Extraction Behavior of Actinides and Metal Ions by the Promising Extractant,N,N,N′,N′-Tetraoctyl-3,6-dioxaoctanediamide (DOODA)

Abstract

The extraction of actinides, fission products, some non-nuclear elements, and nitric acid by N,N,N′,N′-tetraoctyl-3,6-dioxaoctanediamide (DOODA-C₈) in dodecane was extensively studied. Also studied was the extraction of HNO₃ and Nd(III) by the tetradodecyl analog of DOODA-C₈ in dodecane. Both extractants contain two ether oxygen atoms in the backbone chain carrying the two amide groups and can thus act as tetradentate ligands. The extractability of actinides decreases in the order Pu(IV) > U(VI), Am(III) > Np(V) in the extraction from nitric acid and Pu(IV) > Am(III) >> U(VI) in the extraction from perchloric acid. Ions of di-, tri-, tetra-, hexa-, and heptavalent metals strongly differ in the extractability by DOODA-C₈ but, except for lanthanides(III), there is no visible correlation of their distribution ratios with ionic radii. Due to the efficient extraction of actinides, weak extraction of fission products, and sufficient extraction capacity, DOODA-C₈ is a promising extractant for the recovery of minor actinides from high-level radioactive wastes.     

Recovery of U and Pu from Nitric Acid using N,N-di(2-ethylhexyl)butanamide (DEHBA) in Mixer-Settler Extractors

The recovery of U and Pu from nitric acid using N,N-di(2-ethylhexyl)butanamide (DEHBA) in mixer-settler extractors was calculated by a simulation code, and a continuous counter-current experiment using mixer-settler extractors was performed. The flow rate, stage number, and nitric acid concentration were chosen as the parameters for the calculation, and the simulation code provided appropriate experimental conditions for separating U from Pu. The continuous counter-current experiment was carried out with three mixer-settler extractors consisted of the following 5 steps: U–Pu extraction (6 stages), Scrub (10 stages), U recovery (6 stages), Pu back-extraction (10 stages), and U back-extraction (16 stages). The results of the continuous counter-current experiment showed that the percentages of U and Pu extracted using 1.5 mol/dm³ (M) DEHBA from 4 M nitric acid were > 99.9% and 97.84%, respectively. Extracted Pu was back-extracted to the aqueous phase via contact with 0.15 M nitric acid, while most of the U content remained in the organic phase. Uranium in the organic phase was then back-extracted via contact with 0.01 M nitric acid, and the percent of U in the U fraction stream was 96.06%. The percentages of U and Pu in the Pu fraction stream were 3.94 % and 97.48%, respectively.     

Plant Growth Inhibition By <Emphasis Type="Italic">Cis</Emphasis>-Cinnamoyl Glucosides and <Emphasis Type="Italic">Cis</Emphasis>-Cinnamic Acid

Spiraea thunbergii Sieb. contains 1-O-cis-cinnamoyl--_d-glucopyranose (CG) and 6-O-(4-hydroxy-2-methylene-butyroyl)-1-O-cis-cinnamoyl--_d-glucopyranose (BCG) as major plant growth inhibiting constituents. In the present study, we determined the inhibitory activity of CG and BCG on root elongation of germinated seedlings of lettuce (Lactuca sativa), pigweed (Amaranthus retroflexus), red clover (Trifolium pratense), timothy (Phleum pratense), and bok choy (Brassica rapa var chinensis) in comparison with that of two well-known growth inhibitors, 2,4-dichlorophenoxyacetic acid (2,4-D) and (+)-2-cis-4-trans-abscisic acid (cis-ABA), as well as two related chemicals of CG and BCG, cis-cinnamic acid (cis-CA) and trans-cinnamic acid (trans-CA). The EC₅₀ values for CG and BCG on lettuce were roughly one-half to one-quarter of the value for cis-ABA. cis-Cinnamic acid, which is a component of CG and BCG, possessed almost the same inhibitory activity of CG and BCG, suggesting that the essential chemical structure responsible for the inhibitory activity of CG and BCG is cis-CA. The cis-stereochemistry of the methylene moiety is apparently needed for high inhibitory activity, as trans-CA had an EC₅₀ value roughly 100 times that of CG, BCG, and cis-CA. Growth inhibition by CG, BCG, and cis-CA was influenced by the nature of the soil in the growing medium: alluvial soil preserved the bioactivity, whereas volcanic ash and calcareous soils inhibited bioactivity. These findings indicate a potential role of cis-CA and its glucosides as allelochemicals for use as plant growth regulators in agricultural fields.     

