9．5－32mm波段大气衰减随仰角变化的实验研究

在实测和分析３２、１４．６、１２．５和９．５ｍｍ波段大气衰减的基础上，研究了大气衰减随仰角变化的规律；讨论了仰角为３～９０°时计算大气衰减的简化计算公式；给出了大气等效高度与地面水汽密度的关系式，对大气衰减和等效高度的实测值与理论值进行了比较和分析．     

薄膜微型电源

介绍了新型的薄膜微型电源的工作原理、结构及制造工艺。     

STN—LCD的新进展

STN-LCD采用新的取向层,消除了残象;采用新的驱动波形,消除了串扰;采用二(口恶)烷、卤化物、链烯基、醚和二苯乙炔,改进了液晶料材的性能,使STN-LCD获得高的对比度、快的响应速度、低的驱动电压;采用有源矩阵驱动方法,消除了帧响应,使STN-LCD获得高的对比度、高的亮度及视频响应速度;使用温度跟踪电路,自动跟踪STN-LCD的阀值电压,使STN-LCD获得宽的工作温度。     

Ductile Phase Toughened Brittle Materials

Toughening of brittle materials by the inclusion of ductile phases is governed by several important factors which include ceramic-ductile phase interfacial bond strength, physical and chemical compatibility between ceramic and ductile phase, geometry and mechanical properties of ductile phase. The present understanding of the effect of these factors on toughening is reviewed and clarified. Continuous ductile phases (network, fibre or plate) are found to be more efficient for the toughening of brittle materials than discrete ductile particles. However, ductile particle toughened brittle materials have the advantages of material homogeneity isotropy and particularly better high temperature properties. It has been demonstrated that the influence of interfacial bond strength is determined by the geometry of the ductile phase in the composites. For the comparatively continuous ductile phase, such as ductile network, fibre or plate, comparatively weak inteffocial bond strength can promote partial debonding of the brittle matrix-ductile phase intedece during crack propagation and is beneficial for toughening. For discrete particulate ductile phase toughened brittle materials, the small gauge length of the ductile phase often results in the ductile phase pull-out during crack propagation which is the main limitation to toughening.Thus strong bond strength is required to ensure the bridging of the crack by the ductile phase.The coefficient of thermal expansion (CTE) mismatch between matrix and ductile phase has also been correlated with the geometry of the ductile phase. In most of the ceramic/metal systems,the CTE of the ductile metal phase is greater than that of the ceramic matrix. In the case of ductile network, fibre or plate, the residual stress created by the CTE mismatch can contribute to toughening through its influence on the initial crack opening stress while the bridging of the crack by the ductile phase is still ensured. However, for discrete ductile particles, the residual stress created by CTE mismatch is liable to cause cracks to by-pass the spherical particles, limiting the efficient use of the inherent toughness of the ductile phase. Low-modulus ductile inclusions are beneficial for the bridging of cracks by the ductile phase. Softer, more ductile inclusions are more effective for the toughening of brittle materials by particulate ductile phase     

氧化锌压敏陶瓷烧结致密化过程的研究

本文研究了氧化锌压敏陶瓷的致密化过程，结果发现只有当烧结温度升高到一定值时，试样中的ＺｎＯ粉粒产生聚集，致密化过程才开始．致密化是瓷体获得稳定电性能的基础．低熔点添加剂Ｂ２Ｏ３可以降低致密化的起始温度，而致密化过程中的等温烧结对ＺｎＯ压敏陶瓷的最大密度几乎没有影响．     

铸件浸渗系统脱液机故障树的建立和分析

利用FTA方法对脱液机的各种故障进行系统分析,建立了脱液机的故障树,并对故障树进行定性分析.找出了影响脱液机可靠性的主要因素,提出了提高脱液机可靠性的相应措施.     

SNCP环带链的组网与维护

在实际传输网络结构中,有些站点由于条件限制不能与其它站点连接成环.过去采用通道保护(PP)环带链组网,环链网元间业务在环上没有保护;随着技术的发展,提出了子网连接保护(SNCP)环带链组网方式,确保环链网元间业务在环上得到保护,使网络的稳定性和可靠性大大提高.     

装备工作性能模糊评判新方法

阐述了虚拟样机技术的优越性及其在机械系统研究领域应用中的必要性,总结了火炮可靠和安全工作的三个基本准则.将模糊的观点引入到火炮研究领域,定义了单因素与火炮工作性能等级间的隶属度函数,建立了基于虚拟样机的火炮工作性能模糊综合评判模型.     

无线局域网中基于RC4的加密算法的分析与改进

分析RC4加密算法自身的缺陷和无线局域网WEP协议对RC4的误用,介绍了TKIP协议在安全性方面的改进。     

Al-Cu-Fe系初生准晶相凝固过程的电子显微分析

采用包括金相（OM），粉末X射线衍射（XRD），扫描电子显微镜（SEM）观察和透射电子显微（TEM）分析等方法，研究了铸态Al592.Cu36.8Fe3.0Si1.0合金（700℃保温2．5h后水淬）的显微组织及相组成。发现铸锭中存在4种相：准晶I相，τ3相（或φ相），θ－Al2Cu相和η－AlCu相，凝固过程可描述为：初生晶是准晶Ⅰ相；在保温过程中发生包晶或共晶反应（L＋i→τ3(或φ）或L→τ3（或φ）＋i)形成的τ3相（或φ相），呈微畴结构；而剩余液体水淬形成θ－Al2Cu相和η－AlCu 相。