SiO2 nanoparticles surface modified with polyethyleneimine-oleic acid complex as stabilizers of Ni fine particles in dense nonaqueous suspensions

SiO₂ nanoparticles (NPs) surface modified with polyethyleneimine-oleic acid complex (PEI-OA) has successfully prepared in a simple manner as a stabilizer of metal (Ni) fine particles (FPs) as well as a component of Ni/SiO₂ composite particles. Starting from SiO₂ NPs which were collected through centrifugation of commercial SiO₂ colloids, it was found that PEI-OA can effectively adsorbed on collected SiO₂ NPs surface during their redispersion process in toluene with the assistance of ultrasonication. The aggregated particle size (Z-average size) in toluene could be successfully reduced to c.a. 100 nm under saturated adsorption of PEI-OA. It was also found that PEI-OA-modified SiO₂ NPs can effectively attach to the Ni FPs by a simple mixing process in toluene. The FE-SEM observation confirmed the adsorption of the PEI-OA-modified SiO₂ NPs on the Ni FPs without forming severe NP aggregates. Owing to the attachment of the PEI-OA-modified SiO₂ NPs with surfaces that are compatible to toluene and α-terpineol, the suspension stability of the Ni/SiO₂ composite particles in these solvents drastically improved. The result was confirmed by the effective reduction of the sedimentation velocity of diluted suspensions as well as by the reduction of the viscosity of dense suspensions.     

Spectroscopic and Photoluminescent Properties of Indium Zinc Oxide (IZO) and IZO/Ag/IZO Sandwiched Film

We report the ellipsometric and photoluminescence (PL) properties of Indium zinc oxide (IZO) films, which were grown by radio frequency sputtering under Ar and O₂ atmospheres. IZO films grown under an O₂ atmosphere (IZO (O₂)) showed enhanced PL properties when compared to the films grown under an Ar atmosphere (IZO (Ar)), particularly with respect to the band-edge emission. The enhancement of band-edge emission can be attributed to the reduction in the non-emissive defect states related to oxygen vacancies, which were repaired by sputtering under O₂ atmosphere, whereas the PL enhancement in green region is probably due to the formation of the different types of defects under the excess oxygen environment. This was also supported by the results of time-resolved PL measurements, where the band-edge emission of IZO (Ar) showed rapid decay with a 50 ps lifetime, which indicates the dominance of the relaxation pathway to underlying defect states. In contrast, the PL decay profiles of IZO (O₂) for band-edge and emissive defect states showed moderate decay with time-constants of 2.3 ns and 5.7 ns, respectively. The exciton relaxation dynamics were sensitive to the presence and its kinds of defect states, which were controlled by the growth conditions.     

Development of advanced arresters for GIS from 66 kV to 500 kV

New zinc oxide elements with a varistor voltage about twice that of conventional ones have been developed by reducing the ZnO grain size with a new additive, making it possible to halve the series number of elements in metal oxide surge arresters. The advanced arresters with these elements for GIS are smaller in volume by 40 to 60% compared with conventional ones. These advanced MOAs increase the flexibility in positioning MOAs and optimizing the GIS layout. This paper describes the performance of the new elements, the specification and construction of the advanced MOAs, and the results of typical evaluation tests. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 34–42, 2000     

Experiments on bubble behavior in a horizontal narrow divergent passage

This paper investigates a bubble, placed so that it bridges the cross section of a horizontal narrow divergent passage under Earth gravity (1-G). In a narrow passage, inertial forces are known to be small in comparison with viscous forces. Gravitational force is not dominant in bubble behavior in a horizontal narrow passage under the 1-G condition. In this sense, the bubble behavior in the passage is similar to that under a low-gravity condition. Understanding bubble behavior is important in relation to separating a gas from a two-phase gas-liquid flow and controlling a gas-liquid interface under low-gravity conditions. Thus, a single bubble is placed under the 1-G condition. The bubble geometry and its behavior are studied experimentally for gap sizes ranging from 0.5 mm to 2 mm and divergent angles from 1° to 5° using ethyl alcohol as the working fluid. The following results were obtained: (1) the bubble was found to move to the greater cross-sectional area; (2) the gas-liquid interface geometry in a top view can be expressed as a contact circle model that takes the maximum radius in the passage; and (3) the effects of gap size and the projected bubble area on bubble behavior are clarified. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(6): 447–461, 1998     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.     

1-O-alkyl-2,3-diacylglycerols in the skin surface lipids of the hairless mouse

A neutral lipid class was isolated by thin-layer chromatography from the skin surface lipids of the hairless mouse. The fraction migrated faster than triglycerides and had a migration rate similar to that of diacyl alkanediols (diester wax). Upon deacylation, however, the long-chain diols were identified as 1-alkylglycerol ethers based on their chromatographic properties and on the mass spectra of their nicotinylidene derivatives. Thus, the skin lipid fraction was identified as 1-O-alkyl-diacylglycerol. The alkyl moieties were all saturated and even-numbered and ranged in chainlength from C₁₆ to C₂₂ with 1-O-hexadecylglycerol amounting to 34% of the total glycerol ether moieties. The fatty acids derived from this lipid fraction were mostly monoenoic with chainlengths ranging from C₁₆ to C₂₄. The major acyl component was eicosenoic acid (20∶1) representing 61% of the total fatty acids.     

金属结合剂#600金刚石砂轮的接触放电修锐实验研究

针对微细金刚石磨粒很难从金属结合剂砂轮的胎体中出刃的问题，开发出一种新修锐方法一接触放电修锐、它采用一种旋转复合电极修整轮与砂轮接触磨削，在金属结合剂胎体与电极间产生微小的脉冲放电，逐渐去除砂轮的金属结合剂，使微细金刚石在砂轮工作表面出刃，达到精密修锐的目的。通过对金属结合剂#600金刚石砂轮进行修锐实验，研究其有效性、修锐条件和实际应用。实验表明，该修锐方法不仅不损伤微细金刚石磨粒出刃刃角，而且还可以消除磨粒周围的结合剂尾状物，产生较好的容屑空间。磨削光学玻璃(BK10)的试验结果显示它比机械修锐能够更好地提高磨削表面质量，Ra达到0．12μm。