Redox‐Active Polymers Connecting Living Microbial Cells to an Extracellular Electrical Circuit

Microbial electrochemical systems in which metabolic electrons in living microbes have been extracted to or injected from an extracellular electrical circuit have attracted considerable attention as environmentally‐friendly energy conversion systems. Since general microbes cannot exchange electrons with extracellular solids, electron mediators are needed to connect living cells to an extracellular electrode. Although hydrophobic small molecules that can penetrate cell membranes are commonly used as electron mediators, they cannot be dissolved at high concentrations in aqueous media. The use of hydrophobic mediators in combination with small hydrophilic redox molecules can substantially increase the efficiency of the extracellular electron transfer process, but this method has side effects, in some cases, such as cytotoxicity and environmental pollution. In this Review, recently‐developed redox‐active polymers are highlighted as a new type of electron mediator that has less cytotoxicity than many conventional electron mediators. Owing to the design flexibility of polymer structures, important parameters that affect electron transport properties, such as redox potential, the balance of hydrophobicity and hydrophilicity, and electron conductivity, can be systematically regulated.     

Molecular Glue for RNA: Regulating RNA Structure and Function through Synthetic RNA Binding Molecules

We introduce the concept of molecular glues for RNA, in which specific RNA-binding small molecules induce designed structural changes in target functional RNAs, resulting in modulation of the functions. (Z)-NCTS is an RNA-mismatch-binding small molecule that recognizes 5′-r(XGG)-3′/5′-r(XGG)-3′ sequences (X=U or A) and acts as a molecular glue for RNA. The binding of (Z)-NCTS brings two distinct 5′-r(XGG)-3′ domains into contact with each other, and this can result in higher-order structural changes of target RNAs. We applied (Z)-NCTS to induce the formation of a proposed tertiary structure of a ribozyme together with activation of RNA-cleaving ability. The concept of a molecular glue could inspire new small-molecule-based strategies for regulating biological functions: a synthetic small molecule targeting functional RNAs could regulate the RNA structure and function.     

Effects of Smart Charging of Multiple Electric Vehicles in Reducing Power Generation Fuel Cost

The high penetration of variable sources of renewable power generation will lead to operational difficulties in supply/demand balancing in the entire power system. The mass deployment of electric vehicles (EVs) and plug‐in hybrid vehicles (PHEVs) will also cause significant changes in electricity demand. Therefore, controlling and managing the charging time of EVs/PHEVs are effective approaches that are imperative for improving balancing in power system operation. We assumed travel patterns for EVs in a model of the future Tokyo power system and analyzed the power system loads, including the charging load of the EVs, under several charging control scenarios. We verified that charging time controls are substantially effective for reducing the fuel costs in the power system. Further, we found that load leveling under a multicar charging management scenario gave the best results in terms of the fuel costs in all cases.     

Hydrodynamic characteristics of a butterfly valve — Prediction of pressure loss characteristics

Investigation on fluidmechanic performance on a butterfly valve has been carried out. A practical valve model of a given thickness and a hub is used for the loss coefficient theory. A theoretical loss coefficient has been formulated from a contraction factor obtained by applying the generalized Borda mouthpiece theory.

Cavitation stages (such as cavitation inception, supercavitation inception, cavitation damage inception, choking cavitation) have been theoretically predicted from the valve loss coefficient. The cavitation prediction has been carried out by applying the free streamline theory, where the relation between the loss coefficient and the critical cavitation factor has been formulated. The results of the theoretical prediction equations agree well with the experimental results.     

Effects of Size and Distribution of Spheroidized Cementite on Void Initiation in the Punched Surface of Medium-Carbon Steel

Metallurgical and Materials Transactions A - In this study, we investigated the effects of the size and distribution of spheroidized cementite on the characteristics of a punched surface as well as...     

Fabrication of Flexible and Transparent Conductive Nanosheets by the UV‐Irradiation of Gold Nanoparticle Monolayers

Conductive films that are highly transparent and flexible are extremely attractive for emerging optoelectronic applications. Currently, indium‐doped tin oxide films are the most widely used transparent conductive films and much research effort is devoted to developing alternative transparent conductive materials to overcome their drawbacks. In this work, a novel and facile approach for fabricating transparent conductive Au nanosheets from Au nanoparticles (AuNPs) is proposed. Irradiating an AuNP monolayer at the air–water interface with UV light results in a nanosheet with ≈3.5 nm thickness and ≈80% transparency in the UV–visible region. Further, the so‐fabricated nanosheets are highly flexible and can maintain their electrical conductivity even when they are bent to a radius of curvature of 0.6 mm. Fourier‐transform infrared and X‐ray photoelectron spectroscopy characterizations reveal that the transformation of the monolayer of AuNPs into the nanosheet is induced by the photodecomposition and/or photodetachment of the dodecanethiol ligands capping the AuNPs. Further, the UV‐irradiation of a hybrid monolayer consisting of AuNPs and silica particles affords the patterning of Au nanosheets with periodic hole arrays.     

Facilitated permeation of myoglobin through porous membranes: Different permeation behavior through membranes of polyoxyethylene- and dextran-conjugated polyamides prepared by quasi-living polymerization of a bicyclic lactam

In the ultrafiltration test of a myoglobin solution through porous membranes of the ABA-type block copolymers composed of polyamide as outer segments and polyoxyethylene (M_n = 1.9–2.0 × 10⁴) as an inner segment, in which the values of weight fraction of the polyamide segments (W) were 0.90, 0.84, 0.82, 0.81, and 0.73, the concentration of the permeate was found to be much higher than that in feed under the pressure difference of 1–2 kg/cm². Such singularly facilitated permeation was observed also in the test through the dense membranes of the polyamide–polyoxyethylene block copolymer with W of 0.81 and 0.73. On the other hand, neither porous nor dense membranes of the graft copolymer (W = 0.83) having a dextran stock (M_n = 1.8 × 10⁴) and 2.6 pieces of polyamide branches showed similar facilitated permeation, although dextran was soluble in water as well as polyoxyethylene. The apparent interaction of myoglobin with dextran may be stronger than that with polyoxyethylene. © 1994 John Wiley & Sons, Inc.     

Development of ultra-deep HDS catalyst for production of clean diesel fuels

Cosmo Oil has successfully developed a new CoMo HDS catalyst, C-606A, for production of ultra-low sulfur diesel fuels. This catalyst was prepared by an impregnation method using a solution containing Co, Mo, P, and citric acid on a HY-Al₂O₃. The resulting catalyst air-dried only without calcination. The HDS activity was measured with straight-run light gas oil feedstocks under industrial hydrotreating conditions. C-606A had a three times higher HDS activity compared with the conventional CoMoP/Al₂O₃ catalyst. Commercial operation with C-606A has successfully demonstrated high performance. This catalyst has superior activity, which enables <10-ppm sulfur content in products in a commercial hydrotreater designed to produce 500-ppm sulfur diesel fuels.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.