Wideband HEMT MMIC low-noise amplifier with temperaturecompensation

A wideband low-noise pseudomorphic HEMT MMIC variable-gain amplifier has been designed and fabricated. The amplifier has a nominal gain of 13 dB across the band 2-20 GHz, with gain flatness better than ±0.4 dB. The noise figure is less than 3 dB across the band 6-16 GHz. An on-chip temperature-sensing diode is used to provide a linear temperature correction which has been used to reduce the gain variation of the amplifier by a factor of 2 across the temperature range -50°C to +95°C     

Performance of asynchronous DS-CDMA system with long and shortspreading codes

The effect of spreading code length on the BER performance of an asynchronous DS-CDMA system is studied by means of Monte Carlo simulation. The probability of the crosscorrelation value between segments of long sequences is also discussed. Results indicate that the system performance with very long codes is ~1 dB worse compared to that of short CDMA codes     

A prototype 3D optically interconnected neural network

We report the implementation of a prototype three-dimensional (3D) optoelectronic neural network that combines free-space optical interconnects with silicon-VLSI-based optoelectronic circuits. The prototype system consists of a 16-node input, 4-neuron hidden, and a single-neuron output layer, where the denser input-to-hidden-layer connections are optical. The input layer uses PLZT light modulators to generate optical outputs which are distributed over an optoelectronic neural network chip through space-invariant holographic optical interconnects. Optical interconnections provide negligible fan-out delay and allow compact, purely on-chip electronic H-tree type fan-in structure. The small prototype system achieves a measured 8-bit electronic fan-in precision and a calculated maximum speed of 640 million interconnections per second. The system was tested using synaptic weights learned off system and was shown to distinguish any vertical line from any horizontal one in an image of 4×4 pixels. New, more efficient light detector and small-area analog synapse circuits and denser optoelectronic neuron layouts are proposed to scale up the system. A high-speed, feed-forward optoelectronic synapse implementation density of up to 10⁴/cm² seems feasible using new synapse design. A scaling analysis of the system shows that the optically interconnected neural network implementation can provide higher fan-in speed and lower power consumption characteristics than a purely electronic, crossbar-based neural network implementation     

Superconductivity in nearly single-phase Bi-Pb-Sr-Ca-Cu-O samples with different nominal compositions

The preparation conditions, phase composition, and superconducting properties of Bi-Pb-Sr-Ca-Cu oxide materials from different nominal compositions have been investigated. Nearly single-phase samples from Bi₂Pb_0.4Sr₂Ca₃Cu₄O _y , as well as from the proposed compositions Bi_1.8Pb_0.4Sr₂Ca₃Cu₄O _y and Bi_1.8Pb_0.4Sr₂Ca_2.5Cu_3.5O _y were obtained by a solid-state reaction in air. Samples with the third nominal composition showed the best superconducting properties (T _on=111 K and zero resistance atT ₀=103 K). A possible mechanism for the 2223 phase formation in the three investigated compositions has been discussed.     

D-lactic acidosis: a treatable encephalopathy in pediatric patients

Isolation of Salmonella from the feces of impounded dogs was carried out to make clear the recent microbiological condition of dogs introduced into our facilities. Salmonella was isolated from 10 out of 283 samples (3.5%). Inparticular, during the first week after introduction, Salmonella was isolated from nine out of 74 dogs (12.2%). The isolation rate during the first week after introduction was significantly higher than that for dogs introduced later. No isolates were detected from dogs reared for more than 3 weeks after introduction. This study indicates that impounded dogs had the highest risk of infecting a person with Salmonella during the first week after introduction into our laboratory animal facilities, and that we need to pay attention to this fact when handling them.     

Occupational lead exposure and hearing loss

Studies of adults, children, and laboratory animals suggest an association between lead exposure and hearing loss. A causal relationship might direct mandated medical surveillance of lead-exposed workers to include audiometric testing. A cross-sectional, computerized dataset was obtained from a private occupational health screening company to examine the relationship between blood lead level and hearing loss. Audiometry and blood lead results were available for 183 workers. A statistically significant correlation was found between blood lead level and an elevated hearing threshold at 400 Hz (P = 0.03); no other frequencies showed such a correlation. This finding suggests either an interaction between nose exposure and lead, interaction of other exposure factors (such as cigarette smoking), or that factors other than biomechanical ones render the organ of Corti more susceptible at 4000 Hz. Further evaluation of these questions should be undertaken. Computerized databases created for worker surveillance may be a source for data useful for examining other causal connections in occupational settings.     

Inductively coupled plasma etching of InGaP, AllnP, and AlGaP in Cl2 and BCl3 chemistries

Dry etching of InGaP, AlInP, and AlGaP in inductively coupled plasmas (ICP) is reported as a function of plasma chemistry (BCl₃ or Cl₂, with additives of Ar, N₂, or H₂), source power, radio frequency chuck power, and pressure. Smooth anisotropic pattern transfer at peak etch rates of 1000–2000Å·min^?1 is obtained at low DC self-biases (?100V dc) and pressures (2 mTorr). The etch mechanism is characterized by a trade-off between supplying sufficient active chloride species to the surface to produce a strong chemical enhancement of the etch rate, and the efficient removal of the chlorinated etch products before a thick selvedge layer is formed. Cl₂ produces smooth surfaces over a wider range of conditions than does BCl₃.