Comments on “A novel dead time compensator for stable processes with long dead times” [Journal of Process Control 22 (2012) 612–625]

This short communication analyzes the results recently presented in the paper “On a novel dead time compensator for stable processes with long dead times” published in the Journal of Process Control. In the mentioned paper it is argued that the proposed strategy, called modified Smith predictor (MSP), gives better performance than the filtered Smith predictor (FSP) dead-time compensator for stable processes with dead time. In fact MSP has the same structure as FSP and only some specific tuning rules of the filters are proposed. Therefore, in this work some aspects of the comparative analysis and tuning rules presented in the referred paper are discussed to show that MSP is a particular case of FSP and that for some particular cases its tuning rule does not allow for a good closed-loop response. Some simulation case studies are used to illustrate these aspects.     

Applying EuroWordNet to Cross-Language Text Retrieval

We discuss ways in which EuroWordNet (EWN) can be used in multilingual information retrieval activities, focusing on two approaches to Cross-Language Text Retrieval that use the EWN database as a large-scale multilingual semantic resource. The first approach indexes documents and queries in terms of the EuroWordNet Inter-Lingual-Index, thus turning term weighting and query/document matching into language-independent tasks. The second describes how the information in the EWN database could be integrated with a corpus-based technique, thus allowing retrieval of domain-specific terms that may not be present in our multilingual database. Our objective is to show the potential of EuroWordNet as a promising alternative to existing approaches to Cross-Language Text Retrieval.     

Semi‐Solid Processing of Metal Alloys

Semi‐solid metal casting is an innovative technology for the production of near‐net‐shape parts with demanding mechanical properties. The paper describes different processing routes and materials for semi‐solid‐metal casting (SSM), which have been investigated and also partially developed at the Foundry‐Institute of Aachen University. The standard thixocasting process for aluminium, highly reactive magnesium alloys and steel alloys with high melting points was investigated under variation of a wide range of process parameters. Specially adapted pre‐material production and reheating methods were developed for different materials and their application and future potential is pointed out. The thixocasting experiments were executed on a modified high pressure die‐casting machine with a specially designed “step‐die” providing wall thicknesses from 0.5 to 25 mm. The mechanical properties were tested in dependence of the wall thickness and the metal velocity. The results of these examination show high tensile strength values in combination with very good elongations. The rheocasting process is a new SSM‐forming method with liquid melt as feed‐stock and a high recycling potential. The research results of RCP‐technology (Rheo‐Container‐Process) invented at the Foundry‐Institute and of the Cooling‐Channel‐Process for aluminium and magnesium alloys are promising and are presented in this paper. Studies on semi‐solid processing of magnesium alloys and mixtures of them were conducted by Thixomolding^TM. To establish the most adequate process parameters, the temperature and the mixture relations were varied. Using a mould for tensile test specimens, the mechanical properties and the microstructure evolution could be evaluated. The chemical composition of the different phases was determined using SEM and EDX technologies. Evaluations of the flowing properties were conducted using a spiral mould with a total length of 2m and a cross section of 20mm x 1.5mm.     

A cost-effective heuristic to schedule local and remote memory in cluster computers

Cluster computers represent a cost-effective alternative solution to supercomputers. In these systems, it is common to constrain the memory address space of a given processor to the local motherboard. Constraining the system in this way is much cheaper than using a full-fledged shared memory implementation among motherboards. However, memory usage among motherboards can be unfairly balanced.     

Structural and Magnetic Properties of the New La2SrCo2FeO9 Triple Perovskite

In this work, we report synthesis and characterization of the new La₂SrCo₂FeO₉ triple perovskite material. The samples were produced by the solid-state reaction method. The analyses of the XRD patterns were made by Rietveld refinement through the GSAS code. The results reveal that the material crystallizes in an orthorhombic complex perovskite, space group Immm (#71) with lattice parameters a=5.4314(3) ?, b=5.4583(3) ? and c=7.7018(2) ?. SEM micrographs evidence a strongly diffused granular morphology with mean grain size of 2 μm and the EDX spectra show that the chemical composition of samples are in good agreement with the nominal values of the stoichiometric formula. ⁵⁷Fe Mössbauer spectroscopy recorded at 300 K reveals two sites in concordance with the X-ray diffraction measurements, and its valence state is +3, as determined from the isomer shift found. At 4.2 K magnetic ordering with canting of the Fe moments is found. Measurements of the magnetization as a function of temperature permitted us to determine the ferromagnetic characteristic of material with an effective magnetic moment of 9.7μ _B.     

