Optical properties of amorphous carbon thin films prepared by plasma deposition in a graphite hollow cathode

Carbon films have been produced using a graphite hollow cathode and an r.f. plasma of hydrogen or hydrogen and argon. No hydrocarbon gas was used. The films were subjected to heat treatments up to 700 °C in air. The optical properties of the films were studied using Fourier transform IR, UV-visible, Raman, ellipsometry and photoluminescence techniques before and after the annealing. Films prepared without argon have a narrower band gap and a different photoluminescence response from films prepared with argon. The index of refraction was seen to have values between 1.7 and 2.2 depending on the preparation conditions. The optical band gap of the films was generally greater than 2 eV and the annealing process both increased the gap and reduced the density of states responsible for the large photoluminescence signal.     

Multihour engineering and traffic routing optimization in hierarchical telephone networks

Classical hierarchical routing in telephone networks is extended to a wider class called out-of-chain routing in such a way that some useful properties of hierarchical routing are retained. This new routing pattern offers more potential paths than the fixed hierarchical one and can be introduced as a dynamic routing where the fixed alternate sequences change at some predetermined instants during the day. The effect of this new routing pattern on the network performances is examined. The main topic of this paper is to present heuristic methods used to optimise such routings in large networks. We show on artificial networks that the throughput of a given network can be significantly improved by suitable routing choices. We demonstrate that the integration of routing changes within a multihour dimensioning process is possible but the lack of realistic data does not permit at this time to quantify the value of routing optimization on real networks.     

Determining the Tensile Stress-Crack Opening Curve of Concrete by Inverse Analysis

The determination of the fundamental stress versus crack opening (σ-w) response of concrete under uniaxial tension is performed in this study through inverse analysis using data from notched beam tests. The procedure used for optimizing the parameters of the σ-w relation using the load versus crack mouth opening displacement response of the notched beam is described. Satisfactory comparisons have been obtained between the σ-w curves obtained through the inverse analysis and those directly measured in uniaxial tension tests. The use of weighting functions in the inverse analysis may be necessary when large crack widths are to be considered.     

Electrodeposition of yellow bronze from acidic sulfate baths containing polyether laprol and micromolar additives of halides

The composition of yellow bronze coatings deposited from acidic sulfate solutions added with polyether laprol and the electrodeposition conditions are studied by voltammetry and XPS. It is found that halides in rather low (micromolar) concentrations affect significantly the partial electrodeposition processes. Chlorides increases cathodic polarization, widen the current window of the yellow bronze electrodeposition, and favor the increase in tin content of the coatings. Bromides narrow the current window, lower the tin content in the coatings, and hinder the yellow bronze surface oxidation. Iodides inhibit the copper electroreduction markedly, which makes the yellow bronze deposition practically impossible. Original Russian Text ? Z. Mockus, S. Kanapeckaité, V. Jasulaitiené, A. Survila, 2006, published in Zashchita Metallov, 2006, Vol. 42, No. 5, pp. 526–531.     

Chromosome comparison between populations of the collared peccary, Tayassu tajacu, raised in captivity

The collared peccary (Tayassu tajacu) is widely distributed over the American continent, being found from the south of the USA to the north of Argentina. In Brazil, it is spread all over the country, being one of the potential species to be raised in captivity. Therefore, the cytogenetic techniques could be a potential tool for reproductive monitoring of animals raised in captivity, mainly when destined for commercial purposes. This study had the objective of determining the chromosome number of two populations raised in captivity and characterizing them by GTG banding. For this purpose, an analysis was made of mitotic metaphases obtained from lymphocyte cultures made from blood samples of 11 animals, six of which from the Northeast and five from the North of Brazil. The results of this analysis showed the same karyotype pattern for the species (2n=30 chromosomes and NF=48), besides corresponding to the South American pattern of the species, i.e., without a translocation between autosomes 1 and 8, chromosome X acrocentric, and no differences were found between the two populations studied. However, chromosomal polymorphisms were observed compared to data from the literature on populations from North and South America.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.