作战文书关键信息抽取方法*

作战文书关键信息抽取是实现自动标图系统的关键。现有研究多以文书处理流程设计为主,未深入分析军标用法,信息抽取不完整。为完整提取信息,提出了基于分词处理与语义角色标注（SRL）相结合的文书关键信息抽取方法,实验证明方法有效、可行。基于文中方法所设计的信息抽取系统,已在某集团军内推广、应用。     

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol isolated from human livers of lipidosis induced by 4,4′-diethylaminoethoxyhexesterol

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol were isolated from the liver of two patients with lipidosis induced by 4,4′-diethylaminoethoxyhexesterol. Identification was based upon the results of alkaline hydrolysis, acetolysis, IR spectrometry, and upon the determination of molar ratio of phosphorus-glycerol-ester. The contents of the bis-(monoacylglyceryl) phosphate were 10 and 16% total phospholipid phosphorus in them. The bis-(monoacylglyceryl) phosphate contained mainly docosahexaenoic (42%), oleic (29%), and linoleic acid (14%) and had the hemolytic activity of ca. one-eighth lysolecithin from egg yolk. Acidic lipids from the liver also were found to contain a lipid which is less polar than bis-(monoacylglyceryl) phosphate. The results of lipid analysis showed that the lipid possessed the structure of an acyl phosphatidylglycerol, and its content was ca. 2% total phospholipid phosphorus. Accumulation of 4,4′-diethylaminoethoxyhexesterol and its derivatives was found in clinical cases by thin layer chromatography and IR spectrometry. This fact suggested that human liver has an ability to metabolize the drug.     

Spinning and drawing properties of ultrahigh‐molecular‐weight polyethylene fibers prepared at varying concentrations and temperatures

The concentrations and temperatures of ultrahigh‐molecular‐weight polyethylene (UHMWPE) gel solutions exhibited a significant influence on their rheological and spinning properties. The shear viscosities of UHMWPE solutions increased consistently with increasing concentrations at a constant temperature above 80°C. Tremendously high shear viscosities of UHMWPE gel solutions were found as the temperatures reached 120–140°C, at which their shear viscosity values approached the maximum. The spinnable solutions are those gel solutions with optimum shear viscosities and relatively good homogeneity in nature. Moreover, the gel solution concentrations and spinning temperatures exhibited a significant influence on the drawability and microstructure of the as‐spun fibers. At each spinning temperature, the achievable draw ratios obtained for as‐spun fibers prepared near the optimum concentration are significantly higher than those of as‐spun fibers prepared at other concentrations. The critical draw ratio of the as‐spun fiber prepared at the optimum concentration approached a maximum value, as the spinning temperature reached the optimum value of 150°C. Further investigations indicated that the best orientation of the precursors of shish‐kebab‐like entities, birefringence, crystallinity, thermal and tensile properties were always accompanied with the as‐spun fiber prepared at the optimum concentration and temperature. Similar to those found for the as‐spun fibers, the birefringence and tensile properties of the draw fibers prepared at the optimum condition were always higher than those of drawn fibers prepared at other conditions but stretched to the same draw ratio. Possible mechanisms accounting for these interesting phenomena are proposed.     

对《公司法司法解释（三）》（征求意见稿）第二、三条的解读和疑问

在最高人民法院<公司法司法解释(三)>(征求意见稿)中,其第一部分"关于设立公司的民事责任"一直是理论界所争议的热点.结合该解释部分的第二、三条的规定,从法理角度入手,发起人在设立公司的过程中所承担的责任应当进行法价值的解读与思考.     

视觉导航机器人三维场景重建研究

针对自主导航机器人在室外中的立体视觉,应用了一种基于置信点扩展的三维重建的方法。该方法改进了归一化交叉相关算法,由视差空间图寻找视差空间中的置信点并进行表面跟踪,并用计算亚象素视差和中值滤波的办法得到视差图,最后使用滚球算法对从视差图中得到的点云数据进行三角化从而进行地形重建。实验结果表明,所使用匹配方法优于单一的归一化交叉相关方法,有着较强的鲁棒性,重建的地形效果较为理想。     

生物造粒流化床中颗粒污泥的物理性质及破碎与恢复特性研究

通过两套生物造粒流化床试验装置的并联和串联运行,运用摄影与图像分析、颗粒静沉和密度分析等方法,研究了流化床中颗粒污泥的物理性质及破碎与恢复特性.在作为一级柱(接受人工配置污水)运行的过程中,流化床主要经历了颗粒成长;在作为二级柱(接受一级柱出水)运行的过程中,流化床主要经历了颗粒破碎.试验结果表明,在多次轮回切换工作的过程中,流化床中的颗粒污泥具有动态稳定性,破碎的颗粒很容易得到恢复.颗粒污泥的有效密度随粒径而变化的趋势不明显,粒径-密度关系在双对数坐标图上始终处于同一领域,且远高于常规絮凝体的密度,表明流化床中形成的颗粒污泥具有密实的构造.     

抑制漂移误差的多描述视频编码*

针对多描述编码的漂移问题,提出一种基于H.264的多描述编码方案。该方案先对原始图像空间域采样形成两个子图像,然后通过相关联的两路H.264编码器,生成包含相同运动信息的描述,并在解码端采用自适应三次线性插值法恢复补偿信息,达到抑制漂移误差的目的。实验结果表明,该方案能有效提高编码效率,同时获得较好的视频传输质量。     

聚苯乙烯-铂络合物催化硅氢加成反应机理的研究

将巯甲基化交联聚苯乙烯－铂络合物微球用于催化苯乙烯与甲基二氯硅烷的加成反应，考察了用硅氢加成试剂处理催化剂的时间对其催化行为的影响。发现催化活性中心主要是Pt（Ⅱ），催化剂的后处理时间明显影响硅氢加成反应的诱导期和活性，并根据实验结果提出了可能的催化机理。     

Single‐pack,self‐curable,aqueous‐based polyurethane dispersion containing a disperse dye

An organic‐solvent‐soluble disperse dye was introduced into an aqueous phase by a reaction with a self‐emulsified, aqueous‐based polyurethane (PU), and this resulted in the formation of a homogeneous, aqueous polymeric dye dispersion. This aqueous polymeric dye was stable in a water phase with excellent color extension upon application. It was formulated with a latent curing agent, polyaziridine (e.g., TMPTA‐AZ), as a single‐component, self‐curable, aqueous polymeric dye. The curing reaction took place between PU carboxylic acid and the latent curing agent upon drying. A self‐cured polymeric dye was obtained with excellent color extension and fastness and resistance to organic solvents and water after drying. This single‐component, self‐curable, aqueous‐based PU system containing a dye has potential for printing, writing, and dyeing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 2006 © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3741–3747, 2006     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.