Java语言及其虚拟机技术探讨

随着Internet的迅猛发展，Internet编程语言Java愈来愈成为计算机行业的焦点。本文在简述了Java的主要特点后，重点对Java最关键的技术──虚拟机进行了深入的探讨。     

实时跟踪控制系统中的数字滤波技术

在高精度的实时跟踪控制系统中，由探测器等其他一些因素给系统带来的噪声将不容忽视，数字滤波将是滤除噪声的有效手段，，由于系统实时性和采样频率的要求，本文介绍几种时跟踪系统中常用的数字滤波方法，并对它们在实时跟踪系统中的作用进行了和比较。     

Mapping field density distribution in radiators by microwave noise

In his earlier paper on Active Microwave Radiometry, the author indicated that microwave noise can be used to map field density distribution inside radiators and in antenna systems, without the need for anechoic chambers. The presented paper gives details and results of such experiment. The method is described, details of equipment are given and results are presented with a concluding commentary.     

CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

对聚合物驱单井效果评价的几点认识

通过对喇嘛甸油田聚合物驱单井效果分析，给出了采油井阶段效果评价方法，即单井见效时间和含水回升时间早晚的确定方法，单井见效时间取决于油层条件，注聚前含油饱和度及累计采出地下体积倍数，单井含水回升时间主要取决于聚驱阶段剩余储量采出程度，根据单井阶段评价结果，对试验区进行跟踪调整，在单井阶段效果评价的基础上，对单井最终效果采用吨聚增油量和聚驱阶段剩余储量采收率来进行客观，有效的评价，对聚驱产量预测具有一定指导意义。     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

用熵方程证明全不可逆循环揭示的Clausius方程式

利用不可逆循环图代替传统的半不可逆循环推导出Clausius积分式，并用熵方程证明之，得出可逆过程膨胀功大于不可逆过程膨胀功。     

低温下液体饱和蒸气压的测试

着重介绍了静态法测试低温下（－１００～５０℃）液体饱和蒸气压的原理及方法，给出了低温下液体全氟三乙胺饱和蒸气压的测试结果，并进行了讨论。     

用射频化学气相沉积法制备p型微晶金刚石薄膜

利用射频化学气相沉积法，通过硼的掺杂，在石英玻璃衬底上生长出Ｐ型微晶金刚石薄膜，范德堡法的测试表明，我们得到的薄膜最小电阻率为４×１０－２Ω．ｃｍ，最大空穴迁移率为５０ｃｍ／Ｖ．ｓ；从电阻率与温度关系近似计算出杂质激活能     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.