New insights on survivability in multi-domain optical networks

With the development of intelligent optical networks and the general multi-protocol label switching (GMPLS) technique, the seamless convergence between IP network and optical network is no longer be a dream but a practical reality. Similar to the Internet, current optical networks have been divided into multiple domains each of which has its own network provider and management policy. Therefore, the development of multi-domain optical networks will be the trend of new-generation intelligent optical networks, and GMPLS-based survivability for multi-domain optical networks will become a hot topic of research in the future. This paper provides a comprehensive review of the existing survivable schemes in multi-domain optical networks and analyzes the shortcomings of current research. Based on previous studies, we present possible challenges and propose new ideas to design efficient survivable schemes to guide the future work of researchers in multi-domain optical networks.     

Modelling the removal of organic vehicle from ceramic or metal mouldings: The effect of gas permeation on the incidence of defects

A shrinking undegraded core and a porous outer layer result, if the organic vehicle used for shaping ceramic or metal powder mouldings recedes in the interparticle space of the moulded body during pyrolysis. In the present work, a numerical model has been used which simulates the undegraded shrinking core situation and quantifies degradation of the organic vehicle and the diffusion of the resulting products in solution in the organic phase during pyrolysis of a ceramic moulding. This model is extended to include gaseous mass transport in the porous outer layer for a moulding in the shape of an infinite cylinder. The effect of resistance to gaseous mass transport in the porous outer region on defects originating in inner regions was estimated. It is shown that the greatest obstruction to mass transport is diffusion of degradation products in solution in the organic phase. However, the permeability coefficient for gas transport in the outer region begins to affect the critical heating rate required for avoidance of defects only when it is less than 10^–15m².Nomenclature C Concentration,C=C (r, t), based on the total volume of ceramic suspension - d Effective molecular diameter of alphamethylstyrene - D Diffusion coefficient,D=D (C, T) - e Porosity of powder - E Activation energy for thermal degradation - h Remaining weight fraction of polymer - H_vap Enthalphy of vaporization - i Node number - I Pre-exponential constant in Equation 13 - j Time step - K _p Permeability coefficient - K ₀ Specific rate constant - m Mass of monomer displaced - M Mass of one alphamethylstyrene molecule - P Monomer vapour pressure - P _s Monomer vapour pressure at outer surface of the cylinder - P ₁ ⁰ Vapour pressure of monomer over its pure liquid - Q Rate of production of monomer, based on the total volume of ceramic suspension - r Radius of the cylinder - r _j Distance from central axis to the inner surface of the porous layer at time stepj - r ₀ Initial radius of the cylinder - R Universal gas constant - S ₀ Specific surface area of powder per unit solid volume - t Time - T Absolute temperature - T _c Temperature at maximum vapour pressure of monomer and atZ _c - V Volume of monomer - V _c Ceramic volume fraction - V _p Polymer volume fraction - w Mass of monomer stored in the porous annulus - Z Heating rate - Z _c Critical heating rate - ₁ Volume fraction of monomer in the polymer-monomer solution - Viscosity of the monomer vapour - _p Density of the polymer - Polymer-monomer interaction constant     

Evaluation Model of Click Rate of Electronic Commerce Advertising Based on Fuzzy Genetic Algorithm

Mobile Networks and Applications - In order to improve the ability of quantitative evaluation of e-commerce advertising click rate, a model of e-commerce advertising click rate evaluation based on...     

Service placement strategy for joint network selection and resource scheduling in edge computing

The Journal of Supercomputing - In the edge computing, service placement refers to the process of installing service platforms, databases, and configuration files corresponding to computing tasks...     

A Survey on Long-Tailed Visual Recognition

The heavy reliance on data is one of the major reasons that currently limit the development of deep learning. Data quality directly dominates the effect of deep learning models, and the long-tailed distribution is one of the factors affecting data quality. The long-tailed phenomenon is prevalent due to the prevalence of power law in nature. In this case, the performance of deep learning models is often dominated by the head classes while the learning of the tail classes is severely underdeveloped. In order to learn adequately for all classes, many researchers have studied and preliminarily addressed the long-tailed problem. In this survey, we focus on the problems caused by long-tailed data distribution, sort out the representative long-tailed visual recognition datasets and summarize some mainstream long-tailed studies. Specifically, we summarize these studies into ten categories from the perspective of representation learning, and outline the highlights and limitations of each category. Besides, we have studied four quantitative metrics for evaluating the imbalance, and suggest using the Gini coefficient to evaluate the long-tailedness of a dataset. Based on the Gini coefficient, we quantitatively study 20 widely-used and large-scale visual datasets proposed in the last decade, and find that the long-tailed phenomenon is widespread and has not been fully studied. Finally, we provide several future directions for the development of long-tailed learning to provide more ideas for readers.

