Assessment of Cartosat-1 DEM for Modeling Floods in Data Scarce Regions

Water Resources Management - Digital Elevation Model (DEM) plays an important role in modeling floods. In data scarce developing countries, unavailability of high resolution topography and river...     

WDTF: A Technique for Wireless Device Type Fingerprinting

In this Work, a technique for wireless device type fingerprinting has been introduced. The technique utilizes the information that revealed as a result of the homogeneity in devices of the same make and the heterogeneity in devices of a different make. The diversity in devices of different make is due to different device hardware compositions and the variations in their management capabilities. We apply the statistical technique on network traffic to create unique, reproducible device signatures. We demonstrate the efficacy of our technique on network traffic captured in different scenarios. We have used a total of 300 devices types representing a wide range of device classes. In the experiment, we have used more than 1.5 GB of filtered traffic for analysis and performance evaluation. We measure the performance of the technique by considering the accuracy of device type detection. The results obtained are promising with a higher detection rate than its counterparts.     

In-plane compression porometry of battery separators

We have designed equipment that measures, by means of capillary flow porometry, the pore structure of sheet materials. The equipment measures the influence of superimposed compressive stress on pore structure as well. The bubble point pressure, mean flow pressure, and flow distribution of a battery separator have been measured, and the influence of compressive stresses on these parameters have been observed. Our results demonstrate that the pore structure for in-plane flow is considerably different from that for flow in the perpendicular direction, and the effect of superimposed compressive stress is appreciable.     

Adomian decomposition method for the MHD flow of a viscous fluid with the influence of dissipative heat energy

An investigation is carried out on the effect of dissipative heat energy on the flow of an electrically conducting viscous fluid past a shrinking sheet. Both viscous and Joule dissipation effects are considered along with heat generation/absorption for the enhancement of heat transfer properties. The governing nonlinear coupled partial differential equations are transformed into nonlinear ordinary differential equations by a suitable choice of similarity transformations. However, the complex transformed equations are solved by an approximate analytical method known as the Adomian decomposition method with a suitable initial guess solution assumed from the known initial conditions. Moreover, the behavior of several parameters characterizing the flow phenomena are studied via graphs and the numerical computations for the engineering coefficients are obtained and presented through tables. However, the major outcomes of the results are that a higher suction is required to resist the fluid temperature and sinks as well as the dissipative heat energy favors enhancing the fluid temperature at all points in the flow domain.     

Atomic force microscopy: Unraveling the fundamental principles governing secretion and membrane fusion in cells

The story of cell secretion and membrane fusion is as old as life itself. Without these fundamental cellular processes known to occur in yeast to humans, life would cease to exist. In the last 15 years, primarily using the atomic force microscope, a detailed understanding of the molecular process and of the molecular machinery and mechanism of secretion and membrane fusion in cells has come to light. This has led to a paradigm shift in our understanding of the underlying mechanism of cell secretion. The journey leading to the discovery of a new cellular structure the ‘porosome’,—the universal secretory machinery in cells, and the contributions of the AFM in our understanding of the general molecular machinery and mechanism of cell secretion and membrane fusion, is briefly discussed in this article.     

Milk Derived Antimicrobial Bioactive Peptides: A Review

In recent decades, bioactive peptides have attracted increasing interest as health promoting functional foods. A variety of naturally formed bioactive peptides have been found in fermented dairy products such as yogurt, sour milk, and cheese. Initially these peptides are inactive within the sequence of the parent protein molecule and can be generated by gastrointestinal digestion of milk, fermentation of milk with proteolytic starter cultures, and/or hydrolysis by proteolytic enzymes. Milk derived peptides exert a number of health beneficial activities, even upon oral administration. Bioactive peptides have a great impact on major body systems including the digestive, nervous, endocrine, cardiovascular, diabetes type II, obesity, and immune systems. Antimicrobial peptides are also an important ingredient of innate immunity, especially at mucosal surfaces such as lungs and small intestine that are constantly exposed to a range of potential pathogens. Therefore, it plays an important role in boosting natural immune protection by reducing the risk of chronic diseases. Bioactive peptides are considered as potent drugs with well-defined pharmacological residues and also used to formulate health-enhancing nutraceuticals.     

