Finite element analysis of optimized brace angle for the diagrid structural system

International Journal of Steel Structures - The Diagrid structural system is considered to be the best structural system for constructing free form structures, but it is also a very effective...     

Time-dependent reliability of ageing structures: an approximate approach

Concrete structures may deteriorate over time due to aggressive service environments, leading to a reduction in their strengths, stiffnesses and reliabilities. In general, the assessment of time-dependent reliability of ageing structures must consider uncertainties in structural deterioration as well as non-stationarities in the structural load processes. This paper develops an approximate method for assessing the impact of structural deterioration and non-stationary live loads on structures, which requires only low-dimensional integration and reduces the cost of assessing time-dependent reliability over a service life extending to 50 years significantly. This approximate method is demonstrated through several examples. The importance of non-stationarities in the resistance and load processes on time-dependent reliability is illustrated and the accuracy of the method is confirmed in several cases utilising Monte Carlo simulation.     

Ultrafast terahertz responses in monolayer graphene

ABSTRACT

We theoretically investigate the ultrafast terahertz (THz) properties of monolayer graphene. The analytical formulations of the photon carrier, electric polarization and optical current are obtained by solving the Bloch-equations in present of the ultrafast THz Gaussian pulse. Graphene shows a large nonlinear and ultrafast optical response at THz frequencies due to the gapless and relativistic Dirac particles with nearly linear energy dispersion. It is found that the photon carrier density, electric polarization and optical current density increase with increasing the frequency of the THz pulse. These theoretical results are in agreement with recent experimental findings. This study confirms further that graphene exhibits important features and is relevant to the applications in the ultrafast THz fields.     

Mathematical simulations of the electromagnetic system of a subminiature magnetoelectric engine

This paper is devoted to simulations of a valve electric engine with excitation from high-energy permanent rare-earth magnets. A feature of the design of the engine under consideration is that a stator is manufactured using the polycapillary glass-fiber technique. The conductors of the distributed stator winding are placed in holes pm the tube wall. The cylindrical bipolar rotor is made of iron–neodymium–boron. The assumption accepted in the work during the solving the Laplace equation has made it possible to obtain analytical solutions for the magnetic flux, emf, current, electromagnetic torque, and electromagnetic power.     

Peat swamps at Giral lignite field of Barmer basin,Rajasthan, Western India: understanding the evolution through petrological modelling

International Journal of Coal Science & Technology - The lignite samples collected from Giral lignite field of Barmer basin have been subjected to petrological investigation. The data generated...     

Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures

International Journal of Coal Science & Technology - Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the...     

Column Kinetic Tests Assessing Geochemical Behavior of Mine Wastes in the Jerada Coal District (Morocco)

The Jerada anthracite mine in Morocco was abandoned in 2001 after producing approximately 20 million tonnes of solid waste. The acid generating potential of these wastes was determined by performing tests on five samples collected from relatively older and more recent waste deposits. No carbonate minerals were identified. Pyrite was the only sulphide mineral observed and much of it had been completely transformed into Fe-oxides. Analysis of the waste indicated low levels (<1 %) of Ca and Mg, while Fe and Al concentrations generally exceeded 5 %. Modified Sobek static tests and column kinetic tests were conducted for 24 months. The static test results were not conclusive (20 <net neutralising potential <20 Kg CaCO₃/t). Leachates from the kinetic tests for three of the five samples showed an initially acidic pH, while those of the remaining two became acidic by the end of the tests. Sulfate concentrations (SO₄ ^2?) decreased over time from 5000 to 200 mg/L.     

Prediction of seepage water pressure for slope stability at the Gol-E-Gohar open pit mine

Slope stability accidents are one of the leading causes of destruction at open pit mining operations. Such interception of the seepage water results in the water inflow from the surrounding aquifer towards the mine excavations. In order to design an effective drainage scheme for an open pit mine, prediction of water inflow into the pit is essential. These changes have resulted in some failures and instability problems in different parts of Gol-E-Gohar iron open pit mine. It seems that main parameters which effect the failure and instability of the mine slopes are high pressure of groundwater and system of discontinuities (faults, joins, and bedding planes), which intersect the pit walls. The analysis results indicate that stability of the final pit slopes is sensitive to multi-planar failures and confined water in the walls pit is also a factor adversely affecting the stability. Problems associated with groundwater at the site were also assessed with the analyses of piezometric level and groundwater inflow.     

The Effects of Annealing After Equal Channel Angular Extrusion (ECAE) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy

Metallurgical and Materials Transactions A - Equal channel angular extrusion (ECAE) of 49Fe-49Co-2V, also known as Hiperco® 50A or Permendur-2V, greatly improves the strength and ductility of...     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.