Dynamic spectrum access in terrestrial TV band: assessment of prospects in Kenya

Wireless connectivity has become a significant part of human life all over the world, both in developing and developed countries. In order to provide sufficient coverage without the densification of cellular networks, relatively low carrier frequencies should be used. This paper considers the reuse of the digital terrestrial television (DTT) band for cellular system operation in Kenya, while protecting incumbent TV signal reception according to the Dynamic Spectrum Alliance (DSAL) rules. A state of the art model for DTT coverage and allowed cellular system power calculation is tested using real data for Kenya. Suggestions regarding future DSAL rules amendments are provided. Moreover, the amount of spectrum resources available for cellular system operation in the DTT band in Kenya is estimated against varying system parameters.

     

Effect of biological wastewater treatment on the molecular weight distribution of soluble organic compounds and on the reduction of BOD, COD and P in pulp and paper mill effluent

Pulp and paper mill wastewater was characterizated, before (influent) and after (effluent) biological wastewater treatment based on an activated sludge process, by microfiltration (8, 3, 0.45 and 0.22mum) and ultrafiltration (100, 50, 30 and 3kDa) of the wastewater samples into different size fractions. Various parameters were measured on each fraction: molecular weight distribution (MWD) using high performance size exclusion chromatography (HPSEC), total organic carbon (TOC), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), phosphate phosphorus (PO(4)-P), electrical conductivity, pH, turbidity, charge quantity and zeta potential. The MWD, TOC and COD(Cr) results indicated that the majority of the material present in both the influent and effluent was in the medium molecular weight (MW) range (i.e. MW<10kDa) with three main MW sub-fractions. There were no significant differences in the range of the MWD between the influent and effluent samples. The magnitude of the MWD in the effluent was about one half that in the influent, the greatest reduction being in the 6kDa fraction. The 3kDa fractions of both the influent and effluent showed a considerable increase in BOD(7), probably due to the removal of compounds harmful to bacteria in 3kDa ultrafiltration. Influent turbidity decreased considerably in microfiltration (8-0.22mum). As the turbidity was removed by 0.22mum filtration, the anionic charge quantity started to decrease. Particles in the influent and effluent contained 19-29% and 14-20% of the total phosphorus, respectively. The major phosphorus fraction was in the form of soluble phosphate.     

Spatial planning in subsurface architecture

Achieving a pleasant, safe and orderly atmosphere in an underground building requires careful planning. Special consideration must be given to provisions for access and egress, lighting, and interior decor. The author discusses these topics and many other aspects of underground design, including orientation, passages, uses of interior space, wall and floor surfaces, and creative lighting solutions.     

Electrostatic precipitator performance and trace element emissions from two Kraft recovery boilers

Fine particle emissions from combustion sources have gained attention recently due to their adverse effects on human health. The emission depends on the combustion process, fuel, and particulate removal technology. Particle concentrations at Kraft recovery boiler exits are very high, and the boilers are typically equipped with electrostatic precipitators (ESP). However, little data are available on the ESP performance in recovery boilers. Particle concentrations and size distributions were determined at two modern, operating recovery boilers. In addition, we determined the fractional collection efficiency of the ESPs by simultaneous measurements at the ESP inlet and outlet and the particulate emissions of trace metals. The particle mass concentration atthe ESP inlet was 11-24 g/Nm3 at the two boilers. Particle emissions were 30-40 mg/ Nm3 at boiler A and 12-15 mg/Nm3 at boiler B. The particle size distributions had a major particle mode at around 1 microm. These fume particles contained most of the particle mass. The main components in the particles were sodium and sulfate with minor amounts of chloride, potassium, and presumably some carbonate. The ESP collection efficiency was 99.6-99.8% at boiler A and 99.9% at boiler B. The particle penetration through the ESP was below 0.6% in the entire fume particle size range of 0.3-3 microm. Trace element emissions from both boilers were well below the limit values set by EU directive for waste incineration.     

Analysis of Impedance and Noise Data of an X-Ray Transition-Edge Sensor Using Complex Thermal Models

The so-called excess noise limits the energy resolution of transition-edge sensor (TES) detectors, and its physical origin has been unclear, with many competing models proposed. Here we present the noise and impedance data analysis of a rectangular X-ray Ti/Au TES fabricated at SRON. To account for all the major features in the impedance and noise data simultaneously, we have used a thermal model consisting of three blocks of heat capacities, whereas a two-block model is clearly insufficient. The implication is that, for these detectors, the excess noise is simply thermal fluctuation noise of the internal parts of the device. Equations for the impedance and noise for a three-block model are also given.     

