Effect of Wall Surface Properties at Different Drying Kinetics on the Deposition Problem in Spray Drying

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

真空联合堆载预压法加固软基实践研究

简要介绍了凫洲大桥南引道软基真空联合堆载预压处理方案,并对软基处理效果进行了分析,得出了真空联合堆载预压法施工工艺成熟,施工方法简单,能增加地基承载力的结论,可供类似工程参考。     

基于遗传算法的土钉支护结构优化设计研究

通过建立三维有限元模型,对土钉支护的变形和受力性能进行分析,得出土钉力的合理分布。在此基础上,考虑土钉支护的水平位移,采用遗传算法,对土钉支护的结构优化设计进行研究,建立了土钉支护结构的优化设计数学模型,并编制了相应的计算程序。通过算例分析,并与基于极限平衡分析的优化结果相比较,得出合理的土钉支护结构设计的参考结论。     

One-to-Many and Many-to-One Optical Chaos Communications Using Semiconductor Lasers

A theoretical construction of one-to-many (OTM) and many-to-one (MTO) chaos synchronization communications using semiconductor lasers is presented. One center laser provides strong injections (strong link) to other side lasers, and the side lasers also provide weak injections (weak link) to the center one. Simulation results show that the side lasers synchronize with the center laser through injection-locking. In addition, messages transmitted via the strong links or the weak links experience strong chaos pass filtering, enabling us to realize OTM and MTO communications.     

VSC8150在波分复用系统开销提取中的应用

波分复用系统将不同波长的光复用在一起进行传输,以满足对传输容量和传输距离的各种需求。介绍了一种开销监视与提取的设计方法,使用VSC8150提取承载在波分复用系统相应波长上SDH信号的开销。分析了VSC8150的工作原理,管脚和外部接口,以及与FPGA、单片机共同完成B1重新计算,开销提取,B1,J0提取。此外,还提出将帧丢失,帧失步等错误状态传送给单片机和网管的方法。本设计增强了波分复用系统网管管理参数,功能和灵活性,这会在系统维护时带来较大的方便。该设计已经成熟应用在实际的波分复用系统中。     

南京老虎山黄土-古土壤剖面不同粒级组分的磁化率及其古气候意义

利用沉降离心法将老虎山黄土-古土壤的酸不溶相分离成<2μm、2～45μm和>45μm三个粒级组分,并分别测定了这些组分和全岩的磁化率。结果表明,无论是全岩,还是三个不同粒级组分,它们的磁化率都可以单独作为长江中下游地区古气候演变的参考指标。其中,<2μm粒级的质量磁化率明显大于全岩和2～45μm、>45μm两粒级,而且其分辨率也明显高于2～45μm和>45μm这两个粒级组分。本实验结果还显示,虽然<2μum的质量磁化率最大,但对全岩质量磁化率的贡献率与2～45μm粒级相当,>45μm粒级的贡献率较低。     

基于频率采样技术的FIR数字滤波器优化设计

本文提出了一种FIR数字滤波器满意优化设计方法，将滤波器过渡带样本值作为优化变量，通过设计通带、过渡带和阻带性能指标满意度函数和综合满意度函数，构造出满意优化模型，并用本文提出的新量子遗传算法搜索满意解，FIR高通和带阻数字滤波器的设计结果表明，采用满意优化方法设计的FIR滤波器的性能优于传统方法。     

接收机整机最小噪声系数的实现

前级LNA的性能指标的好坏对接收机整体性能起主要作用。较流行的设计方法是用ADS等仿真软件在Smith圆图上作出LNA的等增益圆和等噪声圆，以确定LNA是否同时满足所要求的增益和噪声系数指标。这种方法虽然满足了设计要求，但往往不能获得整机噪声的最佳点。本文在符合设计指标后进一步对噪声和增益的关系进行分析，建立适用于常用接收机的简单模型，在此基础上获得基于整机噪声的最佳点。这种设计方法可以广泛应用于各种微波接收系统中,降低整机哭声系数.