E8002 Reduces Adhesion Formation and Improves Joint Mobility in a Rat Model of Knee Arthrofibrosis

Knee arthrofibrosis is a common complication of knee surgery, caused by excessive scar tissue, which results in functional disability. However, no curative treatment has been established. E8002 is an anti-adhesion material that contains L-ascorbic acid, an antioxidant. We aimed to evaluate the efficacy of E8002 for the prevention of knee arthrofibrosis in a rat model, comprising injury to the surface of the femur and quadriceps muscle 1 cm proximal to the patella. Sixteen male, 8-week-old Sprague Dawley rats were studied: in the Adhesion group, haemorrhagic injury was induced to the quadriceps and bone, and in the E8002 group, an adhesion-preventing film was implanted between the quadriceps and femur after injury. Six weeks following injury, the restriction of knee flexion owing to fibrotic scarring had not worsened in the E8002 group but had worsened in the Adhesion group. The area of fibrotic scarring was smaller in the E8002 group than in the Adhesion group (p < 0.05). In addition, the numbers of fibroblasts (p < 0.05) and myofibroblasts (p < 0.01) in the fibrotic scar were lower in the E8002 group. Thus, E8002 reduces myofibroblast proliferation and fibrotic scar formation and improves the range of motion of the joint in a model of knee injury.     

Resistant proteins alter cecal short-chain fatty acid profiles in rats fed high amylose cornstarch

The objective of this study was to examine the physiologic importance of undigested protein on cecal fermentation in rats fed a low (LAS) and high (HAS) amylose cornstarch. In Experiment 1, rats were fed diets containing LAS (655 g/kg diet) with one of four protein sources: casein, rice (RP), potato (PP) or soybean protein (SP) at 250 g/kg diet for 15 d. Apparent digestibilities of casein, RP, SP and PP were 96, 94, 93 and 92%, respectively. In rats fed the LAS diet with casein, acetate, propionate and succinate were the major cecal organic acids. The succinate pools in rats fed RP or SP were significantly lower than in those fed casein, whereas butyrate did not differ. Butyrate was significantly higher in rats fed PP, but succinate was the same as in rats fed casein. In Experiment 2, rats were fed diets containing HAS (200 g/kg diet) with one of the four protein sources at 250 g/kg diet for 10 d. HAS was substituted for the same amount of LAS. In rats fed the HAS diet, succinate was the major acid in rats fed casein; in rats fed RP or PP, however, the pools of this acid were significantly lower than in those fed casein, whereas butyrate was significantly higher in rats fed RP or PP. Fecal starch excretion was significantly lower in rats fed RP or PP than in those fed casein. In Experiment 3, rats were fed the casein-HAS diet with graded levels of PP (0, 10, 30, 50, 100 and 250 g/kg diet) for 14 d. The PP was substituted for the same amount of casein. Cecal butyrate was low in rats fed up to 100 g of PP/kg diet and then rose with 250 g of PP/kg diet. In Experiment 4, ileorectostomized rats were used and fed the same diets described in Experiment 3 for 9 d. The ileal starch/nitrogen ratio declined with increasing dietary PP, due solely to greater nitrogen excretion, whereas starch excretion was unaffected. In Experiment 5, rats were fed the casein-HAS diet with or without 60 g of artificial resistant protein/kg diet for 10 d. The resistant protein (apparent digestibility, 63%) was substituted for the same amount of casein. Rats fed the casein-HAS diet with resistant protein had significantly greater cecal butyrate and lower succinate than those fed the casein-HAS diet. These data show that large bowel fermentation of starch is altered by dietary protein. They support the hypothesis that nondigested protein, namely, resistant protein, may control fermentation efficiency as well as the fermentation profile of HAS, possibly as a result of a change in microflora through the change in the ratio of starch to nitrogen in the cecum.     

