Structural characterizations of diglycerol monomyristate reverse micelles in aromatic solvent ethylbenzene

Using small-angle X-ray scattering (SAXS) we have investigated the shape and size of diglycerol monomyristate (designated as C14G2) nonionic surfactant reverse micelles in aromatic solvent ethylbenzene as a function of surfactant concentration, temperature, and water. When C14G2 is added into ethylbenzene globular type reverse micelles with maximum core diameter ca. 4.5 nm are formed under ambient conditions. The micellar structure (shape and size) did not change with the surfactant concentration. However, an increase in temperature decreased the micellar size due to an increase in the critical packing parameter (cpp). Surfactant becomes more lipophilic upon heating and the micellar curvature tends to become more negative at higher temperature. Addition of a small amount of water caused a significant micellar growth. For instance, incorporation of 0.3% water in the 5% C14G2/ethylbenzene system resulted in the formation of 2.1 time bigger micelles with a small water pool in the micellar core. Besides the micellar shape is modified into an ellipsoidal prolate, whose scenario can be understood in terms of hydration of the surfactant's headgroup. Hydration decreases the cpp and favors micellar growth. An increase of temperature of a water incorporated system decreased the micellar size due to dehydration, which is equivalent to rod-to-sphere type transition.     

Evaluation of Humidity Correction Factor of Disruptive Discharge Voltage of Standard Sphere Air Gaps

The humidity correction method prescribed in the existing IEC standard is based on experimental data obtained under absolute humidity between 5 and 12 g/m³. A discussion on the humidity correction method is needed for higher absolute humidity regions, which is experienced during summer in Japan, and also throughout the year in tropical countries. The effect of absolute humidity on disruptive discharge voltages of standard sphere air gaps has been studied experimentally for several years under conditions of natural humidity, between 2 and 22 g/m³. In the cases of a.c. and lightning impulse voltage application, it was found that the existing IEC humidity correction method seems to be proper for most of the gap spacings studied under absolute humidity up to 22 g/m³. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Synthesis and morphological control of europium doped cadmium sulphide nanocrystals

Europium doped cadmium sulphide (Cd(0.98)Eu(0.2)S) nanostructures were synthesised by chemical co-precipitation method using ethylene glycol (EG) and deionized water (Eu:CdS-1), and isopropyl alcohol (IPA) and deionized water (Eu:CdS-2) as mixed solvents. It has been found that the nanostructure of the europium doped CdS can be controlled by simply varying the mixed solvent system. Powder XRD pattern reveals the formation of hexagonal (wurtzite) and cubic (zinc blende) structure for Eu:CdS-1, and Eu:CdS-2, respectively. The crystallite size of the sample prepared using IPA and deionized water was measured to be 2.64 nm which is much smaller than that of the sample prepared using EG and deionized water as mixed solvent (3.65 nm). Morphology of the materials can also be changed from flower shaped crystals to paddy like structures by varying the mixed solvents. Band gap values of Eu3+ doped CdS nanocrystals synthesized from two different solvents were estimated using UV-reflectance spectra. The size and crystallinity of the samples were confirmed by HRTEM and SAED analysis. A significant change in the PL emission of the CdS nanocrystals was observed for the europium doped CdS which is mainly due to the presence of EU3+ ions which also play a significant role in the energy transfer process. It was also observed that the shift in the emission and efficiency depends on size and shape of the synthesised nanoparticles.     

Size selective excitonic transition energies in strongly confined CdSe quantum dots

We report on the synthesis of CdSe nanocrystal quantum dots (QDs) of different radii (R). Size dependent optical properties like increase in the confinement energy with decreasing radius for different excitonic transitions are studied. Different excitonic transitions are calculated from the second derivative of UV-vis absorption spectra of as synthesized CdSe QDs. The transitions are assigned to specific states by calculating the transition energies using effective mass approximation. A close matching of the transition energies with the experiment suggesting that the second derivative of the absorption spectra could provide a direct knowledge of the electronic transition for the direct band gap semiconductor quantum dots.     

