A Finite Element Modeling for Dilatometric Nonisotropy in Steel

It is well known that nonisotropic volume changes in dilatometry were observed during the phase transformation in steel. In this study, a finite element (FE) model incorporating the transformation plasticity was adopted to describe the nonisotropic dilatometric behavior during the phase transformation in steel. An implicit numerical solution procedure to calculate the deformation during the dilatometric experiment was incorporated into the general purpose implicit FE program. The nonisotropic dilatometric behavior could be successfully reproduced by using the FE simulation considering the transformation plasticity. The transformation plasticity was caused by the small amount of stress that naturally developed in the specimen during the dilatometric experiment. In conventional low carbon steel, the stress in the specimen mainly forms due to the very small external force supplied to support it during the dilatometric experiment. As regards ultralow carbon steel, whose phase transformation occurs within an extraordinarily narrow temperature range, the inhomogeneous phase transformation due to the temperature deviation in the specimen was mainly responsible for the stress field in the specimen during the dilatometric experiment.     

A novel method of making PVF porous foam without using the pore forming agent

Different with the conventional method of manufacturing poly(vinyl formal) (PVF) porous foam by using the pore‐forming agents such as wheat or potato starches, a novel method without using the pore‐forming agent is introduced in this article. Through the help of images taken by a scanning electron microscope, the formation process of the present PVF foam will be discussed in terms of the spinodal decomposition (SD) phase separation principle. Additionally, the effect of poly(vinyl alcohol) concentration and reaction temperature on the pore structure of the PVF foam will be investigated. Moreover, the water adsorption capacities of the PVF foams obtained by the present method will be studied in details through the analyses of pore‐size distribution, mechanical modulus, and thermal property. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41270.     

Effects of ginsenosides on regulatory T cell differentiation

Food Science and Biotechnology - Regulatory T cells (Treg cells) are a subpopulation of T cells defined as CD4+Foxp3+CD25+. They mainly function as immunosuppressive T cells by downregulating the...     

A microfluidic gel valve device using reversible sol–gel transition of methyl cellulose for biomedical application

We have fabricated a microfluidic gel valve device that used reversible sol–gel transition of methyl cellulose (MC). A microheater and a microtemperature sensor were implemented in each microchannel in the gel valve device. Before evaluating the performance of the gel valve device, various properties of the MC solution were investigated using viscometer, spectrophotometer, and NMR. Gelation temperature was increased as the MC concentration was increased. Clear gel, an intermediate state between clear sol and turbid gel, was found at the temperature range from 30–40°C to 50–60°C. Temperature at each microchannel of the device was measured and the effect of the temperature difference on the valve operation was elucidated. In order to have normal operation of the gel valve, it was important to keep the temperature of the heated microchannel around 60°C while keeping the temperature of the flowing microchannel below 35°C. The temperature difference between two microchannels was about 23 K when fan forced cooling (FFC) method was used. For normal performance of the gel valve device, a temporary pause of fluid flow for at least 5 s was required to complete the local gelation in the microchannel. Stable gel valve performance was obtained at the flow rates larger than 5 μl/min. The gel valve device showed no leakage up to 2.07×10⁴ Pa.     

Treatment of strong nitrogen swine wastewater in a full-scale sequencing batch reactor.

Treatment of swine wastewater containing strong nitrogen was attempted in a full-scale SBR. The strongest swine wastewater was discharged from a slurry-type barn and called swine-slurry wastewater (SSW). Slightly weaker wastewater was produced from a scraper-type barn and called swine-urine wastewater (SUW). TCOD, NH4+-N and TSS in raw SSW were 23,000-72,000 mg/L, 3,500-6,000 mg/L and 17,000-50,000 mg/L, respectively. A whole cycle of SBR consists of 4 sub-cycles with anoxic period of 1 hr and aerobic period of 3 hr. The maximum loading rates of both digested-SSW and SUW were similar to 0.22 kg NH4+-N/m3/day whereas the maximum loading rates of raw SSW was up to 0.35 TN/m3/day on keeping the effluent quality of 60 TN mg/l. The VFAs portion of SCOD in raw SSW was about more than 60%. The VFAs in SUW and digested-SSW were about 22% and 15%, respectively. NH4+-N and PO4(3-)-P in SSW were removed efficiently compared to those in digested-SSW and DUW because SSW had high a C/N ratio and readily biodegradable organic. High concentration of organic was useful to enhance denitrification and P uptake. Also the amount of external carbon for denitrification was reduced to 5% and 10% of those for digested-SSW and SUW.     

Experimental study of miniaturized tip test

A tip test was developed and used successfully for friction measurement between the billet and dies or punches for the cold forging process. In the present investigation, the test was downsized and experimentally investigated to find the size effect on test results. For the test, aluminum alloys of 2024-O and 6061-O were used and the specimen was made into a cylinder of diameter and height of 10.0mm and 5.0mm, respectively. For lubrications, VG32, VG100, grease, and corn oil were used in experiments and tests were also carried out with two different humidity conditions. A micro-hardness test was made to compare the hardness distribution with the strain distribution obtained from the finite element simulation. The load levels and tip distances were measured for Al6061-O specimen with various lubrication conditions and compared to each other to find any correlation between the two. The shear friction factors were determined for various lubrications by using the finite element simulation under the present condition.     

