Prediction-based Deadbeat Control for Grid-connected Inverter with L-filter and LCL-filter

Abstract—In this article, an improved deadbeat control algorithm suitable for digital signal processor-based circuit implementation is proposed. The control algorithm allows the derivation of a nearly sine wave output current with a fixed switching frequency of a current-controlled voltage source inverter. Two low-pass output filters configurations are considered in this study: a simple inductance filter and an LCL-filter. By taking advantage of prior knowledge of the state variables’ shape, the improved deadbeat control algorithm is based on a simple prediction model to derive the expected duty cycle needed to switch on and off the power switches. The control study of the grid-connected inverter with L and LCL output filters has been considered using a co-simulation approach with (Powersim Inc., Rockville, Maryland, USA) and MATLAB software (The MathWorks, Natick, Massachusetts, USA). The obtained results show the improvement of both shape quality and tracking accuracy of the output current quantified by low ripple content and a nearly unity power factor.     

Dyeing of cationised cotton with acid dyes

The production of cationised cotton fabrics, via Sandene 8425, 1, 1-dimethyl-3-hydroxy azetidinium chloride and 1, 1-diethyl-3-hydroxy azetidinium chloride, greatly enhances the exhaustion and fixation of acid dyes. This paper shows that these dyes can be used in the absence of salt in a neutral medium. Wash fastness, light fastness and other properties were studied.     

Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process

ABSTRACT

4043 aluminium deposits were elaborated using a 3D print device equipped with a Cold Metal Transfer welding source. Two sets of process parameters leading to different average powers were compared in order to establish the relations between the powers and energies produced and the geometrical characteristics of the deposits. The effects of the travel speed and layer superposition on the transfer mechanisms as well as on the geometrical characteristics of the deposits were discussed for both sets of parameters. Finally, the formed microstructures were analysed and the porosity defects were quantified and discussed with regard to the heat input characteristics and the solidification conditions.     

Preimplantation hormonal differences between the conception and non-conception menstrual cycles of 32 normal women

We compared daily urinary concentrations of oestrogen and progesterone metabolites in paired menstrual cycles (conception and non-conception) from 32 women. Volunteers with no known fertility problems were enrolled in the study at the time they began trying to become pregnant. They collected first-morning urine specimens and kept daily records of menstrual bleeding and sexual intercourse for 6 months or until they became clinically pregnant. Intercourse in non-conception cycles was close to the time of ovulation so that failure to conceive was caused by factors other than poorly timed intercourse. Compared with non-conception cycles, conception cycles had a steeper early luteal rise in progesterone and higher mid-luteal oestrogen and progesterone concentrations. These hormonal characteristics may be markers of better quality cycles, but because all these differences were in the luteal phase, we cannot rule out the possibility that the preimplantation embryo had stimulated early increases in steroid production. We propose an analysis strategy that could help support or refute the importance of preimplantation embryonic signalling, but our small sample size limits our own conclusions about this mechanism.     

The addition of reactive compounds to nonreactive dyebaths. Part 5-procedure for obtaining reactive dyeings on cotton

An easy procedure for the preparation of solutions containing certain types of reactive dye and their subsequent application on cotton is described. This procedure takes advantage of the expected high reactivity of these dyes, which have adjacent hydroxy and amino groups in the molecule, and strives to evade the problems usually associated with the preparation and application of such dyes in the solid form. Several factors that affect the colour strength of reactive dyeings thus obtained are investigated. Possible disadvantages when applying this procedure are discussed.     

Detail preserving impulsive noise removal

Most image processing applications require noise elimination. For example, in applications where derivative operators are applied, any noise in the image can result in serious errors. Impulsive noise appears as a sprinkle of dark and bright spots. Transmission errors, corrupted pixel elements in the camera sensors, or faulty memory locations can cause impulsive noise. Linear filters fail to suppress impulsive noise. Thus, non-linear filters have been proposed. Windyga's peak-and-valley filter, introduced to remove impulsive noise, identifies noisy pixels and then replaces their values with the minimum or maximum value of their neighbors depending on the noise (dark or bright). Its main disadvantage is that it removes fine image details. In this work, a variation of the peak-and-valley filter is proposed to overcome this problem. It is based on a recursive minimum–maximum method, which replaces the noisy pixel with a value based on neighborhood information. This method preserves constant and edge areas even under high impulsive noise probability. Finally, a comparison study of the peak-and-valley filter, the median filter, and the proposed filter is carried-out using different types of images. The proposed filter outperforms other filters in the noise reduction and the image details preservation. However, it operates slightly slower than the peak-and-valley filter.     

Study and characterization of porous copper oxide produced by electrochemical anodization for radiometric heat absorber

The aim of this work is to optimize the different parameters for realization of an absorbing cavity to measure the incident absolute laser energy. Electrochemical oxidation is the background process that allowed the copper blackening. A study of the blackened surface quality was undertaken using atomic force microscopy (AFM) analysis and ultraviolet-visible-infrared spectrophotometry using a Shimadzu spectrophotometer. A two-dimensional and three-dimensional visualization by AFM of the formed oxide coating showed that the copper surfaces became porous after electrochemical etching with different roughness. This aspect is becoming more and more important with decreasing current density anodization. In a 2 mol L ^-1 of NaOH solution, at a temperature of 90°C, and using a 16 mA cm² constant density current, the copper oxide formed has a reflectivity of around 3% in the spectral range between 300 and 1,800 nm. Using the ‘mirage effect’ technique, the obtained Cu₂O diffusivity and thermal conductivity are respectively equal to (11.5 ± 0.5) 10 to 7 m² s^-1 and (370 ± 20) Wm^-1 K^-1. This allows us to consider that our Cu₂O coating is a good thermal conductor. The results of the optical and thermal studies dictate the choice of the cavity design. The absorbing cavity is a hollow cylinder machined to its base at an angle of 30°. If the included angle of the plane is 30° and the interior surface gives specular reflection, an incoming ray parallel to the axis will undergo five reflections before exit. So the absorption of the surface becomes closely near 0.999999.     

Dynamic behavior of a two-stage gear train used in a fixed-speed wind turbine

The dynamic behavior of a two stage spur gear system used in a typical wind turbine is investigated in this paper. With the purpose of having an accurate simulation, for a given excitations, of the dynamic response of bearings, shafts and teeth in contact.In this study, we developed a lamped mass dynamic model with 12 DOFs. This model is excited by external and internal issues sources. The main factors of these excitations are the variability in the wind resource and the time varying mesh stiffness fluctuation.The aerodynamic torque is calculated from an empirical approach of the power coefficient. The incoming flow is modeled by an analytic equation test varies with time. The differential equations governing the system motion are solved by an implicit Newmark algorithm.