Biodiesel production from waste coconut oil by esterification with ethanol: The effect of water removal by adsorption

The production of biodiesel by esterification with ethanol using waste oil generated in the refining of coconut oil was investigated in this study. The reaction was performed with and without adsorption of water in order to verify the effect of removing water on the reaction conversion. Methanol was also evaluated as an esterification agent. For both ethanol and methanol, conversions over 99% mol were observed. Simultaneous water adsorption allowed the use of lower alcohol/oil molar ratios thus enabling better economics to a possible industrial process.     

Influence of the final ethanol concentration on the acetification and production rate in the wine vinegar process

BACKGROUND: The acetification process needs an overall study of the variables influencing it in order to establish their optimum values. Based on industrial experience and available literature, including a recently proposed model by the authors, among the variables most strongly influencing the acetification process are the ethanol concentration at the time the reactor is unloaded, the unloaded volume and the loading rate. To ensure economically efficient industrial production of vinegar, and to check the predictions of the aforementioned model, the influence of the final ethanol concentration at unloading time on the mean acetification rate and on productivity has been studied in this work. RESULTS: An increase in the final ethanol concentration from 0.5 to 3.5% (v/v) increased the mean overall acetification rate and acetic acid production by 38 and 26%, respectively. The increase was established mainly during the loading phase. CONCLUSIONS: The final ethanol concentration is a key variable for process optimization. If a high rate is desired then a product containing much unused substrate will be obtained, which may be industrially unacceptable. These results suggest the necessity to investigate other possibilities when high values for yield and productivity must to be achieved. Copyright © 2010 Society of Chemical Industry     

Uptake of Tritiated Liquids by Individual Breakfast Cereal Flakes

ABSTRACT: Surface liquid adhesion (SLA) and liquid absorption (LA) of tritiated liquids, including water and skim, low-fat, whole, and fat-enriched milks, by cornflakes (CF) and frosted flakes (FF) were determined by scintillation counting using water-[³H] at 0.5 μCi/mL. SLA or the liquid adhering to individual flakes after a short immersion period was the same for CF and FF in the case of water (approximately 0.011 μL mm⁻² of flake) but were always higher for CF than for FF and increased as the fat content in milks augmented. LA of individual flakes, followed for 300 s of soaking, increased with time and was always higher for CF than for FF (for the same liquid), however, data did not follow a regular pattern. Flakes showed quite compact outer surfaces and an internal porous matrix composed of air cells of various sizes separated by dense walls of different thicknesses. This heterogeneous microstructure of individual flakes may be the cause of the lack of a simple kinetics during the soaking process. Previous results obtained by soaking a mass of flakes overestimated the uptake of fluid by individual because they included the liquid occluded between the flakes.     

Formulation and characterization of leather and rubber wastes composites

Residues from footwear roughing and carding operations represent 5–15% (w/w) of the solid wastes generated by shoe‐making companies. These wastes are mainly composed by chromium tanned leather and sole materials, and are mostly land filled. Sometimes leaching tests show these wastes as hazardous due to chromium in the leachate. This work aims at a more sustainable option for these wastes by recycling them in styrene butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR). Thus, they were charged with: (i) ≤1 mm leather waste fibers in the range of 10–25 parts per hundred parts of rubber (phr); and (ii) leather and soles industrial carding and roughing wastes in the range of 20–100 phr. The leather waste fibers‐rubber composites tear strength is increased till 25 phr and both tension and elongation at break decrease within the acceptable range till 12.5 phr for SBR and 15 phr for NBR. In the case of leather and sole carding and roughing wastes, composites tear strength increases till 100 phr, and tension and elongation decrease within the acceptable range till 20 phr. The composite materials at the end of their life cycle may be considered inert or non‐hazardous wastes. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Air Quality Monitoring Network Design to Control Nitrogen Dioxide and Ozone,Applied in Granada,Spain

This paper describes a method to design air quality monitoring networks for nitrogen dioxide and ozone and its application in Granada, a city located in Andalusia, southern Spain. The city has a population of 236,988 inhabitants, and traffic is its main source of air pollution. Sampling campaigns with passive diffusion samplers at 88 sites were carried out to obtain information on the pollution distribution in Granada. The average concentrations found for NO₂ and O₃ were 36.5 μg/m³ and 51.6 μg/m³, respectively. Maximum values of up to 57.1 μg/m³ NO₂ were found in Granada city center and O₃ reached 77.2 μg/m³ downwind from the emission source. After spatial interpolation of the obtained values with Geographical Information Systems, a selection of the best locations for the monitoring stations was made, in line with the macro- and microscale siting requirements of the European Directive 2008/50/EC on ambient air quality and cleaner air for Europe. Another sampling campaign with diffusive samplers was carried out in 2007 to determine if the locations of the air quality assessment stations were still representative for their zone. A correction was made in the control network following results of this verification campaign.     

