Analysis of ethanol in soy sauce using electronic nose for halal food certification

The purpose of this study was to analyze ethanol content in soy sauce using mass spectrometry (MS) with electronic nose (e-nose) to determine if MS e-nose can replace gas chromatographic analysis for halal certification. Gas chromatography–flame ionization detector (GC-FID), the standard method of ethanol content, was used to analyze 24 different kinds of soy sauce. Ethanol was detected from 13 soy sauce samples in the concentration range of 0.0004–1.7wt%. The MS e-nose data were analyzed by discriminant function analysis (DFA). Based on an addition method, the results were more than 96.6% accurate when the ethanol concentrations were greater than 0.5%. A high correlation between the first score of the DFA plot and the ethanol concentration was observed. Thus, mass spectrometry based on e-nose is an efficient method for determining ethanol as a primary screening tool for halal certification.     

A geometric approach to animating thin surface features in smoothed particle hydrodynamics water

We propose a geometric approach to animating thin surface features of smoothed particle hydrodynamics‐based water. Explicit interparticle connections are created among smoothed particle hydrodynamics particles to approximate the geometries of thin surfaces while addressing the issue of unresolved surface areas. The deformations measured on the connections actuate the animations of the surfaces by disconnecting the stretched and bent connections. The reconstruction of thin surfaces and the accuracy of the animation are improved by adding auxiliary particles over the connections via Poisson‐disk sampling. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural and Piezoelectric Properties of (Na1−xKx)NbO3 Platelets and Their Application for Piezoelectric Nanogenerator

(Na_1?xK_x)NbO₃ (NKN) platelets synthesized at 600°C for 12 h have an Amm2 orthorhombic structure. However, the structure of NKN platelets synthesized at 500°C is a mixture of R3m rhombohedral and Amm2 orthorhombic structures. The formation of a rhombohedral structure is attributed to the presence of OH^? and H₂O defects in the NKN platelets. The piezoelectric strain constant (d₃₃) of NKN platelets synthesized at 600°C for 12 h is 100 pmV^?1, whereas that of NKN platelets synthesized at 500°C is lesser (50 pmV^?1) due to the presence of these defects. Piezoelectric nanogenerators (PNGs) are fabricated using composites consisting of NKN platelets and polydimethylsiloxane. A large output voltage of 25 V and output current of 2.7 μA were obtained for the PNG with NKN platelets synthesized at 600°C for 6 h. This PNG shows a high output electrical energy of 3.0 μW at an external load of 5.1 MΩ.     

Solvent- and Light-Sensitive AIEE-Active Azo Dye: From Spherical to 1D and 2D Assemblies

Fluorescent molecular assembly systems provide an exciting platform for creating stimuli-responsive nano- and microstructured materials with optical, electronic, and sensing functions. To understand the relationship between (i) the plausible molecular structures preferentially adopted depending on the solvent polarity (such as N,N-dimethylformamide [DMF], tetrahydrofuran [THF], and toluene), (ii) the resulting spectroscopic features, and (iii) self-assembled nano-, micro-, and macrostructures, we chose a sterically crowded triangular azo dye (3Bu) composed of a polar molecular core and three peripheral biphenyl wings. The chromophore changed the solution color from yellow to pink-red depending on the solvent polarity. In a yellow DMF solution, a considerable amount of the twisted azo form could be kept stable with the help of favorable intermolecular interactions with the solvent molecules. By varying the concentration of the DMF solution, the morphology of self-assembled structures was transformed from nanoparticles to micrometer-sized one-dimensional (1D) structures such as sticks and fibers. In a pink-red toluene solution, the periphery of the central ring became more planar. The resulting significant amount of the keto-hydrazone tautomer grew into micro- and millimeter-sized 1D structures. Interestingly, when THF-H₂O (1:1) mixtures were stored at a low temperature, elongated fibers were stacked sideways and eventually developed into anisotropic two-dimensional (2D) sheets. Notably, subsequent exposure of visible-light-irradiated sphere samples to solvent vapor resulted in reversible fluorescence off↔on switching accompanied by morphological restoration. These findings suggest that rational selection of organic dyes, solvents, and light is important for developing reusable fluorescent materials.     

