Implementation of self-healing function in ATM networks

This paper proposes an implementation scheme for the self-healing function in ATM (Asynchronous Transfer Mode) networks and assesses its performance in a developed experimental system. First, our proposed ATM self-healing scheme is described. This scheme realizes more rapid restoration of failed Virtual Paths than other self-healing algorithms, supports the node failure case, and minimizes the spare resources required. Next, an implementation scheme is proposed. We propose that the self-healing function can be implemented as a software process, and that OAM (Operation, Administration, and Maintenance) cells be utilized for fast message transmission. Next, results of a prototype system that we implemented on an ATM cross-connect system are discussed. The fundamental characteristics of restoration performance are measured using the experimental system. Based on these results, restoration characteristics of real world scale networks are estimated by computer simulations. The simulation results indicate that any-one link failure is completely restored within 2 seconds.     

Solid‐state characterization and the thermal properties of stereoregular poly(vinyl chloride) prepared by urea clathrate polymerization

The solid‐state characterization of highly stereoregular poly(vinyl chloride) (PVC) prepared by urea clathrate polymerization was carried out by using various instrumental analyses. The structural differences of PVC appeared most remarkably in solubility to organic solvents, IR, WAXD, and solid‐state ¹³C‐NMR spectra. The value of the glass transition temperature (T_g) was about 90°C, not as high as expected, although its detection was quite difficult. The thermal stability was poor, as evidenced by the easy discoloration of this polymer by heat treatment, which was related to the absence of a termination reaction. Dynamic ESR spectra in the solid state clearly indicate that the radical formation occurs at such a low temperature as 160°C in the initial degradation stage. The degradation characteristics of urea clathrate PVC were critically discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2820–2825, 1999     

Antimicrobial resistance of Salmonella enterica serovar Typhimurium isolated from cattle in Japan

The antimicrobial susceptibility of 144 Salmonella enterica serovar Typhimurium isolates collected from all over Japan between 1973 and 1998 were investigated. All the isolates exhibited resistance to four or more antimicrobials and 22 resistance patterns were observed. Isolates showing resistance patterns to ampicillin (A), chloramphenicol (C), streptomycin (S), sulfonamides (Su) and tetracycline (T), which are typical resistance patterns for S. Typhimurium DT104 (DT104), were predominant. Thirty-six of the 68 isolates that exhibited resistance to five or more antimicrobials (ACSSuT+) were identified as DT104 by phage typing. Another 103 S. Typhimurium strains gathered from cattle between 1977 and 1999 in a limited area of Japan were analyzed for molecular epidemiological studies. Results using fluorescent amplified-fragment length polymorphism and pulsed-field gel electrophoresis suggest that clonal exchange of S. Typhimurium among cattle in Japan has occurred since 1992, and that contemporary strains show a remarkable degree of homogeneity with DT104 at a molecular level. The clonal replacement by DT104 affected the antimicrobial resistance pattern of S. Typhimurium from cattle in Japan.     

Development of drift–flux correlation for predicting void fraction in downcomer regions

Accurate prediction of interfacial drag in the downcomer annulus is crucial for the assessment of downcomer void fraction for the loss of coolant accident analysis. The downcomer annulus is the gap between reactor pressure vessel (RPV) exterior and the inner wall of pressure containment vessel (PCV). Based on the previous research, occurrence of the nonuniform two-phase flow in downcomer section is reported, which is partly due to the large wall temperature difference between RPV exterior and the inner wall of PCV. In RELAP5, interfacial drag term in downcomer section is calculated using Kataoka–Ishii and churn-turbulent drift–flux correlations. It has been pointed out that this traditional calculation approach for calculating downcomer void fraction needs modification. The purpose of the current study is to assess the behaviors of drift–flux parameters in downcomer section and to propose an improved distribution parameter model that is suitable for donwcomer boiling analysis.     

Development of radiation-resistant optical fiber for application to observation and laser spectroscopy under high radiation dose

In the Fukushima Daiichi Nuclear Power Station, it is necessary to survey the locations and conditions of fuel debris inside reactor pressure vessels or primary containment vessels under water and radiation environment in preparation for removing fuel debris. An optical fiber is well known for features such as signal transmission, light weight, superior insulation performance, water resistance and electromagnetic noise resistance. These features allow the optical fiber to simplify the instrumentation systems for in-vessel inspection, as long as provide that the optical fiber can be used under high radiation dose environment. The radiation resistance of an optical fiber was improved by increasing the amount of hydroxyl up to 1000 ppm in pure silica fiber. The improved optical fibers were irradiated with γ-ray up to 1 × 10⁶ Gy using a ⁶⁰Co source. They indicated a large peak around 600 nm and a peak tail from ultraviolet region, but no large absorption in infrared region except a hydroxyl absorption peak of 945 nm. We have confirmed that the optical fiber containing 1000 ppm hydroxyl has enough radiation resistance for radiation-induced transmission losses, and the infrared imaging is effective for observation under high radiation doses.     

The Izod impact strength of modified methyl methacryate/styrene copolymer molding and the toughening mechanism

To better understand the Izod impact strength of modified poly(methyl methacrylate‐co‐styrene), the fracture mode and whitened state of molded specimens were studied. The Izod impact strength was closely related to the amount of whitened area, and the degree of whiteness improved with increasing whitened area and degree. The whitened area was strongly related to the transition rate for shear yielding in tensile testing. The degree of whitening was strongly related to the elongation at break in low‐speed tensile testing. Transmission and scanning electron microscopy were also used to develop an understanding of the mechanisms of energy absorption and the fracture process.     

Tunable power splitter based on an electro-optic multimode interference device

Power splitters based on multimode interference (MMI) devices that offer the possibility of dynamically tuning the power-splitting ratio using electro-optic (EO) polymers are presented. The so-called 1 x 2 electro-optic MMI (EO-MMI) is demonstrated to provide a tuning range of 6 dB at approximately 54 V as theoretically predicted. Also a method is discussed to reduce the driving voltage by generating multiple beats, which provide 15 V for a tunable range of 10 dB for r(33)=15 pm/V at wavelength 1.55 microm.     

Signal-integrity improvement method and its robustness evaluation for VLSI and VLSI-packaging

Nowadays, a GHz frequency signal needs to be propagated on a printed circuit board (PCB) with low distortions. In addition, a higher-frequency signal of 10 GHz or more will also need to be propagated with low distortion in very-large-scale integration (VLSI) in the future. However, signal propagation with low distortion is getting more and more difficult as the frequency increases. In order to solve this problem and to ensure signal integrity, we have proposed a novel transmission line called a “segmental transmission line” (STL). In the STL, a transmission line is divided into multiple segments of individual characteristic impedance. The multiple segments are designed to fix the waveform distortion on the transmission line by solving a combinatorial explosion problem using a genetic algorithm. In a previous article, we have shown the effectiveness of an STL designed for a GHz clock signal in computer simulations. We have also fabricated two scaled-up STL prototypes for a clock signal using real printed circuit boards (PCBs). In this article, we input a random signal by changing its frequency to the scaled-up STL prototype designed for a 150-MHz clock signal. We show that the STL has high robustness to the random signals and the frequency fluctuations, which indicates the generality of the STL technique.     

Generation of efficient LALR parsers for regular right part grammars

Summary A method for building small fast LALR parsers for regular right part grammars is given. No grammar transformation is required. No extra state of the LALR parser for the recognition of strings generated by a right part is required. At some reduce states the parser may refer to lookback states (states in which the parser may be restarted after the reduction). An optimizing algorithm to reduce these references is also given.