Comparative study of the performance of conventional and column flotation when treating coking coal fines

Investigations were carried out on coking coal fines by conventional cell and column flotation techniques. The effects of different operating parameters were evaluated for both conventional and column flotation. The coal fines were collected from Bhojudih washery, India. These coal fines averaged 24.4% ash, 19.8% volatile matter and 53.8% fixed carbon on a dry basis. A commercial grade sodium silicate, light diesel oil and pine oil were used as depressant, collector and frother respectively. The flotation performance was compared with release analysis. The conventional flotation results indicated that a clean coal with 14.4% ash could be obtained at 78.0% yield with 88.4% combustible recovery. The ash of the clean coal could be further reduced to 10.1% at 72.0% yield with 85.6% combustible recovery by using column flotation. The column flotation results were close to those obtained by release analysis.     

Gold nanoelectrode ensembles for the simultaneous electrochemical detection of ultratrace arsenic, mercury, and copper

Simultaneous electrochemical detection of As(III), Hg(II), and Cu(II) using a highly sensitive platform based on gold nanoelectrode ensembles (GNEEs) is described. GNEEs were grown by colloidal chemical approach on thiol-functionalized solgel derived three-dimensional silicate network preassembled on a polycrystalline gold (Au) electrode. GNEEs on the silicate network have been characterized by field emission scanning electron microscopy, X-ray diffraction, diffuse reflectance spectroscopy, and electrochemical measurements. Square wave anodic stripping voltammetry (SWASV) has been used for the detection of As(III) and Hg(II) without any interference from Cu(II) at the potentials of 0.06 and 0.53 V, respectively. The GNEE electrode is highly sensitive, and it shows linear response for As(III) and Hg(II) up to 15 ppb. The detection limit (signal-to-noise ratio = 4) of the GNEE electrode toward As(III) and Hg(II) is 0.02 ppb, which is well below the guideline value given by the World Health Organization (WHO). The potential application of the GNEE electrode for the detection of As(III) in a real sample collected from the arsenic-contaminated water in 24 North Parganas, West Bengal is demonstrated. The GNEE electrode has been successfully used for the simultaneous detection of As(III), Cu(II), and Hg(II) at sub-part-per-billion level without any interference for the first time. The nanostructured electrode shows individual voltammetric peaks for As(III), Cu(II), and Hg(II) at 0.06, 0.35, and 0.53 V, respectively. The analytical performance of the GNEE electrode is superior to the existing electrodes.     

Antioxidant activity of the extracts from Dillenia indica fruits

There has been growing interest in the beneficial health effects of consuming fruits and vegetables. Mainly, the presence of phenolic antioxidants is believed to have the protective mechanisms. In the present study the fruit of Dillenia indica was extracted with ethyl acetate, methanol and water. The total phenolic content of the extracts was determined by Folin–Ciocalteu method and antioxidant activity of the extracts was assayed through some in vitro models such as antioxidant capacity by phosphomolybdenum method, β-carotene-linoleate model system, and radical scavenging activity using ,-diphenyl-β-picrylhydrazyl (DPPH) method. The total phenolic contents of the fruit extracts as tannic acid equivalents were found to be highest in methanol extract (34.1%) followed by ethyl acetate extract (9.3%) and water extract (1.4%). Antioxidant capacity of the extracts as equivalent to ascorbic acid (μmole/g of the extract) was in the order of methanol extract > ethyl acetate extract > water extract. In comparison with butylated hydroxyanisole (BHA), at 100 ppm of concentration, the antioxidant and free radical scavenging activities of the extracts assayed through β-carotene-linoleate model system, and DPPH method were also found to be highest with methanol extract followed by ethyl acetate and water extracts. The results indicated that the extent of antioxidant activity of the extract is in accordance with the amount of phenolics present in that extract and the fruit of D. indica is rich in phenolics may provide a good source of antioxidant.     

An experimental study on the shattering behavior of a high strength armour steel under blast and long rod penetrator impact

Armour steel plates with drilled holes are filled with explosive and subjected to single or multiple blasts to induce shattering. The critical diameter for shattering under explosive detonation, found from the experiments matches closely with that of the long rod penetrator impacted plates. The damage pattern and fracture surface of the tested samples under blast effect have been compared with plates impacted with long rod penetrators for matching the observed shattering behavior. Difference in the shattering behavior of the armour steel subjected to single and multiple blasts has also been presented.