     

Absorption effect in the calculation of a second-order nonlinear coefficient from the data of a maker fringe experiment

The effect of light absorption by sample in the analysis of Makerfringe data for estimating a second-order nonlinear coefficient hasbeen studied experimentally. Two theories, one by Jerphagnon andKurtz that neglects the absorption effect and one by Herman and Haydenthat takes into account the absorption effect, were compared with theexperimental results. It was found that Jerphagnon and Kurtz'sformula was unable to predict correctly not only the magnitude but alsothe incident angle dependence or the sample thickness dependence of thesecond harmonic signal generated by the sample with strong absorption, whereas the theory by Herman and Hayden was able to make thosepredictions fairly well. It was also found that the error in theestimated nonlinear coefficient when one uses Jerphagnon and Kurtz'sformula could be as large as 2-4 times the true value, depending onsample thickness.     

A study of a new data association and track initiation method with normalized distance squared ordering

In an underwater environment, measurements regarding true targets and false targets (clutter) can be made. Therefore, a suitable data association method to exactly detect and track a target and an efficient track initiation method for judging tracks formed by the target should be selected in this environment. This paper attempts to propose a new data association method and track initiation method to detect and track targets more effectively. Also, the performance of the new method is tested in a series of Monte Carlo simulation runs and is compared with the existing data association and track initiation methods in a cluttered environment.     

Dynamically modulated intensity interrogation scheme using waveguide coupled surface plasmon resonance sensors

An electro-optically modulated intensity interrogation method based on tunable waveguide coupled surface plasmon resonance sensors has been proposed. It has been theoretically and experimentally demonstrated that the proposed scheme can enable sensitive measurement of measurand variations. By modulating the refractive index in the waveguide layer, this interrogation method yields modulated signal whose amplitude is related to measurand's refractive index. This amplitude modulated signal offers a higher signal to noise ratio and eliminates additive noise in the sensor system. A preliminary investigation using saline buffers with different NaCl concentrations shows a resolution of 2.3 × 10^?6 refractive index unit by our approach. Resolution can be controlled by the amplitude of the applied modulation voltage and can be further enhanced by optimizing the device structure or improving the electro-optical (E-O) coefficient of the E-O material. This approach is simple, stable, and promising for low-cost or multi-channel SPR biosensor applications.     

Evolutionary level set method for structural topology optimization

This paper proposes an evolutionary accelerated computational level set algorithm for structure topology optimization. It integrates the merits of evolutionary structure optimization (ESO) and level set method (LSM). Traditional LSM algorithm is largely dependent on the initial guess topology. The proposed method combines the merits of ESO techniques with those of LSM algorithm, while allowing new holes to be automatically generated in low strain energy within the nodal neighboring region during optimization. The validity and robustness of the new algorithm are supported by some widely used benchmark examples in topology optimization. Numerical computations show that optimization convergence is accelerated effectively.     

Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2DOF in vitro apparatus

This paper reports on the performance evaluation of a dental handpiece in simulation of clinical finishing using a novel two-degrees-of-freedom (2DOF) in vitro apparatus. The instrumented apparatus consisted of a two-dimensional computer-controlled coordinate worktable carrying a dental handpiece, a piezoelectric force dynamometer, and a high-speed data acquisition and signal conditioning system for simulating the clinical operations and monitoring the dental finishing processes. The performance of the dental handpiece was experimentally evaluated with respect to rotational speed, torque, and specific finishing energy under the applied clinical finishing conditions. The results show that the rotational speeds of the dental handpiece decreased by increasing either the depth of cut or the feed rate at a constant clinically applied air pressure and water flowrate. They also decreased when increasing both the tangential and normal finishing forces. The specific finishing energy decreased with an increase in either depth of cut or feed rate, while the finishing torque increased as either the depth of cut or the feed rate was increased. Implications of these results were to provide guidance for proper applications of dental handpieces in clinical practice.