Surface modification of electric hair clipper blade for increasing its lifetime

Making the angle of a hair clipper blade edge acute improves its cutting ability but causes the edge to be susceptible to wear, resulting in decreased cutting service life. An enhancement of blade edge hardness of hair clippers by various surface modifications has been studied to increase their wear resistance. Ion nitriding method formed a thick nitrided layer on the mother material surface. PVD and CVD methods formed a fine and thin hard coating at relatively low temperatures. In this study, surface modification by ion plating and plasma CVD methods was carried out to improve the cutting edge qualities of 45° angle blades, material which is used is hardened SUS420J2Mo. The effectiveness was verified by cutting performance lifetime test using artificial hair. It enhanced the cutting performance lifetime of clipper blades more than four times.     

Nanostructure of pure iron anodically oxidized in borate buffer solution and annealed by infrared radiation

The behavior of oxide film on pure iron passivated in a borate buffer solution and subsequently radiated by infrared light (IR) was investigated in comparing to that by just IR annealing without passivation, and was evaluated by film structure, etc. The effect of thermal annealing over 250 degrees C was observed with gamma-Fe2O3 grain growth and sharp increase in surface roughness, film thickness and oxygen content. An ellipsometric parameter of tan psi was sensitively reflected by annealing effect, and tan psi curve had a shoulder at 150 degrees C for 5 min and a peak of tan psi was shifted from 350 nm to 450 nm in wavelength. This shift was also caused by the formation of gamma-Fe2O3, because the peak was also observed in tan psi of the bulk Fe2O3 family. Passivation effects at 800 mV prior to IR annealing on thickness and oxygen content changed at 150 degrees C, and decreased tan psi at 350 nm and excessive film growth over 250 degrees C, and increased oxygen content under 100 degrees C and surface roughness at 50-250 degrees C. The terrace width with atomic scale flatness was slightly increase by passivation prior to IR annealing at 50-250 degrees C, and the maximum terrace width reached larger than 10 nm by passivation and IR annealing at 100 degrees C for 30 min.     

Surface characterization and catalytic properties of La1−x -Sr x CoO3

The surface chemical states of the perovskite-type compounds, strontium doped lanthanum cobalt oxides (La_1?x Sr _x CoO₃), have been investigated using X-ray photoelectron spectroscopy (XPS). Catalytic oxidations of both methane and CO have also been investigated using flow methods. The chemical composition of the surface of La_1?x Sr _x CoO₃ was very different from that in the bulk, which was measured by X-ray fluorescence spectroscopy (XRFS). The catalytic activity of La_1?x Sr _x CoO₃ increased with an increase in the quantity of cobalt atoms on the surface.     

Co-Al基三元系中B2相的溶解度间隙与稳定性

Information on phase equilibria in the Co-Al based systems which are related to some magnetic and heat resistance materials is important for their microstructural control. Recently, it was proposed with a theoretical calculation on electronic band structure that some Heusler-type alloys Co2 XAl (X: Cr and Mn) should be a new type of spinelectronic materials so-called half-metallic ferromagnet. In the case of the Co2CrAl, however, magnetic properties expected from the theoretical work can not been experimentally obtained and the reason has been still unknown. On the other hand, a tunne- ling magnetoresistance (TMR) effect due to the half-metallic properties was reported in Co2 (Cr0.6 Fe0.4 ) Al alloy, but not the Co2CrAl alloy. In the present paper, it is reported that this discrepancy with the theoretical work in the Co2CrAl alloy is bought about by phase separation between A2 and B2 phases, and that the substitution of Fe for Cr can suppress the precipitation of A2 phase in the B2 phase. Such a phase separation is originally due to the miscibility gap between CoAl and Cr formed in the Co-Al-Cr ternary system as well as that reported by Hao et al. in the Ni-Co-Al-Fe system.     

Modeling Party Support of Japanese Voters in the Early 1996

This article investigates factors that influenced Japanese voters in the early 1996 in determining which political party to support. Proportional-odds model, a model which retains ordinal nature of political hues or ideologies of the Japanese political parties, is fitted to the data. Samples with answers “I do not know” to the questions are treated as missing. The EM algorithm enables us to incorporate the samples with missing-values. We found that determining which party to support is a purely political decision for Japanese voters based solely on their ideologies and attitude towards the current cabinet, not to be influenced by their geographical profiles nor financial situations. Missing-value problem were found not to be ignored in the sense that marginally significant or insignificant explanatory variables can easily turn otherwise when the same model is fitted only for the data with no missing-values.

     

Synthesis of boron carbide powder from polyvinyl borate precursor

Polyvinyl borate (PVBO) was prepared by the condensation of poly(vinyl alcohol) (PVA) and boric acid, and used as a precursor for boron carbide. Boron carbide powder was synthesized by the pyrolysis of the PVBO precursor in air at 600 °C for 2 h, followed by heat treatment in Ar flow at 1300 °C for 5 h, which is a relatively low temperature compared with conventional carbothermal methods. Pyrolysis of the PVBO precursor resulted in submicron-size particles of B₂O₃ dispersed in a carbon matrix. In addition, the pyrolysis temperature governed the carbon content in the pyrolyzed product of the PVBO precursor, which led to the synthesis of crystalline boron carbide powder with little free carbon.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

A New Model for the Pollucite Thermal Expansion Mechanism

The thermal expansion behavior of cubic pollucite (CsAlSi₂O₆) in the temperature range 298 to 1473 K was investigated from the viewpoint of crystal structure, based on the model proposed in this study, with Rietveld analysis and high-temperature X-ray powder diffraction. Consequently, it has been found that the CsAlSi₂O₆ structure provides an enlargement-contraction mechanism for two kinds of rings, each composed of six (Si,Al)O₄ tetrahedra in a three-dimensional aluminosilicate framework, in the temperature range 298 to 673 K.