Dynamic epistemic logic of belief change in legal judgments

This study realizes belief/reliability change of a judge in a legal judgment by dynamic epistemic logic (DEL). A key feature of DEL is that possibilities in an agent’s belief can be represented by a Kripke model. This study addresses two difficulties in applying DEL to a legal case. First, since there are several methods for constructing a Kripke model, our question is how we can construct the model from a legal case. Second, since this study employs several dynamic operators, our question is how we can decide which operators are to be applied for belief/reliability change of a judge. In order to solve these difficulties, we have implemented a computer system which provides two functions. First, the system can generate a Kripke model from a legal case. Second, the system provides an inconsistency solving algorithm which can automatically perform several operations in order to reduce the effort needed to decide which operators are to be applied. By our implementation, the above questions can be adequately solved. With our analysis method, six legal cases are analyzed to demonstrate our implementation.     

Application of Macromonomers for Pressure Sensitive Adhesives I. Adhesive and Surface Properties

Adhesive and surface-chemical properties of poly(styrene macromer-butyl acrylate) copolymers, poly (styrene-butyl acrylate macromer) copolymers and poly (styrene-butyl acrylate) random copolymers were investigated. The results were as follows:

(1) The adhesive properties of the copolymers which were prepared by the macromer-technique were different from the random copolymers.

(2) It was found that there were differences in the surface and molecular structure between the copotymers which were prepared by the macromer technique and the random copolymers. These differences were evident from the results of measurements of the surface free energy of the copolymers and of the interfacial tension of water/toluene in the presence of the copolymers.

(3) The reason why there were differences in the surface and molecular structure seemed to be that the copolymers which were prepared by the macromer technique had graft chains and a different inner-structure from the random copolymers. Therefore, it was suggested that the graft copolymers which were prepared by the macromer technique had a phase-separated structure.     

Synthesis of bis(2,4-diphenylbutyl) phthalate and its application as a plasticizer for poly(vinyl chloride) from waste polystyrene

Bis(2,4-diphenylbutyl) phathalate, a plasticizer for poly(vinyl chloride) (PVC), was synthesized from 2,4-diphenyl-1-butene obtained by a thermal decomposition under reduced pressure of waster polystyrene. The heat stability of bis(2,4-diphenylbutyl) phthalate was determined by thermogravimetric analysis and compared with typical plasticizers. It was recognized that bis(2,4-diphenylbutyl) phthalate showed high heat resistant. A test sheet of plasticized PVC with bis(2,4-diphenylbutyl) phthalate and bis(2-ethylhexyl) phthalate was prepared. The test sheet was used for determination of the plasticizing performance of bis(2,4-diphenylbutyl) phthalate. Although the effect of bis(2,4-diphenylbutyl) phthalate imparting flexibility to PVC is poorer than that of bis(2-ethylehexyl) phthalate, the former phthalate is well compatible with PVC and exceedingly heat-resistant.     

Studies on suspension and emulsion. XLVI. Emulsifier-free emulsion polymerization of styrene in acetone–water

Emulsifier-free emulsion polymerization of styrene in acetone–water medium was carried out using potassium persulfate as initiator. Below acetone content of 40 vol %, stable emulsion was prepared and polymerizations were remarkably fast compared with those in pure water. The particle size decreased from 0.5 to 0.17 μm with an increase in acetone content in the range 0–40 vol %, and the distributions were very sharp. The optimum polymerization for the preparation of the stable emulsion was: styrene, 20 vol %; acetone/water, 40/60 (v/v); KPS, 3.4 × 10^?3 mole/l; temp., 90°C.     

Correlation between friction of articular cartilage and reflectance intensity from superficial images

The lubrication mechanism of articular cartilage is characterized by an efficient performance. In this work, friction of articular cartilage was evaluated with in-site images of articular surface. The images were captured with the laser light reflected at the interface between a prism and articular cartilage. The attenuation of reflectance was associated with the increase of the contact of collagen network of articular cartilage. The light reflectance and friction coefficient for short sliding presented a significant positive correlation. Friction tests were also carried out for short (30 s) and long (300 s) preloading times. The results indicate that depletion of fluid film is responsible for the increase of friction and the recovery of the fluid film was observed for the long preloading after the early stage of sliding.     

Dynamic analysis of reinforced concrete frame-wall structures

The nonlinear response and failure mechanism of reinforced concrete frame-wall systems is investigated through the employment of a mathematical model. The mathematical model is composed of two mechanical models: a concentrated spring model used for the flexural behaviour of beam and column type members and a multiple spring model used for the response of the wall system. Both account for inelastic behaviour of reinforced concrete.The mathematical model is applied to a ten-storey frame-wall system. The constituent members are replaced by one of the mechanical models whose stiffness characteristics reflect the inelastic properties and hysteresis tendencies of the member. The resulting equations are solved by a step by step time integration procedure. Computed results are compared with experimental results obtained from a structure tested on the Illinois earthquake simulator. The correlated results are then used to define the significant response characteristics.     

Calcium phosphates formation on CaTiO<Subscript>3</Subscript> coated titanium

In this study, performance of calcium phosphate formation of CaTiO₃ coating film on Ti in Hanks’ balanced saline solution (HBSS) was investigated. CaTiO₃ thin films with a thickness of 50 nm were deposited on Ti using radiofrequency (RF) magnetron sputtering. The temperature of Ti substrate was adjusted to room temperature (RT) and 873 K. Thereafter, the specimens deposited at RT were annealed at 873 K in air for 7.2 ks. The films were characterized by grazing incident angle X-ray diffractometry (GI-XRD) and X-ray photoelectron spectroscopy (XPS). After immersion in HBSS for 60 d, on CaTiO₃ coated Ti, the formation of hydroxyapatite (HAP) was observed. Furthermore, HAP layer formed was thicker on the specimen on which CaTiO₃ film was deposited at RT and annealed than that prepared at 873 K. The major difference between both specimens was the chemical properties of the outermost surface. In summary, CaTiO₃ thin film deposited at RT and followed by annealing at 873 K for 7.2 ks in air enhances calcium phosphate formation ability on Ti.