Vacuolar H(+)-ATPase and plasma membrane H(+)-ATPase contribute to the tolerance against high-pressure carbon dioxide treatment in Saccharomyces cerevisiae

As a non-thermal sterilization process, high-pressure carbon dioxide treatment (HPCT) is considered to be promising. The main sterilizing effect of HPCT is thought to be acidification in cytoplasm of microorganisms. We investigated the tolerance mechanism of Saccharomyces cerevisiae to HPCT with special reference to vacuolar and plasma membrane H(+)-ATPases. HPCT was imposed at 35 degrees C, 4 to 10 MPa, for 10 min. slp1 mutant defective in vacuole morphogenesis was more sensitive to HPCT than its isogenic parent. Concanamycin A, a specific inhibitor of vacuolar H(+)-ATPase (V-ATPase), at 10 microM rendered the parent more HPCT-sensitive to the level of slp1. To confirm further the contribution of V-ATPase to the tolerance against HPCT in S. cerevisiae, we compared vma1 mutant of V-ATPase with its isogenic parent for their HPCT sensitivity. vma1 mutant was more sensitive to HPCT than its parent. Addition of 10 microM vanadate, an inhibitor of plasma membrane H(+)-ATPase (P-ATPase), to the wild type strains also increased the inactivation ratio. These results clearly show that V- and P-ATPases contribute to the tolerance against HPCT in S. cerevisiae by accumulating excess H(+) from cytoplasm to vacuole and excluding H(+) outside of the cell, respectively.     

Dietary supplementation of gamma-linolenic acid improves skin parameters in subjects with dry skin and mild atopic dermatitis

Disruption of the skin barrier function caused by epidermal hyper-proliferation, results in the skin becoming dry and showing high transepidermal water loss (TEWL). Gamma linolenic acid (GLA) is reportedly efficacious for treating TEWL and epidermal hyper-proliferation. In this study, to elucidate the effect of GLA-rich oil on skin function, GLA-containing food was given to adults with dry skin or mild atopic dermatitis and skin parameters were evaluated. In the results, we recognized beneficial effects on the TEWL index. The efficacy of GLA was also demonstrated to be statistically significant especially in subjects with pro-inflammatory features. The results suggest that the mechanism of improvement of skin barrier has been associated with possible generation of anti-inflammatory metabolites from GLA. The clinical physician also confirmed that none of the subjects showed any noteworthy side effects. GLA-enriched food appears to be safe and to improve skin barrier function in subjects with dry skin conditions and mild atopic dermatitis.     

In situ binary sol–gel reaction of various trifunctional alkoxysilane in the silane‐grafted polyolefin matrix and its effect upon the mechanical properties

The vinyltrimethoxysilane‐grafted ethylene‐propylene copolymer/trifunctional methoxysilane (EPR‐g‐VTMS/RTMS) composites were prepared via in situ silica sol–gel reactions. Five trifunctional methoxysilane compounds (n‐hexyltrimethoxysilane, n‐decyltrimethoxysilane, n‐tetradecyltrimethoxysilane, n‐octadecyltrimethoxysilane, and phenyltrimethoxysilane) have been selected for this study. The water‐cross‐linked EPR‐g‐VTMS/RTMS composites were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si CP/MAS NMR, wide‐angle x‐ray scattering, tensile strength, and field emission scanning electron microscopy measurements. The type of RTMS additive has a substantial influence on the nature of siloxane band networks and eventually the mechanical tensile properties. This finding suggests that the interaction and/or entanglement between the EPR‐g‐VTMS matrix and the substituent of the RTMS additives are crucial for the modifying mechanical properties. Moreover, for the water‐cross‐linked EPR‐g‐VTMS/CnTMS (n = 6, 10, 14, and 18) composites, the joint evidence provided by attenuated total reflectance‐Fourier transform infrared spectroscopy, ²⁹Si CP/MAS NMR, and wide‐angle x‐ray scattering results suggested the formation of ladder‐type poly(n‐alkyl silsesquioxane)s and the presence of the highly ordered structure with a thickness equal to the length of two n‐alkyl groups in all‐trans conformation. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.