Trichothecene 3-O-acetyltransferase protects both the producing organism and transformed yeast from related mycotoxins. Cloning and characterization of Tri101

Trichothecene mycotoxins such as deoxynivalenol, 4,15-diacetoxyscirpenol, and T-2 toxin, are potent protein synthesis inhibitors for eukaryotic organisms. The 3-O-acetyl derivatives of these toxins were shown to reduce their in vitro activity significantly as assessed by assays using a rabbit reticulocyte translation system. The results suggested that the introduction of an O-acetyl group at the C-3 position in the biosynthetic pathway works as a resistance mechanism for Fusarium species that produce t-type trichothecenes (trichothecenes synthesized via the precursor trichotriol). A gene responsible for the 3-O-acetylation reaction, Tri101, has been successfully cloned from a Fusarium graminearum cDNA library that was designed to be expressed in Schizosaccharomyces pombe. Fission yeast transformants were selected for their ability to grow in the presence of T-2 toxin, and this strategy allowed isolation of 25 resistant clones, all of which contained a cDNA for Tri101. This is the first drug-inactivating O-acetyltransferase gene derived from antibiotic-producing organisms. The open reading frame of Tri101 codes for a polypeptide of 451 amino acid residues, which shows no similarity to any other proteins reported so far. TRI101 from recombinant Escherichia coli catalyzes O-acetylation of the trichothecene ring specifically at the C-3 position in an acetyl-CoA-dependent manner. By using the Tri101 cDNA as a probe, two least overlapping cosmid clones that cover a region of 70 kilobase pairs have been isolated from the genome of F. graminearum. Other trichothecene biosynthetic genes, Tri4, Tri5, and Tri6, were not clustered in the region covered by these cosmid clones. These new cosmid clones are considered to be located in other parts of the large biosynthetic gene cluster and might be useful for the study of trichothecene biosynthesis.     

Corrosion of aluminium alloy A6061-T6 members embedded in alkaline materials

Owing to the corrosive conditions in coastal areas, aluminium alloy railings and similar structures are normally used on infrastructure works such as bridges and roads located in such areas because aluminium alloys are inherently corrosion resistant. However, to achieve rigid support, aluminium alloy members are often embedded in concrete. Consequently, the embedded parts undergo corrosion caused by the alkaline content of the cement used in the concrete. This research was carried out to study the corrosion behaviour on both the embedded and unembedded sides of aluminium alloy A6061-T6 members embedded in the concrete and also to investigate the ability of a combined coating of anodic oxide and organic film to inhibit corrosion. Additionally, the influence of scratch damage on the performance of this coating material was evaluated.     

Extremely low-loss 1.5%-/spl Delta/ 32-channel athermal arrayed-waveguide grating multi/demultiplexer

A silica-based 1.5%-/spl Delta/ 100 GHz-spacing 32-channel athermal arrayed-waveguide grating (AWG) with compact size and extremely low insertion loss is described. By reducing the fibre coupling loss and the excess loss in a silicone-filled groove, an insertion loss of 1.3 dB was achieved with this athermal AWG.     

Breakdown characteristics of gas‐insulated switchgear for nonstandard lightning impulse waveforms under nonuniform electric field

To improve the insulation specification of gas‐insulated switchgear (GIS), it is necessary to recognize the insulation characteristics of SF₆ gas during actual surges (called nonstandard lightning impulse waveforms) occurring at field substations. The authors observed the insulation characteristics of SF₆ gas gap under various types of nonstandard lightning impulse waveforms and compared them quantitatively with those obtained with standard lightning impulse waveforms. The experimental results were used to derive an evaluation method for real surges, which was applied to typical surges for various UHV and 500‐kV systems. In the preceding study, therefore, only the case of a quasi‐uniform electric field (with a typical range of field utilization factors in the bus of a GIS) was investigated. In the present investigation, the insulation characteristics of an SF₆ gas gap for a nonuniform electric field were observed experimentally and an evaluation method for converting nonstandard lightning impulse waveforms equivalently to the standard lightning impulse waveform was investigated. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(1): 11–18, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21144     

Hydrogels with the ordered structures

A water-swollen hydrogel with a molecularly-ordered structure was prepared by copolymerizing acrylic acid and acrylic monomer containing hydrophobic long alkyl or mesogenic moiety. The gels with a long alkyl side chain formed the crystalline structure and undergo the reversible order–disorder transition with change in temperature or solvent composition which accompanied a dramatic change in Young's modulus. These gels exhibited such chemomechanical behaviors as the shape memory and the rotational motility on the water surface. On the other hand, the gels with the mesogenic side chain formed the liquid crystalline structure with polymorphism in water, and mesophase diagram was established by changing copolymer composition and water content. Mechanism of these structural and chemomechanical behaviors has been explained in terms of order–disorder transition.     

Optimization of interface structures in crystalline silicon heterojunction solar cells

In heterojunction solar cells consisting of hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si), suppression of epitaxial growth at the heterointerface is found to be crucial to achieve high solar cell efficiencies. In order to avoid the epitaxial growth, wide-gap hydrogenated amorphous silicon oxide (a-SiO:H) has been applied to the heterojunction solar cells. We have fabricated a-SiO:H/c-Si solar cells using n-type and p-type c-Si substrates and demonstrated that incorporation of the a-SiO:H i layer prevents the harmful epitaxial growth at the heterointerface completely.     

Evaluation of Chinese hamster ovary cell stability during repeated batch culture for large-scale antibody production

Pharmaceutical manufacturing plants can be operated continuously for several months. It is therefore important to use cells with long-term stability for the production of active ingredients. We investigated the reliability and long-term stability of an antibody-producing cell line. A recombinant Chinese hamster ovary (CHO) cell line was cultivated in spinner flasks and reactors, including a practical production-scale reactor (1600 L), for 109 days to produce monoclonal antibodies against the HM1.24 antigen. During cultivation, the cells remained stable and there was an increase in the rate of cell proliferation, yielding viable cells at high density. A decrease in cell-specific productivity was associated with this increase in the rate of cell proliferation. The cells were genetically stable and other measures of cellular function remained consistent throughout the cultivation period.     

Shrunk multiline addressing method in a passive‐matrix‐driven liquid powder display

Abstract— A shrunk multiline addressing method (SMLA) in a passive‐matrix‐driven liquid powder display will be discussed. An algorithm to generate SMLA data that effectively reduces the number of scanning lines has been devised. The update time is reduced by 44.5% on average, and this reduction is maintained despite increased sizes of the images. The SMLA data generated by this algorithm is applied to e‐paper panels, thereby confirming the reduction in update time and that the image quality of the panels driven by SMLA is equal to that of conventionally driven ones.