Application of solid phase-microextraction (SPME) and electronic nose techniques to differentiate volatiles of sesame oils prepared with diverse roasting conditions

Headspace volatiles of sesame oil (SO) from sesame seeds roasted at 9 different conditions were analyzed by a combination of solid phase microextraction (SPME)-gas chromatography/mass spectrometry (GC/MS), electronic nose/metal oxide sensors (MOS), and electronic nose/MS. As roasting temperature increased from 213 to 247 °C, total headspace volatiles and pyrazines increased significantly (P < 0.05). Pyrazines were major volatiles in SO and furans, thiazoles, aldehydes, and alcohols were also detected. Roasting temperature was more discrimination factor than roasting time for the volatiles in SO through the principal component analysis (PCA) of SPME-GC/MS, electronic nose/MOS, and electronic nose/MS. Electronic nose/MS showed that ion fragment 52, 76, 53, and 51 amu played important roles in discriminating volatiles in SO from roasted sesame seeds, which are the major ion fragments from pyrazines, furans, and furfurals. SO roasted at 213, 230, and 247 °C were clearly differentiated from each other on the base of volatile distribution by SPME-GC/MS, electronic nose/MOS, and electronic nose/MS analyses. Practical Application: The results of this study are ready to apply for the discriminating samples using a combinational analysis of volatiles. Not only vegetable oils prepared from roasting process but also any food sample possessing volatiles could be targets for the SPME-GC/MS and electronic nose assays. Contents and types of pyrazines in sesame seed oil could be used as markers to track down the degree of roasting and oxidation during oil preparation.     

Lower Tropospheric Aerosol Measurements by MAX-DOAS During Severe Asian Dust Period

A recently developed aerosol retrieval algorithm based on O₄ slant column densities (SCDs) measured at a visible wavelength (476 nm) was utilized to derive aerosol information (e.g., aerosol optical depth (AOD) and vertical distributions of aerosol extinction coefficients (AECs)) in the lower troposphere during a severe Asian dust period. The MAX-DOAS measurements were carried out at Gwangju, Korea for nearly three months from February through May 2008. Comparison with AOD and surface PM₁₀, measured by collocated sunphotometer and beta gauge sampler, were made to validate the retrieved AODs and AECs in the atmospheric layer surface to 1 km height above ground. On the Asian dust days, temporal variations of the AODs retrieved from MAX-DOAS measurements show similar patterns, but with reduced magnitudes, to those measured by sunphotometer whereas similar AOD magnitude and temporal variation was observed between MAX-DOAS and sunphotometer measurements during the non-episodic days. Smaller correlation was observed between the surface PM₁₀ and AECs at 0.5 km during the Asian dust period compared to the correlation obtained for the non episodic days. This study demonstrates the ability of MAX-DOAS as a remote sensing technique for surface aerosol measurements under conditions of homogeneously distributed pollution in the planetary boundary layer. However, for the measurement of significantly enhanced aerosol loads with heterogeneous vertical distribution (e.g., Asian dust), measured AODs and AECs are underestimated at altitudes above 1 km due to decreased sensitivity of MAX-DOAS measurements at high altitudes.     

Preparation of high‐molecular‐weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4′‐azobis(4‐cyanovaleric acid)

Vinyl acetate (VAc) was solution‐polymerized at 40°C and 50°C using 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as an initiator and methanol as a solvent, and effects of polymerization temperature and initiator concentration were investigated in terms of conversion of VAc into poly (vinyl acetate) (PVAc), degree of branching (DB) for acetyl group of PVAc, and molecular weights of PVAc and resulting poly(vinyl alcohol) (PVA) obtained by saponifying with sodium hydroxide. Slower polymerization rate by adopting ACVA and lower viscosity by methanol proved to be efficient in obtaining linear high‐molecular‐weight (HMW) PVAc with high conversion and HMW PVA. PVA having maximum number–average degree of polymerization (P_n) of 4300 could be prepared by the saponification of PVAc having maximum P_n of 7900 polymerized using ACVA concentration of 2 × 10^?5 mol/mol of VAc at 40°C. Moreover, low DB of below 1 could be obtained in ACVA system, nevertheless of general polymerization temperatures of 40°C and 50°C. This suggests an easy way for producing HMW PVA with high yield by conventional solution polymerization without using special methods such as low‐temperature cooling or irradiation. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 4831–4834, 2006     

Preparation of hydroxyapatite/poly(vinyl alcohol) composite film with uniformly dispersed hydroxyapatite particles using citric acid

Biocompatible hydroxyapatite (HA)/poly(vinyl alcohol) (PVA) composites and their transparent films were prepared by the coprecipitation and solvent casting method. The formation of HA in PVA composite powder was confirmed by the characteristic phosphate bands at 1100–1032 and 565 cm^?1 at FT‐IR spectra, and the weight ratio of HA to PVA was 50/50 examined by TGA. The crystal melting temperature of HA/PVA decreased compared with that of pure PVA. HA/PVA (50/50) composite powder and pure PVA were dissolved in dimethyl sulfoxide to obtain a film with HA/PVA weight ratio of 10/90. To improve HA particles' dispersity, which is one of the major factors affecting the mechanical properties of composite materials, various contents of citric acid were used for the preparation of HA/PVA films. At a citric acid concentration of 5 wt %, HA/PVA film with good dispersity of HA particles was obtained. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007