Allosteric Inhibition of c-Abl to Induce Unfolded Protein Response and Cell Death in Multiple Myeloma

Endoplasmic reticulum stress activates inositol-requiring enzyme 1α (IRE1α) and protein kinase, R-like endoplasmic reticulum kinase (PERK), the two principal regulators of the unfolded protein response (UPR). In multiple myeloma, adaptive IRE1α signaling is predominantly activated and regulates cell fate along with PERK. Recently, we demonstrated that GNF-2, an allosteric c-Abl inhibitor, rheostatically enhanced IRE1α activity and induced apoptosis through c-Abl conformational changes in pancreatic β cells. Herein, we analyzed whether the pharmacological modulation of c-Abl conformation resulted in anti-myeloma effects. First, we investigated the effects of GNF-2 on IRE1α activity and cell fate, followed by an investigation of the anti-myeloma effects of asciminib, a new allosteric c-Abl inhibitor. Finally, we performed RNA sequencing to characterize the signaling profiles of asciminib. We observed that both GNF-2 and asciminib decreased cell viability and induced XBP1 mRNA splicing in primary human myeloma cells and myeloma cell lines. RNA sequencing identified the induction of UPR- and apoptosis-related genes by asciminib. Asciminib re-localized c-Abl to the endoplasmic reticulum, and its combination with a specific IRE1α inhibitor, KIRA8, enhanced cell death with the reciprocal induction of CHOP mRNA expression. Together, the allosteric inhibition of c-Abl-activated UPR with anti-myeloma effects; this could be a novel therapeutic target for multiple myeloma.     

Reaction Mechanism and Kinetics of Boron Removal from Molten Silicon via CaO-SiO2-CaCl2 Slag Treatment and Ammonia Injection

Metallurgical and Materials Transactions B - To improve the boron-removal efficiency of metallurgical-grade silicon by increasing the reaction rate, a combined method with the...     

Electrical Characteristics of Ultrahigh-Voltage Thyristors and Related Problems

Ultrahigh-voltage thyristors with a blocking voltage of 4-10 kV were developed by double diffusion technique. A new surface contouring technique realized in this development gives excellent blocking characteristics and is effective in minimizing the reduction of current-carrying area. To study the feasibility of ultrahigh-voltage thyristors, their electrical characteristics were estimated. According to the experimental results, the blocking voltage is restricted by their dynamic properties, especially turn-off time. The limit for the rated voltage may be about 5 kV at the present stage.     

Transmittance enhancement of spark plasma sintered CaF2 ceramics by preheating commercial powder

Spark plasma sintering (SPS) is a convenient approach for preparing transparent CaF₂ ceramics. However, carbon contamination is a key issue that should be addressed to achieve high transparency. In this study, a commercially available CaF₂ powder was preheated under vacuum before performing SPS to mitigate carbon contamination. During the preheating of the CaF₂ powder, impurities adsorbed on the particle surface, such as H₂O, CO₂, and O₂, are desorbed. Moreover, the interdiffusion of carbon contaminants is suppressed due to the pre-sintering of the raw powder. The in-line transmittance of the CaF₂ ceramic prepared from the preheated powder increased to 85 % at the wavelength of 1100 nm, which is 38 % higher than that of the ceramic prepared without preheating. In addition, the in-line transmittance increased with increasing grain size of the ceramic, possibly because of the decrease in the number of scattering sources with the reduction in the grain boundary fraction.     

Distribution of carbon contamination in oxide ceramics occurring during spark-plasma-sintering (SPS) processing: II - Effect of SPS and loading temperatures

Carbon contamination during the SPS processing was investigated in the spinel, alumina and zirconia. The carbon contamination changes with the SPS conditions and the target materials. At the high heating rate of 100?°C/min, the contamination occurred over the entire area in the spinel, but only around the surface areas in the alumina and zirconia. For the spinel, the contamination is sensitive to the SPS parameters, such as the heating rate and loading conditions, but less sensitive to the sintering temperature. This suggests that the carbon contamination was caused by evaporation of CO gas from the carbon paper/dies. At the high heating rates, the carbon evaporation is enhanced due to the rapid heating, and then, the evaporated CO gases are encapsulated into the closed pores during the heating process and remain in the matrix. The carbon contamination can be suppressed by a high temperature loading even at the high heating rate.