A 1-inch 2-M pixel HDTV CCD image sensor with tungsten photo-shieldand H-CCD shunt wiring

A 1-inch 2-million pixel FIT-CCD image sensor for HDTV has been developed, which features a tungsten photo-shield and horizontal CCD (H-CCD) shunt wiring. Tungsten photo-shield, which has low reflectance and good step coverage characteristics, reduces smear level to -110 dB, combined with a frame-interline-transfer (FIT) scheme. The tungsten photo-shield also acts as a shunt busline, supplying transfer pulses to vertical CCD (V-CCD) electrodes, so that a 1.2×10ˆ5 electron charge handling capability is obtained at a frame transfer frequency of 1 MHz. Newly developed H-CCD shunt wiring suppresses vertical line pair FPN, even with smaller transfer pulse amplitudes. H-CCD shunt wiring also helps reduce power consumption in the H-CCD by 2/3 as compared to that achieved with conventional wiring     

Remanent magnetism of sintered diamond with cobalt

Remanent magnetism of sintered diamond with cobalt has been measured with an astatic magnetometer. The results of measurements show that the intensity of remanent magnetism strongly depends on Knoop microhardness value. It is also found, from alternating field demagnetization experiment, that a specimen with higher intensity of magnetization has good magnetic stability.     

High-precision voltage-measuring method using fast sampled data for electric power systems

Control and protection equipment in power systems requires higher sensitivity and operational reliability to meet today's changing power system requirements. The voltage-measuring deviation requirement for advanced voltage and var control equipment is less than 0.1 percent under conditions of harmonic distortion in the voltage waveform and power-system frequency variation. Studies on digital signal processing suitable for electric power systems showed that these requirements are satisfied using fast sampling and very fast 32-bit floating point operations by a Digital Signal Processor (DSP). This paper describes the design philosophy of a high-precision power system voltage-measuring method using fast sampled data. In addition, total voltage-measuring deviation characteristics under a combination of the techniques are described along with digital filter characteristics, frequency-measuring deviation characteristics, frequency variation versus gain-compensation characteristics of a digital filter, and peak value operating principles.     

An Automatic Test-Generation System for Large Digital Circuits

A new test-generation system (FUTURE) for large digital circuits (more than 10K gates) is based on a nine-valued FAN algorithm. Fault simulation adopts a concurrent simulation adopts a concurrent simulation technique. The system consists of four major modules: fault modeling, random pattern generation, algorithmic pattern generation, and fault simulation. The system can be a powerful CAD tool and effectively generate test patterns for large sequential circuits with Scan Path.     

Interrelationships of clinical outcome, length of resection, and energy cost of walking after prosthetic knee replacement following resection of a malignant tumor of the distal aspect of the femur

An automated method for analysis of in vivo proton magnetic resonance (MR) spectra and reconstruction of metabolite distributions from MR spectroscopic imaging (MRSI) data is described. A parametric spectral model using acquisition specific, a priori information is combined with a wavelet-based, nonparametric characterization of baseline signals. For image reconstruction, the initial fit estimates were additionally modified according to a priori spatial constraints. The automated fitting procedure was applied to four different examples of MRS data obtained at 1.5 T and 4.1 T. For analysis of major metabolites at medium TE values, the method was shown to perform reliably even in the presence of large baseline signals and relatively poor signal-to-noise ratios typical of in vivo proton MRSI. Identification of additional metabolites was also demonstrated for short TE data. Automated formation of metabolite images will greatly facilitate and expand the clinical applications of MR spectroscopic imaging.     

Automatic welding of pipeline in Japan: Part 2—The development of a method for the branch pipe joint in ship pipeline

The pipelines used in a ship amount to tens of thousands of metres per ship, and so automatic welding of the pipelines has been widely applied from the viewpoint of saving labour. In most cases the automatic welding process has been used for the welding of butt-joints which can be applied to the pipes in rotary motion, and it has also been used for fillet-welding of the connection between flange and piping. In the butt-welding of fixed pipings, automatic welding processes are now being partly used for position welding but up to the present time automatic welding has seldom been applied to the various types of branch pipe joints in which the welded lines form three-dimensional curves.In recent years, great progress has been made in the technique of constructing steel pipe structures and in the development of practical gas cutting processes to prepare the curves needed for the various welded joints used in piping. This paper deals with various conditions and performance requirements needed for automatic welding, such as the selection of shapes of prepared edges of pipings to be welded, the control of welding positions, the control of welding torches in operation, and the solution and control of other production variables.     

Rheo-optical studies on the deformation mechanism of semicrystalline polymers. VIII. Dynamic x-ray diffraction of a high-density polyethylene film having row-structure of C-axis orientation

Dynamic x-ray diffraction is employed to scrutinize the structural origin of the α mechanical dispersion of a highdensity polyethylene having preferentially oriented rownucleated cylindritic texture around the machine direction (MD). Results indicate that the α₁ dispersion is associated with two kinds of orientation processes of crystallites: (1) the orientation process involving the rotation of crystallites around the crystal b-axis (lamellar axis) dominates in the MD specimen; (2) the other process accompanying the rotation of crystallites or lamellar segments around their crystal a-axis dominates in the TD (transverse direction) specimen. The complex apparent crystal lattice compliances show no frequency dependence in the real component and no appreciable value in the imaginary component, indicating that the α₁ process is definitely associated with the intercrystalline process, but not relavent to the intracrystal process. However, at elevated temperatures, the complex lattice compliances exhibit a remarkable frequency dependence, suggesting that the α₂ dispersion concomitant to intracrystalline nature takes place in this time scale. The α₂ dispersion was found to be more pronounced upon stretching along the lamellar axis (TD) than normal to it (MD).     

Electron transport through the MOCVD grown GaAs/AlGaAs/GaAs heterojunction barrier

We investigated the current/voltage characteristics of n+GaAs/undoped AlxGa1?xAs (200 A)/n+GaAs heterostructures grown by the metalorganic chemical vapour deposition (MOCVD) method between 77 K and 300 K. Both the voltage dependence and the temperature dependence of the current were in good agreement over a wide current range with the calculated results of the tunnelling and thermionic emission current.     

The effect of intraperitoneal and intra-aortic chemotherapy for unresectable gastric cancer

Regional chemotherapy was given 16 unresectable gastric cancer patients. Two types of the chemotherapy, intraperitoneal (IP) and intraaortic (IA) administration, were carried out. The control group was comprised of 17 patients. The response of the chemotherapy for primary tumor was 36.4% in the IP group and 20% in the IA one. Among these patients, 2 of 11 in IP and 1 of 5 in IA were able to resect the primary tumor. The 50% survival time of IP, IA and control was 347, 227 and 78 days, respectively. One-year survival rates of IP, IA and control were 68%, 29% and 0%, respectively. IP showed a significantly longer survival rate than controls (p < 0.001). All but one patient was able to stay at home. Intraperitoneal chemotherapy showed both local and systemic effects in unresectable gastric cancer.