Ethylene production,respiration and gas exchange modelling in modified atmosphere packaging for banana fruits

A mathematical model was developed from experimental measurements to describe the evolution of the O₂, CO₂ and ethylene in a modified atmosphere packaging system for Cavendish bananas. The respiration and ethylene production in the fruits were experimentally obtained from a closed system method and then represented by Michaelis–Menten equations of enzyme kinetics. The gas transfer through the packaging was described by a Fick's diffusion equation, and the temperature dependence was represented based on the Arrhenius law. The model was validated by packaging the fruit in perforated bags of polypropylene and low density polyethylene at 12 °C for a period of 8 days. With the developed model it was possible to satisfactorily describe the experimental evolution of the gas content in the headspace of the packages, obtaining coefficients of determination (R²) of 0.93 for the O₂ levels, 0.90–0.91 for the CO₂ levels, and 0.89–0.93 for the ethylene levels.     

Application of full-factorial design for optimization of the moisture determination in wheat flour using infrared scales

We studied the parameters that may affect the analysis of the moisture content in wheat flour using infrared scales. The parameters were studied by one-factor at a time methodology and then, by full-factorial design (2³). The best condition using infrared scales occurred at 120 °C, with a sample weight of 1.5 g and an exposure time to infrared radiation of 6 min. We observed the interaction effect between the three factors studied. The analysis time was 60 times lower than classical method. The optimized method for determination of the moisture content in wheat flour using infrared scales was validated to range between 9 and 17 %.     

Numerical simulation and experimental validation of a multi-step deep drawing process

This paper presents the numerical simulation of an industrial multi-step deep drawing process. A large strain finite element formulation including a hyperelastic elastoplastic constitutive model and a contact-friction law is used to this end where the steel sheet material parameters considered in the analysis are previously derived through a characterization procedure of its mechanical response. The numerical predictions of the final shape and thickness distribution of the blank are compared and discussed with available experimental values measured at the end of three successive drawing steps. In addition, a plastic work-based damage index is used to assess failure occurrence during the process. The damage values computed at the end of the drawing process are found to be lower than that corresponding to rupture in the tensile test, considered here as the threshold of failure, confirming, as observed experimentally, that neither fracture nor necking is developed in the blank during the whole drawing process. Finally, the possibility to carry out a reduced two-step drawing process, obtained by merging the second and third steps of the three-step process, is precluded since the damage criterion predicts in this case excessively large values that indicate that failure may occur in specific zones of the sheet.     

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers**

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G’) of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.     

A Non-Invasive Technique for Online Defect Detection on Steel Strip Surfaces

During the production of steel strips, a large amount of surface defects can be generated, due to harsh environmental conditions. A high number of surface defects can lead to rejection by the customer, which represents significant economic losses to the production plant. Thus, it is very important to detect the presence and type of the defects generated during the production of each steel strip. Using this information, it is possible to determine whether a strip is suitable for sale, and it may also be useful to determine the origin of defects and, if possible, prevent them from being generated in subsequent strips. To perform these tasks, non-invasive inspection techniques are usually used, carried out automatically by artificial vision systems. Although the inspection conducted by humans is more accurate, they become fatigued quickly, or may even be unable to carry out the inspection correctly when the forward speed of the strip is high. In this paper, a new detection technique is proposed, based on the division of an image into a set of overlapping areas. The optimum values for the configuration parameters of the detection technique are automatically determined using a genetic algorithm. After the detection phase, all the defects are classified using a neural network. A very satisfactory success rate has been achieved in both detection and classification phases.