Enhancement of anaerobic hydrogen production by iron and nickel

The effects of iron and nickel on hydrogen (H₂) production were investigated in a glucose-fed anaerobic Continuous Flow Stirred Tank Reactor (ACSTR). Both iron and nickel improved the reactor performance and H₂ production was enhanced by 71% with the sole iron or nickel supplementation. In all cases, H₂ production yield was increased by lowering both ethanol and total metabolites production and increasing butyrate production. Furthermore, iron and nickel slightly increased biomass production while glucose degradation decreased with the supplementation of nickel. Dynamic changes in bacterial composition as analyzed by 16S rRNA gene-targeted denaturing gradient gel electrophoresis (DGGE) revealed that hydrogen was produced mainly by Clostridium butyricum strains and that nickel addition decreased the microbial diversity.     

Worker coordination policies in parallel station systems: performance models for a set of jobs and for continuous arrival of jobs

Varying workloads and uncertain processing times in parallel assembly cause idle times for skilled, high-cost workers. This idleness can be avoided and the utilisation of the workers improved by allowing workers to move between the stations to help each other. Worker movement between assembly stations needs efficient and feasible coordination, and therefore, this paper compares four different worker coordination policies: no helping, floater, pairs and complete helping. The dynamics of the policies are modelled by studying the parallel assembly as a continuous-time Markov process. The system is studied with two different job release cases for non-identical jobs (customised products). In the first case, a given number of jobs have to be completed by the entire system. In the second case, new jobs arrive with a Poisson-distributed rate. The models assume that when one worker helps another, their collaborative inefficiency reduces the productivity. The models are used in numerical experiments to compare the performances of worker coordination policies as average job cycle times. The main conclusions from the results suggest the use of the complete helping policy in minor collaborative inefficiency conditions, especially with a given set of jobs. The pairs policy is a reasonable alternative in major inefficiency conditions with the continuous arrival of jobs.     

From local structure to nanosecond recrystallization dynamics in AgInSbTe phase-change materials

Phase-change optical memories are based on the astonishingly rapid nanosecond-scale crystallization of nanosized amorphous 'marks' in a polycrystalline layer. Models of crystallization exist for the commercially used phase-change alloy Ge(2)Sb(2)Te(5) (GST), but not for the equally important class of Sb-Te-based alloys. We have combined X-ray diffraction, extended X-ray absorption fine structure and hard X-ray photoelectron spectroscopy experiments with density functional simulations to determine the crystalline and amorphous structures of Ag(3.5)In(3.8)Sb(75.0)Te(17.7) (AIST) and how they differ from GST. The structure of amorphous (a-) AIST shows a range of atomic ring sizes, whereas a-GST shows mainly small rings and cavities. The local environment of Sb in both forms of AIST is a distorted 3+3 octahedron. These structures suggest a bond-interchange model, where a sequence of small displacements of Sb atoms accompanied by interchanges of short and long bonds is the origin of the rapid crystallization of a-AIST. It differs profoundly from crystallization in a-GST.     

Photodegradation of Selected Aromatic Constituents of Creosote in Organic Solvents

Polycyclic aromatic hydrocarbons (PAHs), naphthalene, phenanthrene, anthracene, and pyrene were irradiated in acetonitrile (CH₃CN) and in dichloromethane (CH₂Cl₂) on individual PAH compounds and in the presence of other compounds. The observed photodegradation of PAHs was dependent on the structure of the compound. Anthracene and pyrene were the most photoreactive in dichloromethane: with total degradation after 0.5 h irradiation for anthracene and 1.5 h for pyrene. The decomposition of PAHs was faster in dichloromethane than in acetonitrile.     

Study of the PM Gas-Phase Filter Artifact Using a Setup for Mixing Diesel-Like Soot and Hydrocarbons

The filter artifact is a significant source of error in gravimetric measurements of particulate matter (PM) exhaust. However, only a few studies on the subject exist. Results from these studies show a large discrepancy mainly because the experiments were performed using real diesel vehicle exhaust with varying exhaust composition. In this study, a setup for mixing diesel-like soot and hydrocarbon vapor was constructed for generating a stable exhaust aerosol with adjustable composition. The particle size distribution of the diesel-fueled soot generator (GMD [geometric mean diameter] adjustable between 27 and 164 nm) was found to represent “real” exhaust particulate emission. This setup was applied for studying the filter artifact on Teflon-coated glass fiber filters using pentadecane as the hydrocarbon vapor. Experiments were performed using particle and hydrocarbon concentrations of 130–700 μg/m³ and 10–12 ppm, respectively. It was found that the particle concentration of the aerosol affects the filter artifact. At lower particle concentrations, more hydrocarbon adsorption was detected. In the absence of particles, the adsorption was highest. Furthermore, filter soot load, corresponding to 0.13%–0.66% of the clean filter mass, was found to affect adsorption. Sooty filters adsorbed less vapor than clean filters. However, increasing the soot load resulted in more adsorption. Moreover, it was found that the backup filter serves as a reasonable estimate of the filter artifact only for low particle concentrations and filter soot loads. These results indicate that the filter soot load is an important parameter influencing the filter artifact, and therefore, it should be considered when performing gravimetric sampling. The setup was proven to be a unique tool for quantitative studies of the filter artifact.

Copyright 2012 American Association for Aerosol Research