Mechanical/optical behaviors of imogolite hydrogels depending on their compositions and oriented structures

A robust acrylamide (AAm) hydrogel reinforced by imogolite (IG), a perfect rigid nanotubular clay mineral, exhibited distinct tensile stress–strain characteristics and strain‐induced birefringence in accordance with the compositions of the gels. The gel showed a reversible anisotropic/isotropic structural transition in response to stretching/releasing before the breakdown strain. The strain‐induced birefringence of the IG‐reinforced gels could be fixed by the in situ interpenetrating polymerization of other AAm monomers that were impregnated into the gels in the stretched states. This resulted in gels with nonvolatile anisotropic birefringence, and therefore, the fixed anisotropic IG ordering showed specific stress–strain characteristics depending on the orientation of IG. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41691.     

Evaluation of pretreatment with Pleurotus ostreatus for enzymatic hydrolysis of rice straw

The effects of biological pretreatment of rice straw using four white-rot fungi (Phanerochaete chrysosporium, Trametes versicolor, Ceriporiopsis subvermispora, and Pleurotus ostreatus) were evaluated on the basis of quantitative and structural changes in the components of the pretreated rice straw as well as susceptibility to enzymatic hydrolysis. Of these white-rot fungi, P. ostreatus selectively degraded the lignin fraction of rice straw rather than the holocellulose component. When rice straw (water content of 60%) was pretreated with P. ostreatus for 60 d, the total weight loss and the degree of Klason lignin degraded were 25% and 41%, respectively. After the pretreatment, the residual amounts of cellulose and hemicellulose were 83% and 52% of those in untreated rice straw, respectively. By enzymatic hydrolysis with a commercial cellulase preparation for 48 h, 52% holocellulose and 44% cellulose in the pretreated rice straw were solubilized. The net sugar yields based on the amounts of holocellulose and cellulose of untreated rice straw were 33% for total soluble sugar from holocellulose and 32% for glucose from cellulose. The SEM observations showed that the increase in susceptibility of rice straw to enzymatic hydrolysis by pretreatment with P. ostreatus is caused by partial degradation of the lignin seal. When the content of Klason lignin was less than 15% of the total weight of the pretreated straw, enhanced degrees of enzymatic solubilization of holocellulose and cellulose fractions were observed as the content of Klason lignin decreased.     

Sieverts law pressure exponent for hydrogen permeation through Pd-based membranes: Coupled influence of non-ideal diffusion and multicomponent external mass transfer

This paper focuses on the suitability of using a Sieverts-type empirical law to describe hydrogen permeation through Pd-based membranes in the presence of both concentration-dependent hydrogen transport through the selective layer – referred to as “non-ideal” behaviour – and external mass transfer resistance. In particular, the functionality of the pressure exponent with temperature, pressure and membrane thickness is provided, showing that the Sieverts-type empirical law can be used to incorporate the external mass transfer influence just up to a moderate external resistance. The explanation for this fact is recognised in the inadequacy of the Sieverts-type empirical law to describe the behaviour of the flux limited by external resistance for a sufficiently large permeation driving force. The methodology described in this paper is effective also when the permeation-determining steps cannot be established, helping researchers to a correct interpretation of permeation tests in the presence of severe mass transfer resistance.     

Initiator‐free photopolymerization of common acrylate monomers with 254 nm light

Using an available light source at a wavelength of 254 nm, common acrylate monomers were polymerized without any photoinitiators, which was confirmed using Fourier transform IR (FTIR) spectroscopy, ¹H NMR, gel permeation chromatography and fast atom bombardment mass spectrometric measurements. It was found that phenyl acrylate shows higher conversion than n‐ and t‐butyl acrylates. A trifunctional acrylate was also used for UV curing. The cured films were fabricated successfully on different kinds of substrates by using a batch‐ or conveyor‐type irradiation apparatus. It is indicated from FTIR spectral measurements that ca 40%–50% of acryloyl groups are consumed by the photopolymerization. Oxygen concentration in the sample chamber influences the photopolymerization, indicating that the polymerization proceeds via a radical process. © 2018 Society of Chemical Industry     

Study on the Microstructure and Liquid Phase Formation in a Semisolid Gray Cast Iron

The development of high-quality semisolid raw materials requires an understanding of the phase transformations that occur as the material is heated up to the semisolid state, i.e., its melting behavior. The microstructure of the material plays a very important role during semisolid processing as it determines the flow behavior of the material when it is formed, making a thorough understanding of the microstructural evolution essential. In this study, the phase transformations and microstructural evolution in Fe2.5C1.5Si gray cast iron specially designed for thixoforming processes as it was heated to the semisolid state were observed using in situ high-temperature confocal laser scanning microscopy. At room temperature, the alloy has a matrix of pearlite and ferrite with fine interdendritic type D flake graphite. During heating, the main transformations observed were graphite precipitation inside the grains and at the austenite grain boundaries; graphite flakes and graphite precipitates growing and becoming coarser with the increasing temperature; and the beginning of melting at around 1413 K to 1423 K (1140 °C to 1150 °C). Melting begins with the eutectic phase (i.e., the carbon-rich phase) and continues with the primary phase (primary austenite), which is consumed as the temperature increases. Melting of the eutectic phase composed by coarsened interdendritic graphite flakes produced a semi-continuous liquid network homogeneously surrounding and wetting the dendrites of the solid phase, causing grains to detach from each other and producing the intended solid globules immersed in liquid.     

Stability of Saul'yev's Methods with Nonuniform Grids

Stability of Saul'yev's methods for heat conduction with nonuniform grids is investigated. Though these methods are known to be unconditionally stable with uniform grids, the author shows that their stability with nonuniform grids depends on time step Δ τ, space intervals Δ X, and ratios of neighboring space intervals. The author also shows that physical reality is broken when Patankar's positive-coefficients rule is not satisfied, even if the methods are applied to uniform grids. This article presents a stability criterion for Saul'yev's methods with both nonuniform and uniform grids.