注射模CAE远程应用系统的研究与实现

研究了注射模CAE远程应用系统的实现方法。围绕建立最优系统模型 ,探讨了数据压缩算法和FTP文件服务 ,并采用主从服务器分离法提高系统性能。为进一步优化系统 ,运用了多线程、套接字、ADO和RAS远程拨号等技术。     

Effect of particle size on thermo-physical properties of SiC_p/Cu composites fabricated by squeeze casting

For the electronic packaging applications, copper matrix composites reinforced with different sized SiC particles (10 μm, 20 μm and 63 μm) were fabricated by squeeze casting technology. And the effect of particle size on their thermo-physical properties was discussed. The composites are free of porosity and the SiC particles are distributed uniformly in the composites. It is found that the mean linear thermal expansion coefficients(20 - 100 ℃ ) of SiCp/Cu composites are in the range of (8.4 - 9.2) × 10-6/℃, and smaller expansion coefficient can be obtained for the composites with finer SiC particles because of the larger restriction in expansion through interfaces. Their thermal conductivities are reduced with the decrease of SiC sizes. This is attributed to the fact that the negative effect of interfacial thermal resistance becomes increasingly dominant as the particles becomes smaller.     

Improvement of Wear Resistance of Magnesium Alloy AZ91HP by High Current Pulsed Electron Beam Treatment

MAGNESIUM ALLOYS exhibit high strength toweight ratio and stiffness and are finding theirapplications in air,automobile and electronic industries.Despite the worldwide growing interests inmagnesium alloys,their inferior wear resistance is aserious impediment.Considering that wear is asurface-related behavior,surface modification canresolve the problem.Recently,intense and pulsed energetic beams areemerging as new and effective methods for surfacemodification.The High Current Pulsed Ele…     

铸造工程专家系统技术的研究现状及进展

简要概述专家系统技术在铸造工程中的应用；归纳国内、国外铸造专家系统的研究成果与应用动态，探讨其今后的发展方向。     

微液滴现象与大气腐蚀——Ⅰ.微液滴的形成与扩展

采用改变相对湿度、无机盐粒/金属组合和环境气氛等参数的方法研究了微液滴形成、生长的特征及其与大气腐蚀过程的关系.结果表明,微液滴形成和生长与气氛中氧和相对湿度及盐粒/金属组合密切相关.在大气环境中,微液滴形成和生长需要两个前提条件:第一,环境相对湿度须高于盐粒水解液滴液面的饱和蒸气压;第二,水解液滴下的金属应能被液滴腐蚀.     

微液滴现象与大气腐蚀——Ⅱ.微液滴现象的电化学表征

用扫描Kelyin探头和电化学极化等手段,研究了微液滴现象与大气腐蚀的电化学过程之间的相关性.扫描Kelvin探头测定主液滴周围的电位分布显示,微液滴只在表面的正电性区域出现;当有微液滴形成时,火山形电位分布的峰高且宽、谷深且窄;同时,峰变宽的速率与微液滴的扩展速率近似相等.电化学极化结果显示,微液滴的成核速率随极化电流的增加而线性加速,促使大气腐蚀过程发生的电位差和相应的腐蚀电流是微液滴形成和发展的推动力.     

偶氮氯膦Ⅰ光度法同时测定硅砂中氧化钙和氧化镁

试验了Ca2 、Mg2 与偶氮氯膦Ⅰ同时显色的条件,Ca2 、Mg2 对显色的相互影响。试验结果表明,100μg CaO(50 ml)存在下,不影响MgO的显色,0～50μg MgO(50 ml)符合比耳定律,相关系数r=0.999 8,表观摩尔系数ε=1.83×104 L/mol.cm。30μg MgO(50 ml)存在下,不影响CaO的显色,0～100μg CaO(50 ml)符合比耳定律,相关系数r=0.999 1,表观摩尔系数ε=1.53×104 L/mol.cm。建立了偶氮氯膦Ⅰ光度法同时测定硅砂中CaO、MgO的方法。用所建立的方法对硅砂标准样品进行测定,结果十分满意。     

连铸坯圆盘式去毛刺机活塞杆导向结构分析

针对圆盘式去毛刺机在安装调试中出现的问题,分析了其活塞杆导向结构,提出了解决方案,最终得到满意的结果.     

Induction plasma spheroidization of tungsten and molybdenum powders

The melting, evaporation and oxidation behaviors as well as the solidification phenomena of tungsten and molybdenum in induction plasma were studied. Scanning electron microscopy was used to examine the morphology and the cross section of plasma-processed powders. X-ray diffraction was used to analyze the oxides formed on the particle surface of these two metals. The influence of spray chamber pressure on the spheroidization and oxidation phenomena was discussed. The results show that fewer Mo particles than W particles are spheroidized at the same powder feed rate under the same plasma spray condition although molybdenum has a lower melting point. A small fraction of tungsten is evaporized and condensed either on the surface of tungsten particles nearby or on the wall of spray chamber. Tungsten oxides were found in tungsten powder processed under soft vacuum condition. Extremely large grains form inside some spheroidized particles of tungsten powder.