Correlation between growth behavior,internal stress distribution and properties of ZnO:Zn crystals grown by carbon-assisted chemical vapor transport

Internal stress and stress-related defects are considered as the major obstacles that significantly hinder the growth of high-quality ZnO-based crystals. In this work, high-crystalline-quality ZnO:Zn bulk crystals were successfully grown by carbon-assisted chemical vapor transport (CVT). Internal stress in the crystal was directly measured by a neutron beam from a reactor, and stress distributions along the radial direction at different depths were obtained. The stress, temperature, and flow fields in the growth system were simulated by the finite element (FE) method, and the results agreed with the neutron stress analysis. The etch pit density (EPD), Hall properties, and optical transmittances of different crystal regions were studied in detail, and the distribution trend of the crystal properties was consistent with that of internal stress and stress-related defects in the crystal. It is found that the unique temperature filed in the growth system causes the crystal to bend to a slightly convex toward the growth direction and gives rise to a driving force for structural defect formation. The + c and –c faces of the crystal are subjected to tensile and compressive stress, respectively. The maximum stress values are about 280 MPa and -291 MPa near the central regions of ±c faces, while the crystal periphery is basically free of internal stress. The region near the center of +c face has an EPD of 7.5 × 10³ cm^-2 and a transmittance of 79.2% at 800 nm wavelength, while the corresponding carrier concentration and mobility are 2.27 × 10¹⁷ cm^?3 and 159 cm²/V·s, respectively. By comparison, the crystal periphery has an EPD of 10² cm^-2 with an 80.5% transmittance at 800 nm, while the carrier concentration and mobility are 1.85 × 10¹⁷ cm^?3 and 184 cm²/V·s, respectively.     

Demand aware transmission power cost optimization based on game theory and distributed learning algorithm for wireless body area network

Wireless Networks - This paper studied the issue of communication transmission power cost optimization for the personal body base station in wireless body area network (WBAN). With the limited...     

基于信任链的骚扰电话预判技术研究

当前,骚扰电话乱象屡禁不止,严重影响了人民群众的正常生活,甚至威胁到个人财产安全,因此简单有效地识别骚扰电话技术成为亟待解决的问题。区别于现有的对电话号码进行黑白名单标记、大数据分析等识别方法,提出基于信任链的骚扰电话预判技术,从可信度量的角度计算来电号码的可靠程度,并针对高危受害群体的典型应用场景进行分析,通过对骚扰电话的预判,降低其受到电话骚扰甚至电话诈骗的可能性。     

Anatase/rutile-TiO2 hollow hierarchical architecture modified by SnO2 toward efficient lithium storage

Hierarchical architecture of anatase/rutile-mixed phases TiO₂ with hollow interior was successfully fabricated via a Topotactic synthetic method, including the synthesis of CaTiO₃ precursors and transforming them into TiO₂ through ion-exchange process. The as-synthesized TiO₂ hierarchical architectures as the anode materials were used as lithium-ion batteries (LIBs). Compared with TiO₂ samples, the TiO₂@SnO₂-5% shows the improved lithium storage capacity, cycling performance and rate properties. The impedance of the TiO₂ electrode decreases evidently after adding few amount of SnO₂. The hollow hierarchical structure with different compositions provide much more active sites, and well connect interface among anatase, rutile, and SnO₂, facilitating the electron and ion transport quickly and efficiently. Addition appropriate number of SnO₂ not only well kept the hierarchical architecture but also enhanced the capacity and conductivity of the TiO₂ sample. As a result, TiO₂@SnO₂-5% exhibited excellent lithium storage performance.     

基于内隐测量的APP交互流程可用性评估方法

目的 研究内隐测量用于交互流程评估的普遍方法，选取适合的参考指标建立评估标准，旨在提出一套完整且通用的评估策略。方法 以带有拍摄功能的宠物社交类APP为载体，提出两种不同的交互流程，建立交互原型，并提取两套原型中差异较大的流程进行对比实验，采用眼动仪收集被测的无意识行为，依据首次注视时间、兴趣区域注视率，注视点图等指标分析实验数据，并与外显测量结果相结合，衡量用户操作情况以及APP的交互性能。结果 根据实验和数据分析，得出以拍摄界面为主页是更适合宠物社交APP的交互方式。结论 内隐测量评估作为一种新兴的产品可用性评估方式，不仅在交互界面设计评估上得到了广泛的应用，还可作为产品交互流程的评估方法，并具有深度挖掘的意义。     

用于热密封组件的编织弹簧弹性性能分析

针对耐高温动态热密封组件中的常用元件弹性支架编织弹簧,研究了其压缩率、装配方式、热暴露温度等参数对其弹性性能的影响,并讨论了编织弹簧高温弹性失效的原因。研究结果表明,合金的氧化是编织弹簧高温回弹率降低的主要原因,在温度低于800℃、压缩率小于50%的服役条件下,编织弹簧的回弹率不小于95%,在航天热密封领域有广阔的应用前景。