resins and to predict the microstructure and properties of products molded therefrom, a number of workers have employed a variety of techniques based on mathematical simulation of the process. Mathematical simulation involves writing the relevant continuity, momentum, and energy equations governing the system, with appropriate boundary and initial conditions representing the prevailing conditions in the cavity and delivery channels. In order to obtain meaningful solutions to the above equations, detailed information is required regarding the thermodynamic, thermal, and rheological properties of the resin. Moreover, the prediction of the microstructure and ultimate properties of the molded article requires a knowledge of the morphological, crystallization, and orientation phenomena that take place under the influence of the thermo-mechanical history experienced by the resin. The complexity of the equations involved results in the utilization of a number of simplifying assumptions and the resort to computer simulation and numerical solutions of these equations. A variety of numerical schemes based on finite difference and finite element methods has been employed by various researchers.