NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

Conditional Data Mapping Flip-Flops for Low-Power and High-Performance Systems

This paper introduces a new family of low-power and high-performance flip-flops, namely conditional data mapping flip-flops (CDMFFs), which reduce their dynamic power by mapping their inputs to a configuration that eliminates redundant internal transitions. We present two CDMFFs, having differential and single-ended structures, respectively, and compare them to the state-of-the-art flip-flops. The results indicate that both CDMFFs have the best power-delay product in their groups, respectively. In the aspect of power dissipation, the single-ended and differential CDMFFs consume the least power at data activity less than 50%, and are 31% and 26% less power than the conditional capture flip-flops at 25% data activity, respectively. In the aspect of performance, CDMFFs achieve small data-to-output delays, comparable to those of the transmission-gate pulsed latch and the modified-sense-amplifier flip-flop. In the aspect of timing reliability, CDMFFs have the best internal race immunity among pulse-triggered flip-flops. A post-layout case study is demonstrated with comparison to a transmission-gate flip-flop. The results indicate the single-ended CDMFF has 34% less in data-to-output delay and 28% less in power at 25% data activity, in spite of the 34% increase in size     

Breed differences in the histochemical properties of the M. pubo-ischio-femoralis pars medialis myofibre of domestic cocks

1. Histochemical properties of M. pubo-ischio-femoralis pars medialis (PIF muscle) were compared in 7 breeds of cocks. This muscle was largely composed of Type I fibres and their transitional form (Type I tr). Type IIA fibres were observed in the cranial part. 2. The weight and cross-sectional area of the PIF muscle increased with increasing body weight. However, the relative muscle development to body weight differed among the 7 breeds. 3. A quarter of Type I fibres were of the transitional variety in bantam fowls. Conversely, few, if any, Type I tr fibres were observed in the large breeds where the muscle was poorly developed. 4. As the histochemical properties of Type I fibres made an effective response to the different body weights and the relative PIF muscle development among breeds, it was concluded that PIF muscle performed an important function in supporting the body weight and maintaining posture.     

Serum rheumatoid factor induced by intraperitoneal administration of periodontopathic bacterial lipopolysaccharide in mice

Serum rheumatoid factor (RF) level and peritoneal and splenic CD5+B (B-1) cells in mice were examined after intraperitoneal administration of purified lipopoly-saccharides (LPS) from oral periodontopathic bacteria; Porphyromonas gingivalis, Actinobacillus actinomycetemcomitans, Fusobacterium nucleatum and Capnocytophaga ochracea. F. nucleatum and C. ochracea LPS induced higher levels of serum IgM- and IgG-RF, while P. gingivalis LPS showed the least induction. In addition, wet weights of spleen and serum IgM and IgG concentration were markedly increased in F. nucleatum LPS injected group. On the other hand, the proportion of CD5+ B cells to lymphocytes in the peritoneal cavity and spleen did not increase. The reason for this was not clear but conventional B cells (CD5- B cells) might increase more rapidly with splenic enlargement than CD5+ B cells. These results suggested that RF induced by bacterial LPS may modulate immune responses against bacteria and plays an important role for defence and destruction of periodontal tissue.     

Pulmonary sequestration receiving arterial supply from the right coronary artery. A case report

Pulmonary sequestration is a relatively rare anomaly. The arterial supply usually is derived from the aorta or its major branches. We present a 65-year-old female patient with pulmonary sequestration receiving arterial supply from the right coronary artery, complicated with sick sinus syndrome.     

A shell for signal interpretation expert systems

System monitoring and diagnosis through signal interpretation are important tasks in many engineering fields. Although monitoring or diagnosis expert systems help human experts a lot, it is not so easy to build a signal interpretation expert system. We have developed two expert systems for speech signal processing. The close analysis of the two systems revealed common functions and modules applicable to wide range of signal interpretation problems. On the basis of the experience, we have developed a shell for signal interpretation expert systems named SSI. In order to evaluate SSI, we also developed two expert systems by using it and obtained satisfactory results. This paper describes the design philosophy and architecture of SSI together with some examples.     

Extracellular matrix of opacified anterior capsule after endocapsular cataract surgery

BACKGROUND: We determined the types and distribution of glycosaminoglycans (GAGs) and collagens, in anterior capsular opacification after endocapsular phacoemulsification and aspiration (ECPEA) and intraocular lens implantation. METHODS: Opacified anterior capsules were removed from human eyes after ECPEA. Immunohistochemical staining was performed to determine GAGs with monoclonal antibodies to chondroitin, chondroitin-4-sulfate (C4S), chondroitin-6-sulfate (C6S), dermatan sulfate (DS), and keratan sulfate (KS); collagens with monoclonal antibodies to types I, II, and III collagens; and cellular characteristics with monoclonal antibodies to vimentin, desmin, alpha-smooth muscle actin, and cytokeratin. Decorin mRNA and type I collagen mRNA were detected by in situ hybridization. RESULTS: In the capsules, the C6S, DS, KS, and types I and III collagens were similar to the chemical components found at the adhesion site of the anterior and posterior capsules after extracapsular cataract extraction, and cellular components contained vimentin, desmin, alpha-smooth muscle actin, cytokeratin, decorin mRNA, and type I collagen mRNA. CONCLUSIONS: The GAGs and collagens in opacified anterior capsule after ECPEA were similar to those found during wound healing, although KS is present in normal anterior segment tissue during development and only in the cornea postnatally. These chemical components may be produced by myofibroblast-like cells presumably transformed from lens epithelial cells.     

Crosslinking of amidated polybutadiene with resole. I

Various liquid polybutadiene derivatives were examined as modifiers to improve the brittleness of phenolic resins. Amidated polybutadienes obtained from a maleinated polybutadiene and ammonia had the highest curing tendency when they were reacted with resole under mild conditions. The cured resins were homogeneous and the brittleness of the phenolic resins was remarkably improved. Crosslinking efficiency was closely related to the succinamic acid group of the amidated polybutadiene. Thermal behavior of the succinamic acid group was also related to the effects of curing temperature and curing time on crosslinking. From these observations, cross-condensation between the succinamic acid group of an amidated polybutadiene and resole seemed to have occurred to a great extent than the self-condensation of resole itself and oxidative crosslinking of the amidated polybutadiene.     

Nonlinear repetitive control with application to trajectory control of manipulators

In this article, a new control scheme named repetitive control is proposed for a class of nonlinear systems described by x(t) = Ax(t) + Bu(t) + n(x(t)) and y(t) = Cx(t), in which the controlled variables follow periodic reference commands. The stability condition is derived by applying the passivity theorem. We show how to apply the repetitive control scheme to the trajectory control of a manipulator. A simple repetitive control scheme is developed for the trajectory control of a manipulator by using nonlinear compensation and feedbacks of position and velocity signals. Experimental results for a three link manipulator verify that the proposed repetitive control reduces the tracking error to a very low level.     

Reduced order model predictive control for constrained discrete‐time linear systems

A reduced order model predictive control (MPC) is discussed for constrained discrete‐time linear systems. By employing a decomposition method for finite‐horizon linear systems, an MPC law is obtained from a reduced order optimization problem. The decomposition enables us to construct pairs of initial state and control sequence which have large influence on system responses, and it also characterizes the standard LQ control. The MPC law is obtained based on a combination of the LQ control and dominant input sequences over the prediction horizon. The proposed MPC method is illustrated with numerical examples. Copyright © 2011 John Wiley & Sons, Ltd.