Optimizing the binary discriminant function in change detection applications

Binary discriminant functions are often used to identify changed area through time in remote sensing change detection studies. Traditionally, a single change-enhanced image has been used to optimize the binary discriminant function with a few (e.g., 5-10) discrete thresholds using a trial-and-error method. Im et al. [Im, J., Rhee, J., Jensen, J. R., & Hodgson, M. E. (2007). An automated binary change detection model using a calibration approach. Remote Sensing of Environment, 106, 89-105] developed an automated calibration model for optimizing the binary discriminant function by autonomously testing thousands of thresholds. However, the automated model may be time-consuming especially when multiple change-enhanced images are used as inputs together since the model is based on an exhaustive search technique. This paper describes the development of a computationally efficient search technique for identifying optimum threshold(s) in a remote sensing spectral search space. The new algorithm is based on “systematic searching.” Two additional heuristic optimization algorithms (i.e., hill climbing, simulated annealing) were examined for comparison. A case study using QuickBird and IKONOS satellite imagery was performed to evaluate the effectiveness of the proposed algorithm. The proposed systematic search technique reduced the processing time required to identify the optimum binary discriminate function without decreasing accuracy. The other two optimizing search algorithms also reduced the processing time but failed to detect a global maxima for some spectral features.     

Reaction properties and interfacial intermetallics for Sn−xAg−0.5Cu solders as a function of Ag content

Wetting and interfacial reactions were investigated for Sn−xAg−0.5Cu alloys, in which the Ag content had a variation from x=1.0 to x=4.0. Differential scanning calorimetry (DSC) was used to investigate the range of the melting temperature and the solidification temperature by measuring the endothermic and the exothermic heat flow, respectively. Low Ag contents increased the melting temperature ranges and deteriorated the wetting properties such as zero cross time and wetting force measured at two seconds. The extent of undercooling increased and the thickness of intermetallic compounds (IMC) decreased as the Ag content decreased. As the Ag content decreased, the initial IMC thickness decreased due to the large undercooling and, during the solid aging at 170°C, the IMC growth slightly decelerated because of the small diffusion coefficient. For the application of good drop shock reliability, Sn−Ag−Cu solder of low Ag content should be beneficial due to the restraint of the IMC growth (Cu₆Sn₅ and Cu₃Sn) and of the coarse plate-like IMC (Ag₃Sn).     

GPR55 Antagonist CID16020046 Protects against Atherosclerosis Development in Mice by Inhibiting Monocyte Adhesion and Mac-1 Expression

GPR55 recognizes several lipid molecules such as lysophosphatidylinositol. GPR55 expression was reported in human monocytes. However, its role in monocyte adhesion and atherosclerosis development has not been studied. The role of GPR55 in monocyte adhesion and atherosclerosis development was investigated in human THP-1 monocytes and ApoE^−/− mice using O-1602 (a potent agonist of GPR55) and CID16020046 (a specific GPR55 antagonist). O-1602 treatment significantly increased monocyte adhesion to human umbilical vein endothelial cells, and the O-1602-induced adhesion was inhibited by treatment with CID16020046. O-1602 induced the expression of Mac-1 adhesion molecules, whereas CID16020046 inhibited this induction. Analysis of the promoter region of Mac-1 elucidated the binding sites of AP-1 and NF-κB between nucleotides −750 and −503 as GPR55 responsive elements. O-1602 induction of Mac-1 was found to be dependent on the signaling components of GPR55, that is, Gq protein, Ca²⁺, CaMKK, and PI3K. In Apo^−/− mice, administration of CID16020046 ameliorated high-fat diet-induced atherosclerosis development. These results suggest that high-fat diet-induced GPR55 activation leads to the adhesion of monocytes to endothelial cells via induction of Mac-1, and CID16020046 blockage of GPR55 could suppress monocyte adhesion to vascular endothelial cells through suppression of Mac-1 expression, leading to protection against the development of atherosclerosis.     

Synthesis and In Vitro Properties of Dexamethasone 21-Sulfate Sodium as a Colon-Specific Prodrug of Dexamethasone

ABSTRACT

We synthesized dexamethasone 21-sulfate sodium (DS) as a colon-specific prodrug of dexamethasone and investigated its properties. Introduction of a sulfate group to dexamethasone lowered the apparent partition coefficient from 52.5 to 0.27 in 1-octanol/pH 6.8 phosphate buffer at 37°C. DS was stable on incubation with buffer solutions of varied pH or with the upper intestinal contents of rats at 37°C for 24 h. On incubation with the cecal contents, DS was hydrolyzed by producing dexamethasone over 80% of the dose at 10 h. When DS was incubated with the cecal contents collected from trinitrobenzenesulfonic acid (TNBS)-induced colitic rats, the degree of prodrug hydrolysis and production of dexamethasone amounted to 70% of healthy rats. In comparison with prednisolone, hydrocortisone, and cortisone, dexamethasone was stable against bioinactivation by the cecal contents, a desirable property for the development of a colon-specific prodrug. These results demonstrated that DS might be delivered specifically to the colon as an intact form to produce dexamethasone in high yield, suggesting DS as a potential colon-specific prodrug of dexamethasone.