Suppressive effects of bifidobacteria on lipid peroxidation in the colonic mucosa of iron-overloaded mice

The antioxidative effects of live bifidobacteria on lipid peroxidation in the colonic mucosa were investigated. Bifidobacterium bifidum strain Yakult, which has been used for production of fermented milk, most effectively inhibited lipid peroxidation catalyzed by ferrous iron in liposomes among 10 species of bifidobacteria from human intestinal flora. Oral administration of B. bifidum strain Yakult for 2 wk significantly decreased the level of lipid peroxide (thiobarbituric acid reactive substance) in the colonic mucosa of iron-overload mice (Fe 0.07% in diet). The iron concentrations in plasma and cecum contents were not affected by administration of B. bifidum strain Yakult. Bifidobacterium bifidum strain Yakult had no chelating or incorporating activity for ferrous iron in vitro. Therefore, the antioxidative effect of B. bifidum strain Yakult in the colonic mucosa was not thought to be based on the removal of ferrous iron from the reaction system of lipid peroxidation. These results suggested that B. bifidum strain Yakult protected the colonic mucosa from oxidative injury without inhibiting iron absorption.     

Electron microscopy at a sub-50 pm resolution

An aberration-corrected electron microscope developed in CREST project has been applied for imaging atoms and clusters buried inside crystals. The resolution of the microscope in scanning transmission electron microscopy (STEM) has experimentally proved to be better than 47 pm by use of a cold-field emission gun at 300 kV. The high resolution has given an advantage for imaging light elements such as lithium atoms discriminating one by one. Moreover, a three-dimensional structure imaging has been demonstrated for dopant clusters by a sub-50 pm STEM, using its high depth resolution.     

High-power and highly reliable 780 nm band AlGaAs laser diodes withrectangular ridge structure

A record light output power of 240 mW has been achieved for the 780 nm band AlGaAs laser diodes by using a rectangular ridge structure. The laser diodes have been operated for >1000 h at 60°C under 150 mW pulsed operation     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Position command shaping for vibration suppression considering target position correction

This paper presents a command shaping technique based on a minimum jerk control approach that takes into consideration target position correction during motion, for the fast and precise positioning in vibratory mechatronic systems. The positioning controller is designed using a two‐degree‐of‐freedom control: a feedback compensator is synthesized by H_∞ control design to ensure the robust stability, while a feedforward compensator suppresses the vibration in response based on a coprime factorization expression of the plant mechanism. The command shaping, on the other hand, eliminates the corresponding vibration components of the primary and secondary models in the position command, where the continuity of jerk component in the command can be ensured against the target position correction. The effectiveness of the proposed shaping technique has been verified by experiments using a table drive system on a machine stand. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 168(3): 38–47, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20838     

Preparation of Aluminum Nitride Powder from Aluminum Polynuclear Complexes

AIN powder was synthesized from aluminum polynuclear complexes. Basic aluminum chloride and basic aluminum lactate were used as the aluminum polynuclear complexes. These starting materials and glucose were dissolved in water and mixed homogeneously. AIN powder was obtained by calcining after drying and precalcining at 800°C under nitrogen gas flow. Then excess carbon was removed by firing in air. Nitridation in the system was investigated and compared with that in the alumina–carbon black system. It was found that in our reaction system nitridation began and proceeded at lower calcination temperatures above 1200°C than in the alumina–carbon black system. Using aluminum polynuclear complexes, AIN was synthesized through the nitridation of γ-alumina and produced in a very fine and sharp particle size distribution.     

Characteristics of hydrogen-fueled gas turbine cycle with intercooler,hydrogen turbine and hydrogen heater

The performances of a hydrogen-fueled gas turbine cycle equipped with an intercooler, regenerator, hydrogen turbine and recuperative hydrogen heater are analyzed. The intercooler is very effective to prevent the condensation and freezing of water vapor in cooling the suction air. The operation of hydrogen turbine in low-temperature range can also be prevented by adopting hydrogen heater. Thermodynamic analysis has revealed that the thermal efficiency and the specific output are considerably improved compared to those of the simple gas turbine cycle.     