Parameter identification and shape optimization

Simulation of metal forming processes using the Finite Element Method (FEM) is a well established procedure, being nowadays possible to develop alternative approaches, such as inverse methodologies, in solving complex problems. In the present paper, two types of inverse approaches will be discussed, namely the parameter identification and the shape optimization problems. The aim of the former is to evaluate the input parameters for material constitutive models that would lead to the most accurate set of results respecting physical experiments. The second category involves determining the initial geometry of a given specimen leading to a desired final geometry after the forming process. The purpose of the present work is then to formulate these inverse problems as optimization problems, introducing a straightforward methodology of process optimization in engineering applications such as metal forming and structural analysis. To reach this goal, an integrated optimization approach, using a finite element code together with a numerical optimization program, was employed. A gradient-based optimization method, as a combination of the steepest-descent method and the Levenberg-Marquardt techniques, was used. Numerical applications in the parameter optimization category include, namely, the characterization of a non-linear elasto-plastic hardening model and the determination of the parameters for a nonlinear hyperelastic model. It is also discussed the simultaneous identification of both constitutive material model parameters and the friction coefficient parameters. From the point of view of shape optimization problems, the determination of the initial geometry of a specimen in a upsetting billing problem as well as a methodology for defining the most suited blank shape to be formed in a square cup, are discussed. The final results for both categories show that this kind of algorithms have great potential for future developments in more demanding and realistic benchmarks. It is also worth noting that the presented integrated methodology can be easily applied to a first introduction of optimization techniques and numerical simulation to undergraduate courses in engineering.     

Variability of Phytosterols in Jatropha curcas Germplasm

Jatropha curcas L. has great potential for biofuel and phytosterol production. The objective of this research was to evaluate G × E variability for kernel phytosterol content and composition in Jatropha germplasm. Freshly matured seeds from 21 accessions grown in Málaga, Spain were collected at two stages of development. Significant genetic variation was detected for total kernel phytosterol content, which ranged from 2,246 to 2,883 mg kg^?1; and stigmasterol concentration, which ranged from 7.6 to 11.5 % of the total phytosterols. An accession with 9.2 % Δ⁵‐avenasterol was also identified. The coefficient of variation for kernel phytosterol content and stigmasterol concentration was 6.2 and 14.0 % respectively between accessions and 7.2 and 10.2 % respectively within accessions. Accordingly, evaluation of plant to plant variation is advisable. The existence of variability for kernel phytosterol content and composition in Jatropha will enable breeding for enhanced levels of these compounds.     

Synthesis of vaterite CaCO3 as submicron and nanosized particles using inorganic precursors and sucrose in aqueous medium

It is reported the synthesis of CaCO₃ vaterite as stable nanoparticles and submicron-sized by a simple and relatively rapid procedure. XRD, SEM and FTIR techniques have been used to characterize the precipitated products. The synthesis is based on chemical precipitation of inorganic salt precursors, calcium nitrate tetrahydrate and sodium bicarbonate, and using the disaccharide sucrose as an additive in aqueous medium. The role of the disaccharide sucrose is to control the vaterite precipitation after nucleation and growth. It has been found that an increase in sugar concentration promotes the crystal precipitation of vaterite with spherulitic morphology, as revealed by SEM, and changed the surface of the precipitated particles. There is a significant difference between CaCO₃ precipitation in the absence and presence of sucrose. Addition of 0% of sucrose leads to 83% of calcite as identified by XRD methods. In contrast, addition of 67% of sucrose in aqueous medium produces 100% vaterite. The present results may be useful to provide a quick, simple, inexpensive and novel method for the controlled synthesis of new advanced biomaterials based on vaterite particles without hazardous chemicals and inert atmosphere, with great possibilities for industrial scale production.     

Propellant cohesive fracture during the peel test of a propellant/liner structure

The integrity of propellant/liner structures in rocket motors is critical to ensure controlled combustion of the engine. In an effort to improve the bonding between the liner and the propellant, it is necessary to characterize it well. Therefore, a propellant–liner structure, bounded thanks to co-curing, has been submitted to a peel test while recording the macroscopic fracture energy and the local displacement field on the propellant-free surface. The experimental setup includes two cameras in order to record the displacement field on the propellant-free surface. Upon loading, the peel force stabilizes quickly due to a cohesive fracture in the propellant, providing access to the fracture energy. While the crack propagates through the propellant, it is observed that only a small localized area is submitted to strain, and most of the structure remains unstrained.     

Taking back the power: an analysis of Black women’s communicative resistance

Black women are a structurally oppressed group in a subordinate position in the power hierarchy. Language is an important demonstration of group identity and is used to manage the day-to-day realities of being both Black and women. Scholars have devoted attention to explaining why Black women’s discursive practices are a function of their particular vantage point and can serve as a measure of protection against social and political hostilities. While there is a great deal of research acknowledging Black women’s ability to resist, the work can be extended by analyzing the specific resistance strategies Black women employ in common social environments. This essay uses Black/feminist standpoint and power and discourse frameworks to analyze Black women’s communicative resistance across three communication contexts: (1) education, (2) workplace, and (3) personal relationships.