Molecular properties of the two-component cell lysis system encoded by prophage phigaY of Lactobacillus gasseri JCM 1131T: cloning, sequencing, and expression in Escherichia coli

Shotgun cloning of the Lactobacillus gasseri JCM 1131T whole DNA yielded two recombinant plasmids, p118gaY1 and p118gaY2, which directed cell lysis activity. Sequencing analysis revealed that the two plasmids carried almost identical inserted genes in following orders (truncated genes, in parentheses): in p118gaY1, (orf149)-orf92-holgaY-lysgaY-orf35-attL-(mnaAgaY1); in p118gaY2, (orfXgaY1)-orf169-orf149-orf92-holgaY-lysgaY-orf35-attP-(intgaY). The lysgaY-encoded protein (designated as LysgaY, 33.7 kDa) showed significant homology with putative muramidases (peptidoglycan-degrading enzyme) of the Lactobacillus phage phiadh, Lj965, Lj928, LL-H, mv4, and mv1. By zymogram analysis, LysgaY overproduced in Escherichia coli exhibited lytic activity towards 17 Gram-positive bacterial strains, including lactobacilli, lactococci, and staphylococci. The holgaY-encoded protein (15.7 kDa) contained three potential transmembrane helices, resembling putative holins (cytoplasmic membrane-disrupting protein) of Lj928 and Lj965. On the other hand, another clone p118gaYR obtained by EcoRI-shotgun cloning carried the (ptsCgaY1)-attR-(intgaY) genes. Three sequences, attL, attP, and attR, had a 47-bp common (core) sequence, and the core of attR was located in 3' region of a potential tRNA(Arg) gene. These results suggested that (i) attL and attR are phage-host junctions, left- and right-arms, respectively, (ii) attP is a phage attachment site, and (iii) intgaY is an integrase gene for phage integration and/or excision. After mitomycin C-induction, phage particles were demonstrated by electron microscopy. The prophage (phigaY) is somewhat leaky in the host, and has the two-component lysis system (HolgaY-LysgaY), closely resembling that of Lj928 as well as Lj965.     

Analysis of multiple indicator dilution curves for estimation of renal tubular transport parameters

A model is developed to estimate the renal tubular secretory parameters by the multiple indicator dilution (MID) technique. The model allows the calculation of influx (from plasma space to tubular cell), efflux (from tubular cell to plasma space) and sequestration (from tubular cell to luminal side) rate constants. A program using the MID-statistical analysis with least squares fitting (SALS) system for the estimation of these parameters is presented. A trapezoid rule and a non-linear least squares regression were used to carry out definite integrals of cubic spline function and least squares fitting, respectively. The system presented seems to be useful for the precise and rapid estimation of the tubular secretory rate constants.     

Input system for part model in CAD from coloured hand-written illustration with use of ITV

An input system for CAD is developed to construct a part model within a computer from a hand-written sketch. The sketch is drawn based on the technical illustration method. The shape of the input part is constructed by the combination of cuboids and cylinders at present. A coloured illustration is adopted for the ease of the shape recognition and for the input of the technological information.

The illustration is fed into the computer via a black and white ITV. Colours are identified referring to the brightness of the input image. The constitutive bodies, the geometric element with the technological information and the content of the technological information are recognized through image processing such as noise filtering, thinning of the contours, detection of lines and so on. The input system outputs a set of commands to the modelling system. The integrated part model which includes not only the geometrical information but also the technological information of the part is constructed by the connected modelling system CIMS/MODE.

The combination of the input system and the modelling system can support the designer to construct the detailed part model within the computer effectively. It is expected to extend the ability of the input system to identify general hand-written illustrations so that the input method will be more practical and useful.